[Thu Jan 26 18:57:30 2012] Detection parameters:
  Position = (305.4, 491.9) = 1 33 37.42 30 46 11.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 68.5 +/- 11.2
  Background counts = 10.4
  Rate = 0.007 +/- 0.001

[Thu Jan 26 18:57:31 2012] Off-axis axis estimate = 14.03'
[Thu Jan 26 18:59:11 2012] Using EEF radius (= 13.45 ")to estimate initial spatial extent for simple fitting
[Thu Jan 26 18:59:11 2012] Initial guess for spatial extent in simple fitting = 13.45"
[Thu Jan 26 18:59:11 2012] source mask rpix=3.1, npix_max = 51, mask sum = 37, frac = 0.717
[Thu Jan 26 18:59:11 2012] Giving source the simple spatial ID 8 for pass 0, mean size = 13.45"
[Thu Jan 26 20:52:32 2012] fullrun_pn_xmm0102642301_pi300-10000_cl_pass0_src8.ximg exists
[Thu Jan 26 20:52:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0102642301_pi300-10000_cl_pass0_src8.csv
[Thu Jan 26 20:52:32 2012] fullrun_pn_xmm0102642301_pi300-10000_cl_pass0_src8_1.ximg exists
[Thu Jan 26 20:52:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0102642301_pi300-10000_cl_pass0_src8.csv
[Thu Jan 26 20:52:32 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0102642301_pi300-10000_cl_pass0_src8_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0102642301_pi300-10000_cl_pass0_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jan 26 20:52:33 2012] fullrun_pn_xmm0102642301_pi300-10000_cl_pass0_tfrozen_src8.ximg exists
[Thu Jan 26 20:52:33 2012] fullrun_pn_xmm0102642301_pi300-10000_cl_pass0_tfrozen_src8_1.ximg exists
[Thu Jan 26 20:52:33 2012] Fit fullrun_pn_xmm0102642301_pi300-10000_cl_pass0_tfrozen_src8 appears to have run properly
[Thu Jan 26 21:51:22 2012] Warning, spatial fit 8 centroid is now closest to src. 10
[Thu Jan 26 21:51:22 2012] Source 9 is offset by -7.673134 and -3.176186 pixels which is larger than
2 X fitted extent = 1.507425 x 1.507425, not incorporating fit results
[Thu Jan 26 21:51:22 2012] Source 9 is offset by -4.440536 and 3.056412 pixels which is larger than
2 X fitted extent = 1.478354 x 1.478354, not incorporating fit results
[Thu Jan 26 21:51:22 2012] Vigneting correction estimate = 1.000000
[Thu Jan 26 21:51:22 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jan 26 21:51:22 2012] Assessing source extent using major
[Thu Jan 26 21:51:22 2012] Source does appear to be extended
[Thu Jan 26 21:51:22 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jan 26 21:51:22 2012] Source is confused with source 10
[Thu Jan 26 21:51:36 2012] Using EEF radius (= 13.45 ")to estimate initial spatial extent for simple fitting
[Thu Jan 26 21:51:36 2012] Initial guess for spatial extent in simple fitting = 13.45"
[Thu Jan 26 21:51:36 2012] source mask rpix=3.1, npix_max = 51, mask sum = 37, frac = 0.717
[Thu Jan 26 21:51:36 2012] Giving source the simple spatial ID 8 for pass 1, mean size = 13.45"
[Thu Jan 26 23:28:41 2012] fullrun_pn_xmm0102642301_pi300-10000_cl_pass1_src8.ximg exists
[Thu Jan 26 23:28:41 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0102642301_pi300-10000_cl_pass1_src8.csv
[Thu Jan 26 23:28:41 2012] fullrun_pn_xmm0102642301_pi300-10000_cl_pass1_src8_1.ximg exists
[Thu Jan 26 23:28:41 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0102642301_pi300-10000_cl_pass1_src8.csv
[Thu Jan 26 23:28:41 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0102642301_pi300-10000_cl_pass1_src8_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0102642301_pi300-10000_cl_pass1_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jan 26 23:28:41 2012] fullrun_pn_xmm0102642301_pi300-10000_cl_pass1_tfrozen_src8.ximg exists
[Thu Jan 26 23:28:41 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0102642301_pi300-10000_cl_pass1_tfrozen_src8.csv
[Thu Jan 26 23:28:41 2012] fullrun_pn_xmm0102642301_pi300-10000_cl_pass1_tfrozen_src8_1.ximg exists
[Thu Jan 26 23:28:41 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0102642301_pi300-10000_cl_pass1_tfrozen_src8.csv
[Thu Jan 26 23:28:41 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0102642301_pi300-10000_cl_pass1_tfrozen_src8_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0102642301_pi300-10000_cl_pass1_tfrozen_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jan 27 00:37:27 2012] Warning, spatial fit 8 centroid is now closest to src. 17
[Fri Jan 27 00:37:27 2012] Warning: source 11 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 9 at 25.700323 pixels away
[Fri Jan 27 00:37:28 2012] Vigneting correction estimate = 1.000000
[Fri Jan 27 00:37:28 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jan 27 00:37:28 2012] Assessing source extent using major
[Fri Jan 27 00:37:28 2012] Source does appear to be extended
[Fri Jan 27 00:37:28 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jan 27 00:37:41 2012] XMMSAS src. selection expression = ellipse(26520.107361, 42745.341858, 652.500000, 652.500000, 0.000000, X, Y)
[Fri Jan 27 00:37:41 2012] Writing source region out to fullrun_pn_xmm0102642301_pi300-10000_pass1_cl_src9_src.reg
[Fri Jan 27 00:37:41 2012] Extracting stamp from image fullrun_pn_xmm0102642301_pi300-10000_cl_sm2.00.img.gz, (268, 454) - (343, 529)
[Fri Jan 27 00:37:41 2012] XMMSAS bgd. selection expression = annulus(26520.107361, 42745.341858, 1087.500000, 2175.000000, X, Y) && !ellipse(26520.946350, 43516.521667, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26345.450400, 42190.188000, 765.876822, 765.876822, 0.000000, X, Y) && !ellipse(26180.320800, 41714.714000, 1091.808031, 1091.808031, 0.000000, X, Y) && !ellipse(25414.526200, 40053.466000, 880.824025, 880.824025, 0.000000, X, Y) && !ellipse(27132.388977, 44285.479218, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28627.324400, 41467.384800, 653.796819, 247.647207, 5.827960, X, Y) && !ellipse(24883.403880, 39015.151200, 1910.408055, 297.074409, 115.288600, X, Y)
[Fri Jan 27 00:37:41 2012] Writing fullrun_pn_xmm0102642301_pi300-10000_pass1_cl_src9.gif
[Fri Jan 27 00:45:17 2012] Mean detx,y = (-7237.97, -14173.09) 
[Fri Jan 27 00:45:20 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Jan 27 00:45:35 2012] Binned source spectrum to 10 counts/bin
[Fri Jan 27 00:45:36 2012] Setting source spectrum file to fullrun_pn_xmm0102642301_pi300-10000_pass1_cl_src9_src_b10.pi.gz
[Fri Jan 27 00:45:36 2012] Setting bgd. spectrum file to fullrun_pn_xmm0102642301_pi300-10000_pass1_cl_src9_bgd.pi.gz
[Fri Jan 27 01:10:50 2012] Not generating rmf since there are only 68 counts
[Fri Jan 27 01:10:50 2012] rmf not generated due to insufficient counts
[Fri Jan 27 02:34:50 2012] Updating aperture counts using extracted products
[Fri Jan 27 02:34:50 2012] Error reading totcts from fullrun_pn_xmm0102642301_pi300-10000_pass1_cl_src9_src_b10.pi.gz
[Fri Jan 27 02:34:51 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jan 27 02:34:51 2012] Using photon index=1.80, rate=0.00685, arf fullrun_pn_xmm0102642301_pi300-10000_pass1_cl_src9.arf
[Fri Jan 27 02:34:51 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jan 27 02:34:51 2012] Updating source flux to 6e-13
[Fri Jan 27 02:36:31 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting