[Thu Jan 26 18:57:30 2012] Detection parameters:
  Position = (331.2, 232.5) = 1 33 28.74 30 27 24.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 5392.6 +/- 83.7
  Background counts = 12.8
  Rate = 0.8 +/- 0.01

[Thu Jan 26 18:57:31 2012] Off-axis axis estimate = 5.34'
[Thu Jan 26 18:59:11 2012] Using EEF radius (= 9.10 ")to estimate initial spatial extent for simple fitting
[Thu Jan 26 18:59:11 2012] Initial guess for spatial extent in simple fitting = 9.10"
[Thu Jan 26 18:59:11 2012] source mask rpix=2.1, npix_max = 26, mask sum = 21, frac = 0.782
[Thu Jan 26 18:59:11 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 9.10"
[Thu Jan 26 20:52:32 2012] fullrun_pn_xmm0102642301_pi300-10000_cl_pass0_src1.ximg exists
[Thu Jan 26 20:52:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0102642301_pi300-10000_cl_pass0_src1.csv
[Thu Jan 26 20:52:32 2012] fullrun_pn_xmm0102642301_pi300-10000_cl_pass0_src1_1.ximg exists
[Thu Jan 26 20:52:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0102642301_pi300-10000_cl_pass0_src1.csv
[Thu Jan 26 20:52:32 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0102642301_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0102642301_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jan 26 20:52:33 2012] fullrun_pn_xmm0102642301_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Thu Jan 26 20:52:33 2012] fullrun_pn_xmm0102642301_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Thu Jan 26 20:52:33 2012] Fit fullrun_pn_xmm0102642301_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Thu Jan 26 21:51:22 2012] Spatial fit model total counts = 5022.070000, observed total counts = 5040.000000
[Thu Jan 26 21:51:22 2012] Offset between fit and detection position for source 1 = 0.132645 pixels
[Thu Jan 26 21:51:22 2012] 5051.163000 total counts/ 843.863000 bgd. counts: snr = 144.832994
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.132645 pixels
  Position = (331.4, 232.6) = 1 33 28.70 30 27 24.0
  Extent = 5.4 (5.3-5.5)", rotation angle = 0
  Source counts = 4207.3 +/- 71.1
  Background counts = 843.9
  Rate = 0.4 +/- 0.007
[Thu Jan 26 21:51:22 2012] Vigneting correction estimate = 1.000000
[Thu Jan 26 21:51:22 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jan 26 21:51:22 2012] Assessing source extent using major axis lower bound
[Thu Jan 26 21:51:22 2012] Source does appear to be extended
[Thu Jan 26 21:51:22 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jan 26 21:51:36 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Jan 26 21:51:36 2012] Initial guess for spatial extent in simple fitting = 5.38"
[Thu Jan 26 21:51:36 2012] source mask rpix=1.2, npix_max = 12, mask sum = 9, frac = 0.745
[Thu Jan 26 21:51:36 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 5.38"
[Thu Jan 26 23:28:41 2012] fullrun_pn_xmm0102642301_pi300-10000_cl_pass1_src1.ximg exists
[Thu Jan 26 23:28:41 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0102642301_pi300-10000_cl_pass1_src1.csv
[Thu Jan 26 23:28:41 2012] fullrun_pn_xmm0102642301_pi300-10000_cl_pass1_src1_1.ximg exists
[Thu Jan 26 23:28:41 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0102642301_pi300-10000_cl_pass1_src1.csv
[Thu Jan 26 23:28:41 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0102642301_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0102642301_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jan 26 23:28:41 2012] fullrun_pn_xmm0102642301_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Thu Jan 26 23:28:41 2012] fullrun_pn_xmm0102642301_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Thu Jan 26 23:28:41 2012] Fit fullrun_pn_xmm0102642301_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Fri Jan 27 00:37:27 2012] Spatial fit model total counts = 5006.800000, observed total counts = 4999.000000
[Fri Jan 27 00:37:27 2012] Offset between fit and detection position for source 1 = 0.005514 pixels
[Fri Jan 27 00:37:27 2012] 5041.368000 total counts/ 829.168000 bgd. counts: snr = 146.280932
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.005514 pixels
  Position = (331.4, 232.6) = 1 33 28.70 30 27 24.0
  Extent = 5.4 (5.3-5.5)", rotation angle = 0
  Source counts = 4212.2 +/- 71.0
  Background counts = 829.2
  Rate = 0.4 +/- 0.007
[Fri Jan 27 00:37:28 2012] Vigneting correction estimate = 1.000000
[Fri Jan 27 00:37:28 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jan 27 00:37:28 2012] Assessing source extent using major axis lower bound
[Fri Jan 27 00:37:28 2012] Source does appear to be extended
[Fri Jan 27 00:37:28 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jan 27 00:37:41 2012] Counts = 4212.200000, rescaling region sizes by 2.000000
[Fri Jan 27 00:37:41 2012] XMMSAS src. selection expression = ellipse(28779.092000, 20184.479200, 644.133619, 644.133619, 0.000000, X, Y)
[Fri Jan 27 00:37:41 2012] Writing source region out to fullrun_pn_xmm0102642301_pi300-10000_pass1_cl_src1_src.reg
[Fri Jan 27 00:37:41 2012] Extracting stamp from image fullrun_pn_xmm0102642301_pi300-10000_cl_sm2.00.img.gz, (294, 196) - (368, 270)
[Fri Jan 27 00:37:41 2012] XMMSAS bgd. selection expression = annulus(28779.092000, 20184.479200, 2147.112062, 4294.224124, X, Y) && !ellipse(29884.618896, 17375.374023, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Jan 27 00:37:41 2012] Writing fullrun_pn_xmm0102642301_pi300-10000_pass1_cl_src1.gif
[Fri Jan 27 00:37:49 2012] Mean detx,y = (3900.06, 5543.62) 
[Fri Jan 27 00:37:51 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Jan 27 00:38:19 2012] Binned source spectrum to 10 counts/bin
[Fri Jan 27 00:38:19 2012] Setting source spectrum file to fullrun_pn_xmm0102642301_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Fri Jan 27 00:38:19 2012] Setting bgd. spectrum file to fullrun_pn_xmm0102642301_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Fri Jan 27 02:34:50 2012] Updating aperture counts using extracted products
[Fri Jan 27 02:34:50 2012] Error reading totcts from fullrun_pn_xmm0102642301_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Fri Jan 27 02:34:51 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jan 27 02:34:51 2012] Using photon index=1.80, rate=0.421, arf fullrun_pn_xmm0102642301_pi300-10000_pass1_cl_src1.arf
[Fri Jan 27 02:34:51 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jan 27 02:34:51 2012] Updating source flux to 1.5e-12
[Fri Jan 27 02:38:02 2012] Reading fit data from xmm0102642301/analysis//spectral/fullrun_pn_xmm0102642301_pi300-10000_pass1_cl_src1_pl.csv
[Fri Jan 27 02:38:02 2012] Spectral fit parameter nH value = 9.87003e+20
[Fri Jan 27 02:38:02 2012] Spectral fit parameter PhoIndex value = 1.62776
[Fri Jan 27 02:38:02 2012] Failed to get F(0.3-8.0) from xmm0102642301/analysis//spectral/fullrun_pn_xmm0102642301_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Fri Jan 27 02:38:02 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jan 27 02:38:02 2012] Using Nh = 9.9e+20, photon index=1.63, rate=0.421, arf fullrun_pn_xmm0102642301_pi300-10000_pass1_cl_src1.arf
[Fri Jan 27 02:38:02 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jan 27 02:38:02 2012] Updating source flux to 2e-12