[Thu Jan 26 18:57:30 2012] Detection parameters:
  Position = (283.4, 441.1) = 1 33 44.86 30 42 36.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 68.3 +/- 11.1
  Background counts = 12.1
  Rate = 0.007 +/- 0.001

[Thu Jan 26 18:57:31 2012] Off-axis axis estimate = 10.40'
[Thu Jan 26 18:59:11 2012] Using EEF radius (= 11.63 ")to estimate initial spatial extent for simple fitting
[Thu Jan 26 18:59:11 2012] Initial guess for spatial extent in simple fitting = 11.63"
[Thu Jan 26 18:59:11 2012] source mask rpix=2.7, npix_max = 40, mask sum = 30, frac = 0.745
[Thu Jan 26 18:59:11 2012] Giving source the simple spatial ID 21 for pass 0, mean size = 11.63"
[Thu Jan 26 20:52:33 2012] fullrun_pn_xmm0102642301_pi300-10000_cl_pass0_src21.ximg exists
[Thu Jan 26 20:52:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0102642301_pi300-10000_cl_pass0_src21.csv
[Thu Jan 26 20:52:33 2012] fullrun_pn_xmm0102642301_pi300-10000_cl_pass0_src21_1.ximg exists
[Thu Jan 26 20:52:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0102642301_pi300-10000_cl_pass0_src21.csv
[Thu Jan 26 20:52:33 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0102642301_pi300-10000_cl_pass0_src21_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0102642301_pi300-10000_cl_pass0_src21.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jan 26 20:52:33 2012] fullrun_pn_xmm0102642301_pi300-10000_cl_pass0_tfrozen_src21.ximg exists
[Thu Jan 26 20:52:33 2012] fullrun_pn_xmm0102642301_pi300-10000_cl_pass0_tfrozen_src21_1.ximg exists
[Thu Jan 26 20:52:33 2012] Fit fullrun_pn_xmm0102642301_pi300-10000_cl_pass0_tfrozen_src21 appears to have run properly
[Thu Jan 26 21:51:22 2012] Warning: source 21 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 22 at 15.100956 pixels away
[Thu Jan 26 21:51:22 2012] Source 22 is offset by 2.132477 and 2.803729 pixels which is larger than
2 X fitted extent = 1.282161 x 1.282161, not incorporating fit results
[Thu Jan 26 21:51:22 2012] Vigneting correction estimate = 1.000000
[Thu Jan 26 21:51:22 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jan 26 21:51:22 2012] Assessing source extent using major
[Thu Jan 26 21:51:22 2012] Source does appear to be extended
[Thu Jan 26 21:51:22 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jan 26 21:51:22 2012] Source is confused with source 21
[Thu Jan 26 21:51:36 2012] Using EEF radius (= 11.63 ")to estimate initial spatial extent for simple fitting
[Thu Jan 26 21:51:36 2012] Initial guess for spatial extent in simple fitting = 11.63"
[Thu Jan 26 21:51:36 2012] source mask rpix=2.7, npix_max = 40, mask sum = 30, frac = 0.745
[Thu Jan 26 21:51:36 2012] Giving source the simple spatial ID 21 for pass 1, mean size = 11.63"
[Thu Jan 26 23:28:41 2012] fullrun_pn_xmm0102642301_pi300-10000_cl_pass1_src21.ximg exists
[Thu Jan 26 23:28:41 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0102642301_pi300-10000_cl_pass1_src21.csv
[Thu Jan 26 23:28:41 2012] fullrun_pn_xmm0102642301_pi300-10000_cl_pass1_src21_1.ximg exists
[Thu Jan 26 23:28:41 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0102642301_pi300-10000_cl_pass1_src21.csv
[Thu Jan 26 23:28:41 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0102642301_pi300-10000_cl_pass1_src21_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0102642301_pi300-10000_cl_pass1_src21.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jan 26 23:28:42 2012] fullrun_pn_xmm0102642301_pi300-10000_cl_pass1_tfrozen_src21.ximg exists
[Thu Jan 26 23:28:42 2012] fullrun_pn_xmm0102642301_pi300-10000_cl_pass1_tfrozen_src21_1.ximg exists
[Thu Jan 26 23:28:42 2012] Fit fullrun_pn_xmm0102642301_pi300-10000_cl_pass1_tfrozen_src21 appears to have run properly
[Fri Jan 27 00:37:27 2012] Warning: source 12 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 22 at 12.308611 pixels away
[Fri Jan 27 00:37:27 2012] Warning: source 21 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 22 at 15.552264 pixels away
[Fri Jan 27 00:37:28 2012] Vigneting correction estimate = 1.000000
[Fri Jan 27 00:37:28 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jan 27 00:37:28 2012] Assessing source extent using major
[Fri Jan 27 00:37:28 2012] Source does appear to be extended
[Fri Jan 27 00:37:28 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jan 27 00:37:42 2012] XMMSAS src. selection expression = ellipse(24603.043457, 38323.422424, 652.500000, 652.500000, 0.000000, X, Y)
[Fri Jan 27 00:37:42 2012] Writing source region out to fullrun_pn_xmm0102642301_pi300-10000_pass1_cl_src22_src.reg
[Fri Jan 27 00:37:42 2012] Extracting stamp from image fullrun_pn_xmm0102642301_pi300-10000_cl_sm2.00.img.gz, (246, 404) - (321, 479)
[Fri Jan 27 00:37:42 2012] XMMSAS bgd. selection expression = annulus(24603.043457, 38323.422424, 1087.500000, 2175.000000, X, Y) && !ellipse(25414.526200, 40053.466000, 880.824025, 880.824025, 0.000000, X, Y) && !ellipse(25162.610000, 39505.898000, 577.434417, 577.434417, 0.000000, X, Y) && !ellipse(24883.403880, 39015.151200, 1910.408055, 297.074409, 115.288600, X, Y) && !ellipse(24289.529633, 37622.234497, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24133.258000, 37083.594000, 768.564822, 768.564822, 0.000000, X, Y) && !ellipse(23851.216156, 36638.572693, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22363.576691, 35283.323608, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Jan 27 00:37:42 2012] Writing fullrun_pn_xmm0102642301_pi300-10000_pass1_cl_src22.gif
[Fri Jan 27 00:52:07 2012] Mean detx,y = (-7238.34, -9348.82) 
[Fri Jan 27 00:52:10 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Jan 27 00:52:22 2012] Binned source spectrum to 10 counts/bin
[Fri Jan 27 00:52:23 2012] Setting source spectrum file to fullrun_pn_xmm0102642301_pi300-10000_pass1_cl_src22_src_b10.pi.gz
[Fri Jan 27 00:52:23 2012] Setting bgd. spectrum file to fullrun_pn_xmm0102642301_pi300-10000_pass1_cl_src22_bgd.pi.gz
[Fri Jan 27 01:26:09 2012] Not generating rmf since there are only 68 counts
[Fri Jan 27 01:26:09 2012] rmf not generated due to insufficient counts
[Fri Jan 27 02:34:51 2012] Updating aperture counts using extracted products
[Fri Jan 27 02:34:51 2012] Error reading totcts from fullrun_pn_xmm0102642301_pi300-10000_pass1_cl_src22_src_b10.pi.gz
[Fri Jan 27 02:34:51 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jan 27 02:34:51 2012] Using photon index=1.80, rate=0.00683, arf fullrun_pn_xmm0102642301_pi300-10000_pass1_cl_src22.arf
[Fri Jan 27 02:34:51 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jan 27 02:34:51 2012] Updating source flux to 6.5e-14
[Fri Jan 27 02:36:31 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting