[Thu Jan 26 18:57:51 2012] Detection parameters:
  Position = (315.2, 298.8) = 1 33 34.12 30 32 11.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1639.7 +/- 48.2
  Background counts = 4.9
  Rate = 0.1 +/- 0.004

[Thu Jan 26 18:57:51 2012] Off-axis axis estimate = 1.22'
[Thu Jan 26 20:52:34 2012] Using EEF radius (= 7.04 ")to estimate initial spatial extent for simple fitting
[Thu Jan 26 20:52:34 2012] Initial guess for spatial extent in simple fitting = 7.04"
[Thu Jan 26 20:52:34 2012] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.892
[Thu Jan 26 20:52:34 2012] Giving source the simple spatial ID 3 for pass 0, mean size = 7.04"
[Thu Jan 26 21:26:52 2012] fullrun_mos1_xmm0102642301_pi300-10000_cl_pass0_src3.ximg exists
[Thu Jan 26 21:26:52 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0102642301_pi300-10000_cl_pass0_src3.csv
[Thu Jan 26 21:26:52 2012] fullrun_mos1_xmm0102642301_pi300-10000_cl_pass0_src3_1.ximg exists
[Thu Jan 26 21:26:52 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0102642301_pi300-10000_cl_pass0_src3.csv
[Thu Jan 26 21:26:52 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0102642301_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0102642301_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jan 26 21:26:52 2012] fullrun_mos1_xmm0102642301_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Thu Jan 26 21:26:52 2012] fullrun_mos1_xmm0102642301_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Thu Jan 26 21:26:52 2012] Fit fullrun_mos1_xmm0102642301_pi300-10000_cl_pass0_tfrozen_src3 appears to have run properly
[Thu Jan 26 21:51:24 2012] Source 1 is offset by 6.687815 and -6.681925 pixels which is larger than
2 X fitted extent = 0.808851 x 0.808851, not incorporating fit results
[Thu Jan 26 21:51:24 2012] Vigneting correction estimate = 1.000000
[Thu Jan 26 21:51:24 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jan 26 21:51:24 2012] Assessing source extent using major
[Thu Jan 26 21:51:24 2012] Source does appear to be extended
[Thu Jan 26 21:51:24 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jan 26 23:28:42 2012] Using EEF radius (= 7.04 ")to estimate initial spatial extent for simple fitting
[Thu Jan 26 23:28:42 2012] Initial guess for spatial extent in simple fitting = 7.04"
[Thu Jan 26 23:28:42 2012] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.892
[Thu Jan 26 23:28:42 2012] Giving source the simple spatial ID 3 for pass 1, mean size = 7.04"
[Thu Jan 26 23:48:26 2012] fullrun_mos1_xmm0102642301_pi300-10000_cl_pass1_src3.ximg exists
[Thu Jan 26 23:48:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0102642301_pi300-10000_cl_pass1_src3.csv
[Thu Jan 26 23:48:26 2012] fullrun_mos1_xmm0102642301_pi300-10000_cl_pass1_src3_1.ximg exists
[Thu Jan 26 23:48:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0102642301_pi300-10000_cl_pass1_src3.csv
[Thu Jan 26 23:48:26 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0102642301_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0102642301_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jan 26 23:48:27 2012] fullrun_mos1_xmm0102642301_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Thu Jan 26 23:48:27 2012] fullrun_mos1_xmm0102642301_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Thu Jan 26 23:48:27 2012] Fit fullrun_mos1_xmm0102642301_pi300-10000_cl_pass1_tfrozen_src3 appears to have run properly
[Fri Jan 27 00:37:30 2012] Spatial fit model total counts = 1418.000000, observed total counts = 1418.000000
[Fri Jan 27 00:37:30 2012] Offset between fit and detection position for source 1 = 0.157799 pixels
[Fri Jan 27 00:37:30 2012] 1422.949000 total counts/ 275.469000 bgd. counts: snr = 69.136718
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.157799 pixels
  Position = (315.2, 298.6) = 1 33 34.12 30 32 11.4
  Extent = 5.5 (5.2-5.7)", rotation angle = 0
  Source counts = 1147.5 +/- 37.7
  Background counts = 275.5
  Rate = 0.09 +/- 0.003
[Fri Jan 27 00:37:30 2012] Vigneting correction estimate = 1.000000
[Fri Jan 27 00:37:30 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jan 27 00:37:30 2012] Assessing source extent using major axis lower bound
[Fri Jan 27 00:37:30 2012] Source does appear to be extended
[Fri Jan 27 00:37:30 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jan 27 01:30:23 2012] Counts = 1147.480000, rescaling region sizes by 2.000000
[Fri Jan 27 01:30:23 2012] XMMSAS src. selection expression = ellipse(27374.801460, 25932.416200, 657.823219, 657.823219, 0.000000, X, Y)
[Fri Jan 27 01:30:23 2012] Writing source region out to fullrun_mos1_xmm0102642301_pi300-10000_pass1_cl_src1_src.reg
[Fri Jan 27 01:30:23 2012] Extracting stamp from image fullrun_mos1_xmm0102642301_pi300-10000_cl_sm2.00.img.gz, (277, 261) - (353, 336)
[Fri Jan 27 01:30:23 2012] XMMSAS bgd. selection expression = annulus(27374.801460, 25932.416200, 2192.744063, 4385.488126, X, Y) && !ellipse(28135.991240, 27594.802400, 301.190409, 301.190409, 0.000000, X, Y) && !ellipse(26916.681122, 30999.080719, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Jan 27 01:30:23 2012] Writing fullrun_mos1_xmm0102642301_pi300-10000_pass1_cl_src1.gif
[Fri Jan 27 01:36:09 2012] Mean detx,y = (-792.98, -47.19) 
[Fri Jan 27 01:36:10 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Jan 27 01:36:24 2012] Binned source spectrum to 10 counts/bin
[Fri Jan 27 01:36:24 2012] Setting source spectrum file to fullrun_mos1_xmm0102642301_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Fri Jan 27 01:36:24 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0102642301_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Fri Jan 27 02:34:51 2012] Updating aperture counts using extracted products
[Fri Jan 27 02:34:51 2012] Error reading totcts from fullrun_mos1_xmm0102642301_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Fri Jan 27 02:34:51 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jan 27 02:34:51 2012] Using photon index=1.80, rate=0.0937, arf fullrun_mos1_xmm0102642301_pi300-10000_pass1_cl_src1.arf
[Fri Jan 27 02:34:51 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jan 27 02:34:51 2012] Updating source flux to 9.3e-13
[Fri Jan 27 02:34:53 2012] Flag b found in src. 1 procflags, skipping spectral fitting