[Mon Aug 20 19:59:49 2012] Detection parameters:
  Position = (408.8, 374.2) = 1 34 25.75 30 55 18.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1863.8 +/- 52.5
  Background counts = 9.1
  Rate = 0.3 +/- 0.008

[Mon Aug 20 19:59:50 2012] Off-axis axis estimate = 9.70'
[Mon Aug 20 20:02:12 2012] Using EEF radius (= 11.28 ")to estimate initial spatial extent for simple fitting
[Mon Aug 20 20:02:12 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon Aug 20 20:02:12 2012] Initial guess for spatial extent in simple fitting = 11.28"
[Mon Aug 20 20:02:12 2012] source mask rpix=2.6, npix_max = 38, mask sum = 36, frac = 0.941
[Mon Aug 20 20:02:12 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 11.28"
[Mon Aug 20 20:48:35 2012] fullrun_pn_xmm0102642201_pi300-10000_cl_pass0_src1.ximg exists
[Mon Aug 20 20:48:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0102642201_pi300-10000_cl_pass0_src1.csv
[Mon Aug 20 20:48:35 2012] fullrun_pn_xmm0102642201_pi300-10000_cl_pass0_src1_1.ximg exists
[Mon Aug 20 20:48:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0102642201_pi300-10000_cl_pass0_src1.csv
[Mon Aug 20 20:48:35 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0102642201_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0102642201_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Aug 20 20:48:35 2012] fullrun_pn_xmm0102642201_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Mon Aug 20 20:48:35 2012] fullrun_pn_xmm0102642201_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Mon Aug 20 20:48:35 2012] Fit fullrun_pn_xmm0102642201_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Mon Aug 20 21:54:41 2012] Spatial fit model total counts = 1872.820000, observed total counts = 1873.000000
[Mon Aug 20 21:54:41 2012] Offset between fit and detection position for source 1 = 0.238916 pixels
[Mon Aug 20 21:54:41 2012] 1875.822000 total counts/ 434.382000 bgd. counts: snr = 69.160904
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.238916 pixels
  Position = (408.6, 374.2) = 1 34 25.83 30 55 18.2
  Extent = 6.5 (6.3-6.8)", rotation angle = 0
  Source counts = 1441.4 +/- 43.3
  Background counts = 434.4
  Rate = 0.1 +/- 0.004
[Mon Aug 20 21:54:42 2012] Vigneting correction estimate = 1.000000
[Mon Aug 20 21:54:42 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Aug 20 21:54:42 2012] Assessing source extent using major axis lower bound
[Mon Aug 20 21:54:42 2012] Source does appear to be extended
[Mon Aug 20 21:54:42 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Aug 20 21:55:05 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Aug 20 21:55:05 2012] Initial guess for spatial extent in simple fitting = 6.52"
[Mon Aug 20 21:55:05 2012] source mask rpix=1.5, npix_max = 15, mask sum = 16, frac = 1.001
[Mon Aug 20 21:55:05 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 6.52"
[Mon Aug 20 22:50:24 2012] fullrun_pn_xmm0102642201_pi300-10000_cl_pass1_src1.ximg exists
[Mon Aug 20 22:50:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0102642201_pi300-10000_cl_pass1_src1.csv
[Mon Aug 20 22:50:24 2012] fullrun_pn_xmm0102642201_pi300-10000_cl_pass1_src1_1.ximg exists
[Mon Aug 20 22:50:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0102642201_pi300-10000_cl_pass1_src1.csv
[Mon Aug 20 22:50:24 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0102642201_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0102642201_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Aug 20 22:50:24 2012] fullrun_pn_xmm0102642201_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Mon Aug 20 22:50:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0102642201_pi300-10000_cl_pass1_tfrozen_src1.csv
[Mon Aug 20 22:50:24 2012] fullrun_pn_xmm0102642201_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Mon Aug 20 22:50:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0102642201_pi300-10000_cl_pass1_tfrozen_src1.csv
[Mon Aug 20 22:50:24 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0102642201_pi300-10000_cl_pass1_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0102642201_pi300-10000_cl_pass1_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Aug 20 23:54:27 2012] Spatial fit model total counts = 1558.190000, observed total counts = 1752.000000
[Mon Aug 20 23:54:27 2012] Poor agreement between spatial fit and data for source 1
It may help to tweak spatial fit manually
Not incorporating fit results
[Mon Aug 20 23:54:27 2012] Vigneting correction estimate = 1.000000
[Mon Aug 20 23:54:27 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Aug 20 23:54:27 2012] Assessing source extent using major axis lower bound
[Mon Aug 20 23:54:27 2012] Source does appear to be extended
[Mon Aug 20 23:54:27 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Aug 20 23:54:49 2012] Counts = 1441.440000, rescaling region sizes by 2.000000
[Mon Aug 20 23:54:49 2012] XMMSAS src. selection expression = ellipse(35496.907400, 32511.231600, 782.638823, 782.638823, 0.000000, X, Y)
[Mon Aug 20 23:54:49 2012] Writing source region out to fullrun_pn_xmm0102642201_pi300-10000_pass1_cl_src1_src.reg
[Mon Aug 20 23:54:49 2012] Extracting stamp from image fullrun_pn_xmm0102642201_pi300-10000_cl_sm2.00.img.gz, (364, 329) - (454, 419)
[Mon Aug 20 23:54:49 2012] XMMSAS bgd. selection expression = annulus(35496.907400, 32511.231600, 2608.796075, 5217.592150, X, Y) && !ellipse(32169.128235, 32226.514038, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33640.484406, 35614.719055, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33044.572400, 34289.027800, 393.216811, 393.216811, 0.000000, X, Y) && !ellipse(33877.694000, 28503.204000, 423.600812, 423.600812, 0.000000, X, Y) && !ellipse(31203.849854, 29572.629059, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31919.433200, 28244.327800, 320.936009, 320.936009, 0.000000, X, Y)
[Mon Aug 20 23:54:49 2012] Writing fullrun_pn_xmm0102642201_pi300-10000_pass1_cl_src1.gif
[Mon Aug 20 23:55:02 2012] Mean detx,y = (5164.51, -8343.15) 
[Mon Aug 20 23:55:08 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Aug 20 23:56:47 2012] Binned source spectrum to 10 counts/bin
[Mon Aug 20 23:56:48 2012] Setting source spectrum file to fullrun_pn_xmm0102642201_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Mon Aug 20 23:56:48 2012] Setting bgd. spectrum file to fullrun_pn_xmm0102642201_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Tue Aug 21 00:55:53 2012] Updating aperture counts using extracted products
[Tue Aug 21 00:55:53 2012] Error reading totcts from fullrun_pn_xmm0102642201_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Tue Aug 21 00:55:54 2012] Calculating source flux in energy range 0.30-8.00
[Tue Aug 21 00:55:54 2012] Using photon index=1.80, rate=0.124, arf fullrun_pn_xmm0102642201_pi300-10000_pass1_cl_src1.arf
[Tue Aug 21 00:55:54 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Aug 21 00:55:54 2012] Updating source flux to 5.4e-13
[Tue Aug 21 00:56:21 2012] Flag p found in src. 1 procflags, skipping spectral fitting
[Tue Aug 21 00:56:37 2012] Reading fit data from xmm0102642201/analysis//spectral/fullrun_pn_xmm0102642201_pi300-10000_pass1_cl_src1_pl.csv
[Tue Aug 21 00:56:37 2012] Spectral fit parameter nH value = 1.68752e+21
[Tue Aug 21 00:56:37 2012] Spectral fit parameter PhoIndex value = 2.02048
[Tue Aug 21 00:56:37 2012] Failed to get F(0.3-8.0) from xmm0102642201/analysis//spectral/fullrun_pn_xmm0102642201_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Tue Aug 21 00:56:37 2012] Calculating source flux in energy range 0.30-8.00
[Tue Aug 21 00:56:37 2012] Using Nh = 1.7e+21, photon index=2.02, rate=0.124, arf fullrun_pn_xmm0102642201_pi300-10000_pass1_cl_src1.arf
[Tue Aug 21 00:56:37 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Aug 21 00:56:37 2012] Updating source flux to 6.5e-13