[Tue Jun  5 14:26:07 2012] Detection parameters:
  Position = (279.8, 284.1) = 21 29 12.16 -15 38 40.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 21705.5 +/- 174.5
  Background counts = 14.3
  Rate = 1 +/- 0.008

[Tue Jun  5 14:26:08 2012] Off-axis axis estimate = 1.71'
[Tue Jun  5 15:40:19 2012] Using EEF radius (= 7.28 ")to estimate initial spatial extent for simple fitting
[Tue Jun  5 15:40:19 2012] Initial guess for spatial extent in simple fitting = 7.28"
[Tue Jun  5 15:40:19 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.846
[Tue Jun  5 15:40:19 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.28"
[Tue Jun  5 16:28:57 2012] fullrun_mos2_xmm0103060101_pi300-10000_cl_pass0_src1.ximg exists
[Tue Jun  5 16:28:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0103060101_pi300-10000_cl_pass0_src1.csv
[Tue Jun  5 16:28:57 2012] fullrun_mos2_xmm0103060101_pi300-10000_cl_pass0_src1_1.ximg exists
[Tue Jun  5 16:28:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0103060101_pi300-10000_cl_pass0_src1.csv
[Tue Jun  5 16:28:57 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0103060101_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0103060101_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun  5 16:28:57 2012] fullrun_mos2_xmm0103060101_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Tue Jun  5 16:28:57 2012] fullrun_mos2_xmm0103060101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Tue Jun  5 16:28:57 2012] Fit fullrun_mos2_xmm0103060101_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Tue Jun  5 16:29:16 2012] Spatial fit model total counts = 20075.900000, observed total counts = 19266.000000
[Tue Jun  5 16:29:16 2012] Offset between fit and detection position for source 1 = 0.095070 pixels
[Tue Jun  5 16:29:16 2012] 20002.030000 total counts/ 4689.130000 bgd. counts: snr = 223.620343
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.095070 pixels
  Position = (279.8, 284.2) = 21 29 12.15 -15 38 40.7
  Extent = 5.6 (5.5-5.6)", rotation angle = 0
  Source counts = 15312.9 +/- 141.4
  Background counts = 4689.1
  Rate = 0.7 +/- 0.006
[Tue Jun  5 16:29:16 2012] Vigneting correction estimate = 1.000000
[Tue Jun  5 16:29:16 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jun  5 16:29:16 2012] Assessing source extent using major axis lower bound
[Tue Jun  5 16:29:16 2012] Source does appear to be extended
[Tue Jun  5 16:29:16 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jun  5 17:14:21 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Jun  5 17:14:21 2012] Initial guess for spatial extent in simple fitting = 5.57"
[Tue Jun  5 17:14:21 2012] source mask rpix=1.3, npix_max = 12, mask sum = 16, frac = 1.263
[Tue Jun  5 17:14:21 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 5.57"
[Tue Jun  5 17:46:43 2012] fullrun_mos2_xmm0103060101_pi300-10000_cl_pass1_src1.ximg exists
[Tue Jun  5 17:46:43 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0103060101_pi300-10000_cl_pass1_src1.csv
[Tue Jun  5 17:46:43 2012] fullrun_mos2_xmm0103060101_pi300-10000_cl_pass1_src1_1.ximg exists
[Tue Jun  5 17:46:43 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0103060101_pi300-10000_cl_pass1_src1.csv
[Tue Jun  5 17:46:43 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0103060101_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0103060101_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun  5 17:46:43 2012] fullrun_mos2_xmm0103060101_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Tue Jun  5 17:46:43 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0103060101_pi300-10000_cl_pass1_tfrozen_src1.csv
[Tue Jun  5 17:46:43 2012] fullrun_mos2_xmm0103060101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Tue Jun  5 17:46:43 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0103060101_pi300-10000_cl_pass1_tfrozen_src1.csv
[Tue Jun  5 17:46:43 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0103060101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0103060101_pi300-10000_cl_pass1_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun  5 17:46:55 2012] Warning, spatial fit 1 centroid is now closest to src. 13
[Tue Jun  5 17:46:55 2012] Vigneting correction estimate = 1.000000
[Tue Jun  5 17:46:55 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jun  5 17:46:55 2012] Assessing source extent using major axis lower bound
[Tue Jun  5 17:46:55 2012] Source does appear to be extended
[Tue Jun  5 17:46:55 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jun  5 19:04:48 2012] Counts = 15312.900000, rescaling region sizes by 3.000000
[Tue Jun  5 19:04:48 2012] XMMSAS src. selection expression = ellipse(24293.606400, 24674.953200, 1001.788229, 1001.788229, 0.000000, X, Y)
[Tue Jun  5 19:04:48 2012] Writing source region out to fullrun_mos2_xmm0103060101_pi300-10000_pass1_cl_src1_src.reg
[Tue Jun  5 19:04:48 2012] Extracting stamp from image fullrun_mos2_xmm0103060101_pi300-10000_cl_sm2.00.img.gz, (222, 227) - (337, 342)
[Tue Jun  5 19:04:48 2012] XMMSAS bgd. selection expression = annulus(24293.606400, 24674.953200, 5008.941144, 10017.882288, X, Y) && !ellipse(23764.709991, 16375.095718, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21435.401940, 16649.570000, 560.857616, 560.857616, 0.000000, X, Y) && !ellipse(25029.678000, 34287.943400, 653.296819, 653.296819, 0.000000, X, Y) && !ellipse(23712.052795, 25529.826569, 870.000000, 870.000000, 0.000000, X, Y)
[Tue Jun  5 19:04:48 2012] Writing fullrun_mos2_xmm0103060101_pi300-10000_pass1_cl_src1.gif
[Tue Jun  5 19:04:55 2012] Mean detx,y = (11.03, 28.94) 
[Tue Jun  5 19:04:58 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Jun  5 19:09:46 2012] Binned source spectrum to 10 counts/bin
[Tue Jun  5 19:09:46 2012] Setting source spectrum file to fullrun_mos2_xmm0103060101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Tue Jun  5 19:09:46 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0103060101_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Tue Jun  5 19:29:20 2012] Updating aperture counts using extracted products
[Tue Jun  5 19:29:20 2012] Error reading totcts from fullrun_mos2_xmm0103060101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Tue Jun  5 19:29:20 2012] Calculating source flux in energy range 0.30-8.00
[Tue Jun  5 19:29:20 2012] Using photon index=1.80, rate=0.671, arf fullrun_mos2_xmm0103060101_pi300-10000_pass1_cl_src1.arf
[Tue Jun  5 19:29:20 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jun  5 19:29:20 2012] Updating source flux to 6.8e-12
[Tue Jun  5 19:30:51 2012] Reading fit data from xmm0103060101/analysis//spectral/fullrun_mos2_xmm0103060101_pi300-10000_pass1_cl_src1_pl.csv
[Tue Jun  5 19:30:51 2012] Spectral fit parameter nH value = 1.12656e+21
[Tue Jun  5 19:30:51 2012] Spectral fit parameter PhoIndex value = 1.51908
[Tue Jun  5 19:30:51 2012] Failed to get F(0.3-8.0) from xmm0103060101/analysis//spectral/fullrun_mos2_xmm0103060101_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Tue Jun  5 19:30:51 2012] Calculating source flux in energy range 0.30-8.00
[Tue Jun  5 19:30:51 2012] Using Nh = 1.1e+21, photon index=1.52, rate=0.671, arf fullrun_mos2_xmm0103060101_pi300-10000_pass1_cl_src1.arf
[Tue Jun  5 19:30:51 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jun  5 19:30:51 2012] Updating source flux to 8.7e-12