[Thu Jan 26 18:57:30 2012] Detection parameters:
  Position = (265.4, 400.8) = 1 33 50.90 30 39 37.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 27985.4 +/- 194.4
  Background counts = 14.9
  Rate = 3 +/- 0.02

[Thu Jan 26 18:57:31 2012] Off-axis axis estimate = 7.80'
[Thu Jan 26 18:59:11 2012] Using EEF radius (= 10.33 ")to estimate initial spatial extent for simple fitting
[Thu Jan 26 18:59:11 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Jan 26 18:59:11 2012] Initial guess for spatial extent in simple fitting = 10.33"
[Thu Jan 26 18:59:11 2012] source mask rpix=2.4, npix_max = 33, mask sum = 22, frac = 0.666
[Thu Jan 26 18:59:11 2012] Giving source the simple spatial ID 3 for pass 0, mean size = 10.33"
[Thu Jan 26 20:52:32 2012] fullrun_pn_xmm0102642301_pi300-10000_cl_pass0_src3.ximg exists
[Thu Jan 26 20:52:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0102642301_pi300-10000_cl_pass0_src3.csv
[Thu Jan 26 20:52:32 2012] fullrun_pn_xmm0102642301_pi300-10000_cl_pass0_src3_1.ximg exists
[Thu Jan 26 20:52:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0102642301_pi300-10000_cl_pass0_src3.csv
[Thu Jan 26 20:52:32 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0102642301_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0102642301_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jan 26 20:52:33 2012] fullrun_pn_xmm0102642301_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Thu Jan 26 20:52:33 2012] fullrun_pn_xmm0102642301_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Thu Jan 26 20:52:33 2012] Fit fullrun_pn_xmm0102642301_pi300-10000_cl_pass0_tfrozen_src3 appears to have run properly
[Thu Jan 26 21:51:22 2012] Warning: source 3 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 3 at 13.000684 pixels away
[Thu Jan 26 21:51:22 2012] Vigneting correction estimate = 1.000000
[Thu Jan 26 21:51:22 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jan 26 21:51:22 2012] Assessing source extent using major
[Thu Jan 26 21:51:22 2012] Source does appear to be extended
[Thu Jan 26 21:51:22 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jan 26 21:51:36 2012] Using EEF radius (= 10.33 ")to estimate initial spatial extent for simple fitting
[Thu Jan 26 21:51:36 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Jan 26 21:51:36 2012] Initial guess for spatial extent in simple fitting = 10.33"
[Thu Jan 26 21:51:36 2012] source mask rpix=2.4, npix_max = 33, mask sum = 22, frac = 0.666
[Thu Jan 26 21:51:36 2012] Giving source the simple spatial ID 3 for pass 1, mean size = 10.33"
[Thu Jan 26 23:28:41 2012] fullrun_pn_xmm0102642301_pi300-10000_cl_pass1_src3.ximg exists
[Thu Jan 26 23:28:41 2012] fullrun_pn_xmm0102642301_pi300-10000_cl_pass1_src3_1.ximg exists
[Thu Jan 26 23:28:41 2012] Fit fullrun_pn_xmm0102642301_pi300-10000_cl_pass1_src3 appears to have run properly
[Thu Jan 26 23:28:41 2012] fullrun_pn_xmm0102642301_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Thu Jan 26 23:28:41 2012] fullrun_pn_xmm0102642301_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Thu Jan 26 23:28:41 2012] Fit fullrun_pn_xmm0102642301_pi300-10000_cl_pass1_tfrozen_src3 appears to have run properly
[Fri Jan 27 00:37:27 2012] Spatial fit model total counts = 25203.700000, observed total counts = 25580.000000
[Fri Jan 27 00:37:27 2012] Offset between fit and detection position for source 3 = 0.170241 pixels
[Fri Jan 27 00:37:27 2012] 25490.600000 total counts/ 4268.200000 bgd. counts: snr = 324.841955
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.170241 pixels
  Position = (265.5, 400.9) = 1 33 50.86 30 39 36.3
  Extent = 5.5 (5.5-5.5)", rotation angle = 0
  Source counts = 21222.4 +/- 159.7
  Background counts = 4268.2
  Rate = 2 +/- 0.02
[Fri Jan 27 00:37:28 2012] Vigneting correction estimate = 1.000000
[Fri Jan 27 00:37:28 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jan 27 00:37:28 2012] Assessing source extent using major axis lower bound
[Fri Jan 27 00:37:28 2012] Source does appear to be extended
[Fri Jan 27 00:37:28 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jan 27 00:37:41 2012] Counts = 21222.400000, rescaling region sizes by 3.000000
[Fri Jan 27 00:37:41 2012] XMMSAS src. selection expression = ellipse(23052.972000, 34830.659600, 982.238428, 982.238428, 0.000000, X, Y)
[Fri Jan 27 00:37:41 2012] Writing source region out to fullrun_pn_xmm0102642301_pi300-10000_pass1_cl_src3_src.reg
[Fri Jan 27 00:37:41 2012] Extracting stamp from image fullrun_pn_xmm0102642301_pi300-10000_cl_sm2.00.img.gz, (209, 344) - (322, 457)
[Fri Jan 27 00:37:41 2012] XMMSAS bgd. selection expression = annulus(23052.972000, 34830.659600, 4911.192141, 9822.384283, X, Y) && !ellipse(27369.956440, 25942.792400, 441.222413, 418.547212, 27.599874, X, Y) && !ellipse(33125.671000, 33724.382600, 464.966413, 464.966413, 0.000000, X, Y) && !ellipse(29899.208282, 40170.385590, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26520.946350, 43516.521667, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26520.107361, 42745.341858, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26345.450400, 42190.188000, 765.876822, 765.876822, 0.000000, X, Y) && !ellipse(26180.320800, 41714.714000, 1091.808031, 1091.808031, 0.000000, X, Y) && !ellipse(25414.526200, 40053.466000, 880.824025, 880.824025, 0.000000, X, Y) && !ellipse(25162.610000, 39505.898000, 577.434417, 577.434417, 0.000000, X, Y) && !ellipse(28647.585200, 38027.051000, 658.529619, 658.529619, 0.000000, X, Y) && !ellipse(28103.436600, 27529.845200, 288.760008, 288.760008, 0.000000, X, Y) && !ellipse(22017.212200, 27114.429400, 411.180812, 411.180812, 0.000000, X, Y) && !ellipse(27132.388977, 44285.479218, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28627.324400, 41467.384800, 653.796819, 247.647207, 5.827960, X, Y) && !ellipse(32192.867600, 41271.798000, 2065.876783, 2065.876783, 0.000000, X, Y) && !ellipse(24883.403880, 39015.151200, 1910.408055, 297.074409, 115.288600, X, Y) && !ellipse(24603.043457, 38323.422424, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24289.529633, 37622.234497, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24133.258000, 37083.594000, 768.564822, 768.564822, 0.000000, X, Y) && !ellipse(23851.216156, 36638.572693, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22363.576691, 35283.323608, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33334.242706, 34963.873138, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17924.111496, 35008.541351, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25348.700080, 33912.454400, 352.281610, 352.281610, 0.000000, X, Y) && !ellipse(21726.448000, 31842.468800, 458.585613, 458.585613, 0.000000, X, Y) && !ellipse(21507.974800, 31382.894000, 369.272811, 369.272811, 0.000000, X, Y) && !ellipse(20357.957000, 25237.639000, 585.843217, 585.843217, 0.000000, X, Y) && !ellipse(24187.234600, 32681.062600, 474.680014, 474.680014, 0.000000, X, Y) && !ellipse(29994.659241, 29637.085205, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28342.140200, 28441.550000, 900.216026, 900.216026, 0.000000, X, Y) && !ellipse(23763.388800, 26964.374200, 596.952817, 264.537608, 59.561411, X, Y)
[Fri Jan 27 00:37:41 2012] Writing fullrun_pn_xmm0102642301_pi300-10000_pass1_cl_src3.gif
[Fri Jan 27 00:39:46 2012] Mean detx,y = (-7256.97, -5522.97) 
[Fri Jan 27 00:39:49 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Jan 27 00:42:45 2012] Binned source spectrum to 10 counts/bin
[Fri Jan 27 00:42:45 2012] Setting source spectrum file to fullrun_pn_xmm0102642301_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Fri Jan 27 00:42:45 2012] Setting bgd. spectrum file to fullrun_pn_xmm0102642301_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Fri Jan 27 02:34:50 2012] Updating aperture counts using extracted products
[Fri Jan 27 02:34:50 2012] Error reading totcts from fullrun_pn_xmm0102642301_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Fri Jan 27 02:34:51 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jan 27 02:34:51 2012] Using photon index=1.80, rate=2.12, arf fullrun_pn_xmm0102642301_pi300-10000_pass1_cl_src3.arf
[Fri Jan 27 02:34:51 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jan 27 02:34:51 2012] Updating source flux to 1.2e-11