[Thu Jan 26 18:57:51 2012] Detection parameters:
  Position = (344.3, 462.1) = 1 33 24.29 30 44 3.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 449.5 +/- 25.1
  Background counts = 3.8
  Rate = 0.04 +/- 0.002

[Thu Jan 26 18:57:51 2012] Off-axis axis estimate = 12.32'
[Thu Jan 26 20:52:34 2012] Using EEF radius (= 12.59 ")to estimate initial spatial extent for simple fitting
[Thu Jan 26 20:52:34 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Jan 26 20:52:34 2012] Initial guess for spatial extent in simple fitting = 12.59"
[Thu Jan 26 20:52:34 2012] source mask rpix=2.9, npix_max = 46, mask sum = 41, frac = 0.890
[Thu Jan 26 20:52:34 2012] Giving source the simple spatial ID 4 for pass 0, mean size = 12.59"
[Thu Jan 26 21:26:52 2012] fullrun_mos1_xmm0102642301_pi300-10000_cl_pass0_src4.ximg exists
[Thu Jan 26 21:26:52 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0102642301_pi300-10000_cl_pass0_src4.csv
[Thu Jan 26 21:26:52 2012] fullrun_mos1_xmm0102642301_pi300-10000_cl_pass0_src4_1.ximg exists
[Thu Jan 26 21:26:52 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0102642301_pi300-10000_cl_pass0_src4.csv
[Thu Jan 26 21:26:52 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0102642301_pi300-10000_cl_pass0_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0102642301_pi300-10000_cl_pass0_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jan 26 21:26:52 2012] fullrun_mos1_xmm0102642301_pi300-10000_cl_pass0_tfrozen_src4.ximg exists
[Thu Jan 26 21:26:52 2012] fullrun_mos1_xmm0102642301_pi300-10000_cl_pass0_tfrozen_src4_1.ximg exists
[Thu Jan 26 21:26:52 2012] Fit fullrun_mos1_xmm0102642301_pi300-10000_cl_pass0_tfrozen_src4 appears to have run properly
[Thu Jan 26 21:51:24 2012] Warning: source 4 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 4 at 15.480683 pixels away
[Thu Jan 26 21:51:24 2012] Vigneting correction estimate = 1.000000
[Thu Jan 26 21:51:24 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jan 26 21:51:24 2012] Assessing source extent using major
[Thu Jan 26 21:51:24 2012] Source does appear to be extended
[Thu Jan 26 21:51:24 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jan 26 23:28:42 2012] Using EEF radius (= 12.59 ")to estimate initial spatial extent for simple fitting
[Thu Jan 26 23:28:42 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Jan 26 23:28:42 2012] Initial guess for spatial extent in simple fitting = 12.59"
[Thu Jan 26 23:28:42 2012] source mask rpix=2.9, npix_max = 46, mask sum = 41, frac = 0.890
[Thu Jan 26 23:28:42 2012] Giving source the simple spatial ID 4 for pass 1, mean size = 12.59"
[Thu Jan 26 23:48:26 2012] fullrun_mos1_xmm0102642301_pi300-10000_cl_pass1_src4.ximg exists
[Thu Jan 26 23:48:26 2012] fullrun_mos1_xmm0102642301_pi300-10000_cl_pass1_src4_1.ximg exists
[Thu Jan 26 23:48:26 2012] Fit fullrun_mos1_xmm0102642301_pi300-10000_cl_pass1_src4 appears to have run properly
[Thu Jan 26 23:48:27 2012] fullrun_mos1_xmm0102642301_pi300-10000_cl_pass1_tfrozen_src4.ximg exists
[Thu Jan 26 23:48:27 2012] fullrun_mos1_xmm0102642301_pi300-10000_cl_pass1_tfrozen_src4_1.ximg exists
[Thu Jan 26 23:48:27 2012] Fit fullrun_mos1_xmm0102642301_pi300-10000_cl_pass1_tfrozen_src4 appears to have run properly
[Fri Jan 27 00:37:30 2012] Warning: source 4 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 4 at 16.134653 pixels away
[Fri Jan 27 00:37:30 2012] Vigneting correction estimate = 1.000000
[Fri Jan 27 00:37:30 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jan 27 00:37:30 2012] Assessing source extent using major
[Fri Jan 27 00:37:30 2012] Source does appear to be extended
[Fri Jan 27 00:37:30 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jan 27 01:30:23 2012] XMMSAS src. selection expression = ellipse(29906.878662, 40150.151611, 652.500000, 652.500000, 0.000000, X, Y)
[Fri Jan 27 01:30:23 2012] Writing source region out to fullrun_mos1_xmm0102642301_pi300-10000_pass1_cl_src4_src.reg
[Fri Jan 27 01:30:23 2012] Extracting stamp from image fullrun_mos1_xmm0102642301_pi300-10000_cl_sm2.00.img.gz, (307, 425) - (382, 500)
[Fri Jan 27 01:30:23 2012] XMMSAS bgd. selection expression = annulus(29906.878662, 40150.151611, 1087.500000, 2175.000000, X, Y)
[Fri Jan 27 01:30:23 2012] Writing fullrun_mos1_xmm0102642301_pi300-10000_pass1_cl_src4.gif
[Fri Jan 27 01:36:26 2012] Mean detx,y = (13198.56, -3587.63) 
[Fri Jan 27 01:36:27 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Jan 27 01:36:35 2012] Binned source spectrum to 10 counts/bin
[Fri Jan 27 01:36:35 2012] Setting source spectrum file to fullrun_mos1_xmm0102642301_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Fri Jan 27 01:36:35 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0102642301_pi300-10000_pass1_cl_src4_bgd.pi.gz
[Fri Jan 27 01:48:09 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Fri Jan 27 01:48:09 2012] rmf not generated due to insufficient counts
[Fri Jan 27 02:34:51 2012] Updating aperture counts using extracted products
[Fri Jan 27 02:34:51 2012] Error reading totcts from fullrun_mos1_xmm0102642301_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Fri Jan 27 02:34:51 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jan 27 02:34:51 2012] Using photon index=1.80, rate=0.0366, arf fullrun_mos1_xmm0102642301_pi300-10000_pass1_cl_src4.arf
[Fri Jan 27 02:34:51 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jan 27 02:34:51 2012] Updating source flux to 8.4e-13
[Fri Jan 27 02:34:53 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting