[Thu Jan 26 18:58:11 2012] Detection parameters:
  Position = (265.4, 400.8) = 1 33 50.92 30 39 36.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 11890.7 +/- 131.9
  Background counts = 5.6
  Rate = 1 +/- 0.01

[Thu Jan 26 18:58:11 2012] Off-axis axis estimate = 7.80'
[Thu Jan 26 21:26:52 2012] Using EEF radius (= 10.33 ")to estimate initial spatial extent for simple fitting
[Thu Jan 26 21:26:52 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Jan 26 21:26:52 2012] Initial guess for spatial extent in simple fitting = 10.33"
[Thu Jan 26 21:26:52 2012] source mask rpix=2.4, npix_max = 33, mask sum = 35, frac = 1.059
[Thu Jan 26 21:26:52 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 10.33"
[Thu Jan 26 21:51:12 2012] fullrun_mos2_xmm0102642301_pi300-10000_cl_pass0_src1.ximg exists
[Thu Jan 26 21:51:12 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0102642301_pi300-10000_cl_pass0_src1.csv
[Thu Jan 26 21:51:12 2012] fullrun_mos2_xmm0102642301_pi300-10000_cl_pass0_src1_1.ximg exists
[Thu Jan 26 21:51:12 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0102642301_pi300-10000_cl_pass0_src1.csv
[Thu Jan 26 21:51:12 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0102642301_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0102642301_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jan 26 21:51:12 2012] fullrun_mos2_xmm0102642301_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Thu Jan 26 21:51:12 2012] fullrun_mos2_xmm0102642301_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Thu Jan 26 21:51:12 2012] Fit fullrun_mos2_xmm0102642301_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Thu Jan 26 21:51:27 2012] Warning, spatial fit 1 centroid is now closest to src. 6
[Thu Jan 26 21:51:27 2012] Vigneting correction estimate = 1.000000
[Thu Jan 26 21:51:27 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jan 26 21:51:27 2012] Assessing source extent using major
[Thu Jan 26 21:51:27 2012] Source does appear to be extended
[Thu Jan 26 21:51:27 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jan 26 21:51:27 2012] Source is confused with source 6
[Thu Jan 26 23:48:27 2012] Using EEF radius (= 10.33 ")to estimate initial spatial extent for simple fitting
[Thu Jan 26 23:48:27 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Jan 26 23:48:27 2012] Initial guess for spatial extent in simple fitting = 10.33"
[Thu Jan 26 23:48:27 2012] source mask rpix=2.4, npix_max = 33, mask sum = 35, frac = 1.059
[Thu Jan 26 23:48:27 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 10.33"
[Fri Jan 27 00:37:18 2012] fullrun_mos2_xmm0102642301_pi300-10000_cl_pass1_src1.ximg exists
[Fri Jan 27 00:37:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0102642301_pi300-10000_cl_pass1_src1.csv
[Fri Jan 27 00:37:18 2012] fullrun_mos2_xmm0102642301_pi300-10000_cl_pass1_src1_1.ximg exists
[Fri Jan 27 00:37:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0102642301_pi300-10000_cl_pass1_src1.csv
[Fri Jan 27 00:37:18 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0102642301_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0102642301_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jan 27 00:37:18 2012] fullrun_mos2_xmm0102642301_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Fri Jan 27 00:37:18 2012] fullrun_mos2_xmm0102642301_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Fri Jan 27 00:37:18 2012] Fit fullrun_mos2_xmm0102642301_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Fri Jan 27 00:37:33 2012] Warning, spatial fit 1 centroid is now closest to src. 6
[Fri Jan 27 00:37:33 2012] Spatial fit model total counts = 11812.800000, observed total counts = 11798.000000
[Fri Jan 27 00:37:33 2012] Offset between fit and detection position for source 3 = 0.354204 pixels
[Fri Jan 27 00:37:33 2012] Warning, changing simple spatial fit ID from 1 to 18
[Fri Jan 27 00:37:33 2012] 11803.000000 total counts/ 1682.300000 bgd. counts: snr = 246.750948
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.354204 pixels
  Position = (265.1, 400.6) = 1 33 51.02 30 39 34.9
  Extent = 7.5 (7.4-7.7)", rotation angle = 0
  Source counts = 10120.7 +/- 108.6
  Background counts = 1682.3
  Rate = 0.8 +/- 0.009
[Fri Jan 27 00:37:33 2012] Vigneting correction estimate = 1.000000
[Fri Jan 27 00:37:33 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jan 27 00:37:33 2012] Assessing source extent using major axis lower bound
[Fri Jan 27 00:37:33 2012] Source does appear to be extended
[Fri Jan 27 00:37:33 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jan 27 01:58:16 2012] Counts = 10120.700000, rescaling region sizes by 3.000000
[Fri Jan 27 01:58:16 2012] XMMSAS src. selection expression = ellipse(23011.950000, 34803.094000, 1358.980239, 1358.980239, 0.000000, X, Y)
[Fri Jan 27 01:58:16 2012] Writing source region out to fullrun_mos2_xmm0102642301_pi300-10000_pass1_cl_src3_src.reg
[Fri Jan 27 01:58:16 2012] Extracting stamp from image fullrun_mos2_xmm0102642301_pi300-10000_cl_sm2.00.img.gz, (187, 322) - (343, 479)
[Fri Jan 27 01:58:16 2012] XMMSAS bgd. selection expression = annulus(23011.950000, 34803.094000, 6794.901196, 13589.802391, X, Y) && !ellipse(27373.492188, 25907.156677, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33122.490845, 33773.835907, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29863.559900, 40142.916600, 510.331215, 510.331215, 0.000000, X, Y) && !ellipse(28096.088600, 27566.931200, 355.851210, 355.851210, 0.000000, X, Y) && !ellipse(22032.478680, 27122.319800, 296.714409, 296.714409, 0.000000, X, Y) && !ellipse(20142.470600, 23378.758800, 393.676011, 393.676011, 0.000000, X, Y) && !ellipse(21468.401400, 32262.202400, 417.899212, 417.899212, 0.000000, X, Y) && !ellipse(35775.191000, 25627.910400, 526.161615, 526.161615, 0.000000, X, Y) && !ellipse(35817.318800, 36190.849800, 514.172815, 514.172815, 0.000000, X, Y) && !ellipse(20362.921400, 25208.790400, 440.635213, 440.635213, 0.000000, X, Y) && !ellipse(22308.368000, 34507.774600, 1671.352048, 1671.352048, 0.000000, X, Y)
[Fri Jan 27 01:58:16 2012] Writing fullrun_mos2_xmm0102642301_pi300-10000_pass1_cl_src3.gif
[Fri Jan 27 01:58:19 2012] Mean detx,y = (7511.13, 5254.44) 
[Fri Jan 27 01:58:20 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Jan 27 02:03:01 2012] Binned source spectrum to 10 counts/bin
[Fri Jan 27 02:03:01 2012] Setting source spectrum file to fullrun_mos2_xmm0102642301_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Fri Jan 27 02:03:01 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0102642301_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Fri Jan 27 02:34:52 2012] Updating aperture counts using extracted products
[Fri Jan 27 02:34:52 2012] Error reading totcts from fullrun_mos2_xmm0102642301_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Fri Jan 27 02:34:52 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jan 27 02:34:52 2012] Using photon index=1.80, rate=0.825, arf fullrun_mos2_xmm0102642301_pi300-10000_pass1_cl_src3.arf
[Fri Jan 27 02:34:52 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jan 27 02:34:52 2012] Updating source flux to 1.4e-11
[Fri Jan 27 02:35:35 2012] Flag c found in src. 3 procflags, skipping spectral fitting
[Fri Jan 27 02:36:31 2012] Reading fit data from xmm0102642301/analysis//spectral/fullrun_mos2_xmm0102642301_pi300-10000_pass1_cl_src3_pl.csv
[Fri Jan 27 02:36:31 2012] Spectral fit parameter nH value = 2.66097e+21
[Fri Jan 27 02:36:31 2012] Spectral fit parameter PhoIndex value = 2.3087
[Fri Jan 27 02:36:31 2012] Failed to get F(0.3-8.0) from xmm0102642301/analysis//spectral/fullrun_mos2_xmm0102642301_pi300-10000_pass1_cl_src3_pl.csv, possibly due to different flux energy range selected
[Fri Jan 27 02:36:31 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jan 27 02:36:31 2012] Using Nh = 2.7e+21, photon index=2.31, rate=0.825, arf fullrun_mos2_xmm0102642301_pi300-10000_pass1_cl_src3.arf
[Fri Jan 27 02:36:31 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jan 27 02:36:31 2012] Updating source flux to 1.4e-11