[Thu Jan 26 18:57:30 2012] Detection parameters:
  Position = (253.6, 312.1) = 1 33 54.87 30 33 11.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 197.8 +/- 17.7
  Background counts = 13.6
  Rate = 0.03 +/- 0.003

[Thu Jan 26 18:57:31 2012] Off-axis axis estimate = 3.40'
[Thu Jan 26 18:59:11 2012] Using EEF radius (= 8.13 ")to estimate initial spatial extent for simple fitting
[Thu Jan 26 18:59:11 2012] Initial guess for spatial extent in simple fitting = 8.13"
[Thu Jan 26 18:59:11 2012] source mask rpix=1.9, npix_max = 22, mask sum = 25, frac = 1.114
[Thu Jan 26 18:59:11 2012] Giving source the simple spatial ID 15 for pass 0, mean size = 8.13"
[Thu Jan 26 20:52:33 2012] fullrun_pn_xmm0102642301_pi300-10000_cl_pass0_src15.ximg exists
[Thu Jan 26 20:52:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0102642301_pi300-10000_cl_pass0_src15.csv
[Thu Jan 26 20:52:33 2012] fullrun_pn_xmm0102642301_pi300-10000_cl_pass0_src15_1.ximg exists
[Thu Jan 26 20:52:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0102642301_pi300-10000_cl_pass0_src15.csv
[Thu Jan 26 20:52:33 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0102642301_pi300-10000_cl_pass0_src15_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0102642301_pi300-10000_cl_pass0_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jan 26 20:52:33 2012] fullrun_pn_xmm0102642301_pi300-10000_cl_pass0_tfrozen_src15.ximg exists
[Thu Jan 26 20:52:33 2012] fullrun_pn_xmm0102642301_pi300-10000_cl_pass0_tfrozen_src15_1.ximg exists
[Thu Jan 26 20:52:33 2012] Fit fullrun_pn_xmm0102642301_pi300-10000_cl_pass0_tfrozen_src15 appears to have run properly
[Thu Jan 26 21:51:22 2012] Warning: source 15 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 16 at 10.813778 pixels away
[Thu Jan 26 21:51:22 2012] Vigneting correction estimate = 1.000000
[Thu Jan 26 21:51:22 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jan 26 21:51:22 2012] Assessing source extent using major
[Thu Jan 26 21:51:22 2012] Source does appear to be extended
[Thu Jan 26 21:51:22 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jan 26 21:51:36 2012] Using EEF radius (= 8.13 ")to estimate initial spatial extent for simple fitting
[Thu Jan 26 21:51:36 2012] Initial guess for spatial extent in simple fitting = 8.13"
[Thu Jan 26 21:51:36 2012] source mask rpix=1.9, npix_max = 22, mask sum = 25, frac = 1.114
[Thu Jan 26 21:51:36 2012] Giving source the simple spatial ID 15 for pass 1, mean size = 8.13"
[Thu Jan 26 23:28:41 2012] fullrun_pn_xmm0102642301_pi300-10000_cl_pass1_src15.ximg exists
[Thu Jan 26 23:28:41 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0102642301_pi300-10000_cl_pass1_src15.csv
[Thu Jan 26 23:28:41 2012] fullrun_pn_xmm0102642301_pi300-10000_cl_pass1_src15_1.ximg exists
[Thu Jan 26 23:28:41 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0102642301_pi300-10000_cl_pass1_src15.csv
[Thu Jan 26 23:28:41 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0102642301_pi300-10000_cl_pass1_src15_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0102642301_pi300-10000_cl_pass1_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jan 26 23:28:42 2012] fullrun_pn_xmm0102642301_pi300-10000_cl_pass1_tfrozen_src15.ximg exists
[Thu Jan 26 23:28:42 2012] fullrun_pn_xmm0102642301_pi300-10000_cl_pass1_tfrozen_src15_1.ximg exists
[Thu Jan 26 23:28:42 2012] Fit fullrun_pn_xmm0102642301_pi300-10000_cl_pass1_tfrozen_src15 appears to have run properly
[Fri Jan 27 00:37:27 2012] Spatial fit model total counts = 314.000000, observed total counts = 314.000000
[Fri Jan 27 00:37:27 2012] Offset between fit and detection position for source 16 = 0.092085 pixels
[Fri Jan 27 00:37:27 2012] 311.333000 total counts/ 173.250000 bgd. counts: snr = 10.490679
Spatial fit parameters:
  Offset between fit and detection position for source 16 = 0.092085 pixels
  Position = (253.6, 312.2) = 1 33 54.86 30 33 10.5
  Extent = 5.1 (4.5-6.2)", rotation angle = 0
  Source counts = 138.1 +/- 17.6
  Background counts = 173.2
  Rate = 0.01 +/- 0.002
[Fri Jan 27 00:37:28 2012] Vigneting correction estimate = 1.000000
[Fri Jan 27 00:37:28 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jan 27 00:37:28 2012] Assessing source extent using major axis lower bound
[Fri Jan 27 00:37:28 2012] Source does appear to be extended
[Fri Jan 27 00:37:28 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jan 27 00:37:42 2012] XMMSAS src. selection expression = ellipse(22017.212200, 27114.429400, 308.385609, 308.385609, 0.000000, X, Y)
[Fri Jan 27 00:37:42 2012] Writing source region out to fullrun_pn_xmm0102642301_pi300-10000_pass1_cl_src16_src.reg
[Fri Jan 27 00:37:42 2012] Extracting stamp from image fullrun_pn_xmm0102642301_pi300-10000_cl_sm2.00.img.gz, (236, 294) - (271, 330)
[Fri Jan 27 00:37:42 2012] XMMSAS bgd. selection expression = annulus(22017.212200, 27114.429400, 513.976015, 1027.952030, X, Y)
[Fri Jan 27 00:37:42 2012] Writing fullrun_pn_xmm0102642301_pi300-10000_pass1_cl_src16.gif
[Fri Jan 27 00:48:24 2012] Mean detx,y = (-5106.85, 1965.05) 
[Fri Jan 27 00:48:26 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Jan 27 00:48:38 2012] Binned source spectrum to 10 counts/bin
[Fri Jan 27 00:48:38 2012] Setting source spectrum file to fullrun_pn_xmm0102642301_pi300-10000_pass1_cl_src16_src_b10.pi.gz
[Fri Jan 27 00:48:38 2012] Setting bgd. spectrum file to fullrun_pn_xmm0102642301_pi300-10000_pass1_cl_src16_bgd.pi.gz
[Fri Jan 27 02:34:51 2012] Updating aperture counts using extracted products
[Fri Jan 27 02:34:51 2012] Error reading totcts from fullrun_pn_xmm0102642301_pi300-10000_pass1_cl_src16_src_b10.pi.gz
[Fri Jan 27 02:34:51 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jan 27 02:34:51 2012] Using photon index=1.80, rate=0.0138, arf fullrun_pn_xmm0102642301_pi300-10000_pass1_cl_src16.arf
[Fri Jan 27 02:34:51 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jan 27 02:34:51 2012] Updating source flux to 5.9e-14