[Thu Jan 26 18:57:30 2012] Detection parameters:
  Position = (257.6, 406.1) = 1 33 53.53 30 40 3.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 60.0 +/- 12.7
  Background counts = 13.8
  Rate = 0.006 +/- 0.001

[Thu Jan 26 18:57:31 2012] Off-axis axis estimate = 8.35'
[Thu Jan 26 18:59:11 2012] Using EEF radius (= 10.60 ")to estimate initial spatial extent for simple fitting
[Thu Jan 26 18:59:11 2012] Initial guess for spatial extent in simple fitting = 10.60"
[Thu Jan 26 18:59:11 2012] source mask rpix=2.4, npix_max = 34, mask sum = 23, frac = 0.666
[Thu Jan 26 18:59:11 2012] Giving source the simple spatial ID 28 for pass 0, mean size = 10.60"
[Thu Jan 26 20:52:33 2012] fullrun_pn_xmm0102642301_pi300-10000_cl_pass0_src28.ximg exists
[Thu Jan 26 20:52:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0102642301_pi300-10000_cl_pass0_src28.csv
[Thu Jan 26 20:52:33 2012] fullrun_pn_xmm0102642301_pi300-10000_cl_pass0_src28_1.ximg exists
[Thu Jan 26 20:52:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0102642301_pi300-10000_cl_pass0_src28.csv
[Thu Jan 26 20:52:33 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0102642301_pi300-10000_cl_pass0_src28_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0102642301_pi300-10000_cl_pass0_src28.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jan 26 20:52:34 2012] fullrun_pn_xmm0102642301_pi300-10000_cl_pass0_tfrozen_src28.ximg exists
[Thu Jan 26 20:52:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0102642301_pi300-10000_cl_pass0_tfrozen_src28.csv
[Thu Jan 26 20:52:34 2012] fullrun_pn_xmm0102642301_pi300-10000_cl_pass0_tfrozen_src28_1.ximg exists
[Thu Jan 26 20:52:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0102642301_pi300-10000_cl_pass0_tfrozen_src28.csv
[Thu Jan 26 20:52:34 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0102642301_pi300-10000_cl_pass0_tfrozen_src28_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0102642301_pi300-10000_cl_pass0_tfrozen_src28.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jan 26 21:51:22 2012] Warning: source 28 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 29 at 11.516331 pixels away
[Thu Jan 26 21:51:22 2012] Vigneting correction estimate = 1.000000
[Thu Jan 26 21:51:22 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jan 26 21:51:22 2012] Assessing source extent using major
[Thu Jan 26 21:51:22 2012] Source does appear to be extended
[Thu Jan 26 21:51:22 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jan 26 21:51:36 2012] Using EEF radius (= 10.60 ")to estimate initial spatial extent for simple fitting
[Thu Jan 26 21:51:36 2012] Initial guess for spatial extent in simple fitting = 10.60"
[Thu Jan 26 21:51:36 2012] source mask rpix=2.4, npix_max = 34, mask sum = 23, frac = 0.666
[Thu Jan 26 21:51:36 2012] Giving source the simple spatial ID 27 for pass 1, mean size = 10.60"
[Thu Jan 26 23:28:41 2012] fullrun_pn_xmm0102642301_pi300-10000_cl_pass1_src27.ximg exists
[Thu Jan 26 23:28:41 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0102642301_pi300-10000_cl_pass1_src27.csv
[Thu Jan 26 23:28:41 2012] fullrun_pn_xmm0102642301_pi300-10000_cl_pass1_src27_1.ximg exists
[Thu Jan 26 23:28:41 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0102642301_pi300-10000_cl_pass1_src27.csv
[Thu Jan 26 23:28:41 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0102642301_pi300-10000_cl_pass1_src27_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0102642301_pi300-10000_cl_pass1_src27.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jan 26 23:28:42 2012] fullrun_pn_xmm0102642301_pi300-10000_cl_pass1_tfrozen_src27.ximg exists
[Thu Jan 26 23:28:42 2012] fullrun_pn_xmm0102642301_pi300-10000_cl_pass1_tfrozen_src27_1.ximg exists
[Thu Jan 26 23:28:42 2012] Fit fullrun_pn_xmm0102642301_pi300-10000_cl_pass1_tfrozen_src27 appears to have run properly
[Fri Jan 27 00:37:28 2012] Source 29 is offset by -7.602383 and 5.767168 pixels which is larger than
2 X fitted extent = 2.019292 x 2.019292, not incorporating fit results
[Fri Jan 27 00:37:28 2012] Warning: source 32 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 29 at 48.442249 pixels away
[Fri Jan 27 00:37:28 2012] Vigneting correction estimate = 1.000000
[Fri Jan 27 00:37:28 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jan 27 00:37:28 2012] Assessing source extent using major
[Fri Jan 27 00:37:28 2012] Source does appear to be extended
[Fri Jan 27 00:37:28 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jan 27 00:37:42 2012] XMMSAS src. selection expression = ellipse(22363.576691, 35283.323608, 652.500000, 652.500000, 0.000000, X, Y)
[Fri Jan 27 00:37:42 2012] Writing source region out to fullrun_pn_xmm0102642301_pi300-10000_pass1_cl_src29_src.reg
[Fri Jan 27 00:37:42 2012] Extracting stamp from image fullrun_pn_xmm0102642301_pi300-10000_cl_sm2.00.img.gz, (220, 369) - (295, 444)
[Fri Jan 27 00:37:42 2012] XMMSAS bgd. selection expression = annulus(22363.576691, 35283.323608, 1087.500000, 2175.000000, X, Y) && !ellipse(23052.972000, 34830.659600, 1309.651238, 1309.651238, 0.000000, X, Y) && !ellipse(24883.403880, 39015.151200, 1910.408055, 297.074409, 115.288600, X, Y) && !ellipse(24603.043457, 38323.422424, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24289.529633, 37622.234497, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24133.258000, 37083.594000, 768.564822, 768.564822, 0.000000, X, Y) && !ellipse(23851.216156, 36638.572693, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24187.234600, 32681.062600, 474.680014, 474.680014, 0.000000, X, Y)
[Fri Jan 27 00:37:42 2012] Writing fullrun_pn_xmm0102642301_pi300-10000_pass1_cl_src29.gif
[Fri Jan 27 00:54:26 2012] Mean detx,y = (-8163.97, -5565.37) 
[Fri Jan 27 00:54:28 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Jan 27 00:54:45 2012] Binned source spectrum to 10 counts/bin
[Fri Jan 27 00:54:45 2012] Setting source spectrum file to fullrun_pn_xmm0102642301_pi300-10000_pass1_cl_src29_src_b10.pi.gz
[Fri Jan 27 00:54:45 2012] Setting bgd. spectrum file to fullrun_pn_xmm0102642301_pi300-10000_pass1_cl_src29_bgd.pi.gz
[Fri Jan 27 01:26:54 2012] Not generating rmf since there are only 60 counts
[Fri Jan 27 01:26:54 2012] rmf not generated due to insufficient counts
[Fri Jan 27 02:34:51 2012] Updating aperture counts using extracted products
[Fri Jan 27 02:34:51 2012] Error reading totcts from fullrun_pn_xmm0102642301_pi300-10000_pass1_cl_src29_src_b10.pi.gz
[Fri Jan 27 02:34:51 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jan 27 02:34:51 2012] Using photon index=1.80, rate=0.006, arf fullrun_pn_xmm0102642301_pi300-10000_pass1_cl_src29.arf
[Fri Jan 27 02:34:51 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jan 27 02:34:51 2012] Updating source flux to 3e-14
[Fri Jan 27 02:36:31 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting