[Thu Jun  7 23:38:06 2012] Detection parameters:
  Position = (453.1, 253.2) = 14 44 4.50 29 14 12.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1516.5 +/- 47.5
  Background counts = 33.8
  Rate = 0.04 +/- 0.001

[Thu Jun  7 23:38:07 2012] Off-axis axis estimate = 11.68'
[Fri Jun  8 00:09:33 2012] Using EEF radius (= 12.27 ")to estimate initial spatial extent for simple fitting
[Fri Jun  8 00:09:33 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Jun  8 00:09:33 2012] Initial guess for spatial extent in simple fitting = 12.27"
[Fri Jun  8 00:09:33 2012] source mask rpix=2.8, npix_max = 44, mask sum = 42, frac = 0.952
[Fri Jun  8 00:09:33 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 12.27"
[Fri Jun  8 00:40:35 2012] fullrun_mos1_xmm0103060201_pi300-10000_cl_pass0_src1.ximg exists
[Fri Jun  8 00:40:35 2012] fullrun_mos1_xmm0103060201_pi300-10000_cl_pass0_src1_1.ximg exists
[Fri Jun  8 00:40:35 2012] Fit fullrun_mos1_xmm0103060201_pi300-10000_cl_pass0_src1 appears to have run properly
[Fri Jun  8 00:40:36 2012] fullrun_mos1_xmm0103060201_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Fri Jun  8 00:40:36 2012] fullrun_mos1_xmm0103060201_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Fri Jun  8 00:40:36 2012] Fit fullrun_mos1_xmm0103060201_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Fri Jun  8 01:13:34 2012] Spatial fit model total counts = 1775.090000, observed total counts = 1687.000000
[Fri Jun  8 01:13:34 2012] Offset between fit and detection position for source 1 = 0.306118 pixels
[Fri Jun  8 01:13:34 2012] 1776.025000 total counts/ 657.115000 bgd. counts: snr = 43.649017
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.306118 pixels
  Position = (452.8, 253.3) = 14 44 4.60 29 14 11.9
  Extent = 8.9" x 4.8", rotation angle = 111
  Source counts = 1118.9 +/- 42.1
  Background counts = 657.1
  Rate = 0.03 +/- 0.001
[Fri Jun  8 01:13:34 2012] Vigneting correction estimate = 1.000000
[Fri Jun  8 01:13:34 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun  8 01:13:34 2012] Assessing source extent using major
[Fri Jun  8 01:13:34 2012] Source does appear to be extended
[Fri Jun  8 01:13:34 2012] Computing asymmetry using major and minor axis, asym = 1.84
[Fri Jun  8 01:13:34 2012] Source is asymmetric
[Fri Jun  8 01:37:53 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Jun  8 01:37:53 2012] Initial guess for spatial extent in simple fitting = 6.87"
[Fri Jun  8 01:37:53 2012] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.925
[Fri Jun  8 01:37:53 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 6.87"
[Fri Jun  8 02:07:52 2012] fullrun_mos1_xmm0103060201_pi300-10000_cl_pass1_src1.ximg exists
[Fri Jun  8 02:07:52 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0103060201_pi300-10000_cl_pass1_src1.csv
[Fri Jun  8 02:07:52 2012] fullrun_mos1_xmm0103060201_pi300-10000_cl_pass1_src1_1.ximg exists
[Fri Jun  8 02:07:52 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0103060201_pi300-10000_cl_pass1_src1.csv
[Fri Jun  8 02:07:52 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0103060201_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0103060201_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun  8 02:07:52 2012] fullrun_mos1_xmm0103060201_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Fri Jun  8 02:07:52 2012] fullrun_mos1_xmm0103060201_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Fri Jun  8 02:07:52 2012] Fit fullrun_mos1_xmm0103060201_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Fri Jun  8 02:42:08 2012] Spatial fit model total counts = 1423.000000, observed total counts = 1423.000000
[Fri Jun  8 02:42:08 2012] Offset between fit and detection position for source 1 = 0.024958 pixels
[Fri Jun  8 02:42:08 2012] 1424.251000 total counts/ 446.678000 bgd. counts: snr = 46.254279
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.024958 pixels
  Position = (452.8, 253.3) = 14 44 4.60 29 14 12.0
  Extent = 6.4 (6.0-6.8)", rotation angle = 0
  Source counts = 977.6 +/- 37.7
  Background counts = 446.7
  Rate = 0.03 +/- 0.001
[Fri Jun  8 02:42:08 2012] Vigneting correction estimate = 1.000000
[Fri Jun  8 02:42:08 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun  8 02:42:08 2012] Assessing source extent using major axis lower bound
[Fri Jun  8 02:42:08 2012] Source does appear to be extended
[Fri Jun  8 02:42:08 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun  8 03:18:27 2012] XMMSAS src. selection expression = ellipse(39341.940600, 21991.791000, 381.164411, 381.164411, 0.000000, X, Y)
[Fri Jun  8 03:18:27 2012] Writing source region out to fullrun_mos1_xmm0103060201_pi300-10000_pass1_cl_src1_src.reg
[Fri Jun  8 03:18:27 2012] Extracting stamp from image fullrun_mos1_xmm0103060201_pi300-10000_cl_sm2.00.img.gz, (431, 231) - (475, 275)
[Fri Jun  8 03:18:27 2012] XMMSAS bgd. selection expression = annulus(39341.940600, 21991.791000, 635.274018, 1270.548037, X, Y) && !ellipse(37587.546539, 23098.130371, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Jun  8 03:18:27 2012] Writing fullrun_mos1_xmm0103060201_pi300-10000_pass1_cl_src1.gif
[Fri Jun  8 03:18:30 2012] Mean detx,y = (-8884.84, 10451.90) 
[Fri Jun  8 03:18:31 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Jun  8 03:18:37 2012] Binned source spectrum to 10 counts/bin
[Fri Jun  8 03:18:37 2012] Setting source spectrum file to fullrun_mos1_xmm0103060201_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Fri Jun  8 03:18:37 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0103060201_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Fri Jun  8 03:54:39 2012] Updating aperture counts using extracted products
[Fri Jun  8 03:54:39 2012] Error reading totcts from fullrun_mos1_xmm0103060201_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Fri Jun  8 03:54:39 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jun  8 03:54:39 2012] Using photon index=1.80, rate=0.0284, arf fullrun_mos1_xmm0103060201_pi300-10000_pass1_cl_src1.arf
[Fri Jun  8 03:54:39 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jun  8 03:54:40 2012] Updating source flux to 5.8e-13
[Fri Jun  8 03:55:03 2012] Reading fit data from xmm0103060201/analysis//spectral/fullrun_mos1_xmm0103060201_pi300-10000_pass1_cl_src1_pl.csv
[Fri Jun  8 03:55:03 2012] Spectral fit parameter nH value = 194771000000.0
[Fri Jun  8 03:55:03 2012] Spectral fit parameter PhoIndex value = 2.6716
[Fri Jun  8 03:55:03 2012] Failed to get F(0.3-8.0) from xmm0103060201/analysis//spectral/fullrun_mos1_xmm0103060201_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Fri Jun  8 03:55:03 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jun  8 03:55:03 2012] Using Nh = 1.9e+11, photon index=2.67, rate=0.0284, arf fullrun_mos1_xmm0103060201_pi300-10000_pass1_cl_src1.arf
[Fri Jun  8 03:55:03 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jun  8 03:55:03 2012] Updating source flux to 4.4e-13