[Thu Jan 26 18:58:11 2012] Detection parameters:
  Position = (344.1, 462.0) = 1 33 24.36 30 44 3.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 395.3 +/- 24.1
  Background counts = 3.7
  Rate = 0.03 +/- 0.002

[Thu Jan 26 18:58:11 2012] Off-axis axis estimate = 12.31'
[Thu Jan 26 21:26:52 2012] Using EEF radius (= 12.58 ")to estimate initial spatial extent for simple fitting
[Thu Jan 26 21:26:52 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Jan 26 21:26:52 2012] Initial guess for spatial extent in simple fitting = 12.58"
[Thu Jan 26 21:26:52 2012] source mask rpix=2.9, npix_max = 46, mask sum = 42, frac = 0.912
[Thu Jan 26 21:26:52 2012] Giving source the simple spatial ID 5 for pass 0, mean size = 12.58"
[Thu Jan 26 21:51:12 2012] fullrun_mos2_xmm0102642301_pi300-10000_cl_pass0_src5.ximg exists
[Thu Jan 26 21:51:12 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0102642301_pi300-10000_cl_pass0_src5.csv
[Thu Jan 26 21:51:12 2012] fullrun_mos2_xmm0102642301_pi300-10000_cl_pass0_src5_1.ximg exists
[Thu Jan 26 21:51:12 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0102642301_pi300-10000_cl_pass0_src5.csv
[Thu Jan 26 21:51:12 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0102642301_pi300-10000_cl_pass0_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0102642301_pi300-10000_cl_pass0_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jan 26 21:51:12 2012] fullrun_mos2_xmm0102642301_pi300-10000_cl_pass0_tfrozen_src5.ximg exists
[Thu Jan 26 21:51:12 2012] fullrun_mos2_xmm0102642301_pi300-10000_cl_pass0_tfrozen_src5_1.ximg exists
[Thu Jan 26 21:51:12 2012] Fit fullrun_mos2_xmm0102642301_pi300-10000_cl_pass0_tfrozen_src5 appears to have run properly
[Thu Jan 26 21:51:27 2012] Spatial fit model total counts = 391.000000, observed total counts = 391.000000
[Thu Jan 26 21:51:27 2012] Offset between fit and detection position for source 4 = 0.321545 pixels
[Thu Jan 26 21:51:27 2012] 393.771000 total counts/ 102.637000 bgd. counts: snr = 28.736969
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 0.321545 pixels
  Position = (343.8, 462.0) = 1 33 24.47 30 44 1.9
  Extent = 6.6 (5.7-7.3)", rotation angle = 0
  Source counts = 291.1 +/- 19.8
  Background counts = 102.6
  Rate = 0.02 +/- 0.002
[Thu Jan 26 21:51:27 2012] Vigneting correction estimate = 1.000000
[Thu Jan 26 21:51:27 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jan 26 21:51:27 2012] Assessing source extent using major axis lower bound
[Thu Jan 26 21:51:27 2012] Source does appear to be extended
[Thu Jan 26 21:51:27 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jan 26 23:48:27 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Jan 26 23:48:27 2012] Initial guess for spatial extent in simple fitting = 6.57"
[Thu Jan 26 23:48:27 2012] source mask rpix=1.5, npix_max = 16, mask sum = 16, frac = 0.990
[Thu Jan 26 23:48:27 2012] Giving source the simple spatial ID 5 for pass 1, mean size = 6.57"
[Fri Jan 27 00:37:18 2012] fullrun_mos2_xmm0102642301_pi300-10000_cl_pass1_src5.ximg exists
[Fri Jan 27 00:37:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0102642301_pi300-10000_cl_pass1_src5.csv
[Fri Jan 27 00:37:18 2012] fullrun_mos2_xmm0102642301_pi300-10000_cl_pass1_src5_1.ximg exists
[Fri Jan 27 00:37:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0102642301_pi300-10000_cl_pass1_src5.csv
[Fri Jan 27 00:37:18 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0102642301_pi300-10000_cl_pass1_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0102642301_pi300-10000_cl_pass1_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jan 27 00:37:18 2012] fullrun_mos2_xmm0102642301_pi300-10000_cl_pass1_tfrozen_src5.ximg exists
[Fri Jan 27 00:37:18 2012] fullrun_mos2_xmm0102642301_pi300-10000_cl_pass1_tfrozen_src5_1.ximg exists
[Fri Jan 27 00:37:18 2012] Fit fullrun_mos2_xmm0102642301_pi300-10000_cl_pass1_tfrozen_src5 appears to have run properly
[Fri Jan 27 00:37:33 2012] Spatial fit model total counts = 386.998000, observed total counts = 387.000000
[Fri Jan 27 00:37:33 2012] Offset between fit and detection position for source 4 = 0.022668 pixels
[Fri Jan 27 00:37:33 2012] 385.981000 total counts/ 101.766000 bgd. counts: snr = 28.173814
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 0.022668 pixels
  Position = (343.8, 462.0) = 1 33 24.46 30 44 1.9
  Extent = 6.4 (5.5-7.1)", rotation angle = 0
  Source counts = 284.2 +/- 19.6
  Background counts = 101.8
  Rate = 0.02 +/- 0.002
[Fri Jan 27 00:37:33 2012] Vigneting correction estimate = 1.000000
[Fri Jan 27 00:37:33 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jan 27 00:37:33 2012] Assessing source extent using major axis lower bound
[Fri Jan 27 00:37:33 2012] Source does appear to be extended
[Fri Jan 27 00:37:33 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jan 27 01:58:16 2012] XMMSAS src. selection expression = ellipse(29863.559900, 40142.916600, 382.748411, 382.748411, 0.000000, X, Y)
[Fri Jan 27 01:58:16 2012] Writing source region out to fullrun_mos2_xmm0102642301_pi300-10000_pass1_cl_src4_src.reg
[Fri Jan 27 01:58:16 2012] Extracting stamp from image fullrun_mos2_xmm0102642301_pi300-10000_cl_sm2.00.img.gz, (322, 440) - (366, 484)
[Fri Jan 27 01:58:16 2012] XMMSAS bgd. selection expression = annulus(29863.559900, 40142.916600, 637.914018, 1275.828037, X, Y)
[Fri Jan 27 01:58:16 2012] Writing fullrun_mos2_xmm0102642301_pi300-10000_pass1_cl_src4.gif
[Fri Jan 27 02:07:23 2012] Mean detx,y = (3481.66, 12957.92) 
[Fri Jan 27 02:07:24 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Jan 27 02:07:28 2012] Binned source spectrum to 10 counts/bin
[Fri Jan 27 02:07:28 2012] Setting source spectrum file to fullrun_mos2_xmm0102642301_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Fri Jan 27 02:07:28 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0102642301_pi300-10000_pass1_cl_src4_bgd.pi.gz
[Fri Jan 27 02:34:52 2012] Updating aperture counts using extracted products
[Fri Jan 27 02:34:52 2012] Error reading totcts from fullrun_mos2_xmm0102642301_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Fri Jan 27 02:34:52 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jan 27 02:34:52 2012] Using photon index=1.80, rate=0.0232, arf fullrun_mos2_xmm0102642301_pi300-10000_pass1_cl_src4.arf
[Fri Jan 27 02:34:52 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jan 27 02:34:52 2012] Updating source flux to 7.6e-13