[Mon Aug 20 20:00:42 2012] Detection parameters:
  Position = (154.6, 230.9) = 1 35 51.59 30 44 53.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 168.6 +/- 15.8
  Background counts = 2.8
  Rate = 0.01 +/- 0.001

[Mon Aug 20 20:00:43 2012] Off-axis axis estimate = 11.52'
[Mon Aug 20 21:20:25 2012] Using EEF radius (= 12.19 ")to estimate initial spatial extent for simple fitting
[Mon Aug 20 21:20:25 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon Aug 20 21:20:25 2012] Initial guess for spatial extent in simple fitting = 12.19"
[Mon Aug 20 21:20:25 2012] source mask rpix=2.8, npix_max = 43, mask sum = 42, frac = 0.963
[Mon Aug 20 21:20:25 2012] Giving source the simple spatial ID 3 for pass 0, mean size = 12.19"
[Mon Aug 20 21:54:31 2012] fullrun_mos2_xmm0102642201_pi300-10000_cl_pass0_src3.ximg exists
[Mon Aug 20 21:54:31 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0102642201_pi300-10000_cl_pass0_src3.csv
[Mon Aug 20 21:54:31 2012] fullrun_mos2_xmm0102642201_pi300-10000_cl_pass0_src3_1.ximg exists
[Mon Aug 20 21:54:31 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0102642201_pi300-10000_cl_pass0_src3.csv
[Mon Aug 20 21:54:31 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0102642201_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0102642201_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Aug 20 21:54:31 2012] fullrun_mos2_xmm0102642201_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Mon Aug 20 21:54:31 2012] fullrun_mos2_xmm0102642201_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Mon Aug 20 21:54:31 2012] Fit fullrun_mos2_xmm0102642201_pi300-10000_cl_pass0_tfrozen_src3 appears to have run properly
[Mon Aug 20 21:54:52 2012] Spatial fit model total counts = 172.999000, observed total counts = 173.000000
[Mon Aug 20 21:54:52 2012] Offset between fit and detection position for source 2 = 0.037546 pixels
[Mon Aug 20 21:54:52 2012] 173.857500 total counts/ 65.359500 bgd. counts: snr = 13.420459
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.037546 pixels
  Position = (154.6, 230.9) = 1 35 51.58 30 44 54.4
  Extent = 4.8 (4.3-5.8)", rotation angle = 0
  Source counts = 108.5 +/- 13.2
  Background counts = 65.4
  Rate = 0.008 +/- 0.001
[Mon Aug 20 21:54:52 2012] Vigneting correction estimate = 1.000000
[Mon Aug 20 21:54:52 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Aug 20 21:54:52 2012] Assessing source extent using major axis lower bound
[Mon Aug 20 21:54:52 2012] Source does appear to be extended
[Mon Aug 20 21:54:52 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Aug 20 23:21:37 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Aug 20 23:21:37 2012] Initial guess for spatial extent in simple fitting = 4.84"
[Mon Aug 20 23:21:37 2012] source mask rpix=1.1, npix_max = 10, mask sum = 12, frac = 1.153
[Mon Aug 20 23:21:37 2012] Giving source the simple spatial ID 3 for pass 1, mean size = 4.84"
[Mon Aug 20 23:54:18 2012] fullrun_mos2_xmm0102642201_pi300-10000_cl_pass1_src3.ximg exists
[Mon Aug 20 23:54:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0102642201_pi300-10000_cl_pass1_src3.csv
[Mon Aug 20 23:54:18 2012] fullrun_mos2_xmm0102642201_pi300-10000_cl_pass1_src3_1.ximg exists
[Mon Aug 20 23:54:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0102642201_pi300-10000_cl_pass1_src3.csv
[Mon Aug 20 23:54:18 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0102642201_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0102642201_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Aug 20 23:54:18 2012] fullrun_mos2_xmm0102642201_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Mon Aug 20 23:54:18 2012] fullrun_mos2_xmm0102642201_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Mon Aug 20 23:54:18 2012] Fit fullrun_mos2_xmm0102642201_pi300-10000_cl_pass1_tfrozen_src3 appears to have run properly
[Mon Aug 20 23:54:38 2012] Spatial fit model total counts = 168.999000, observed total counts = 169.000000
[Mon Aug 20 23:54:38 2012] Offset between fit and detection position for source 2 = 0.006072 pixels
[Mon Aug 20 23:54:38 2012] 169.369500 total counts/ 61.116500 bgd. counts: snr = 13.847160
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.006072 pixels
  Position = (154.6, 230.9) = 1 35 51.58 30 44 54.4
  Extent = 4.9 (4.2-5.8)", rotation angle = 0
  Source counts = 108.3 +/- 13.0
  Background counts = 61.1
  Rate = 0.008 +/- 0.0009
[Mon Aug 20 23:54:38 2012] Vigneting correction estimate = 1.000000
[Mon Aug 20 23:54:38 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Aug 20 23:54:38 2012] Assessing source extent using major axis lower bound
[Mon Aug 20 23:54:38 2012] Source does appear to be extended
[Mon Aug 20 23:54:38 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Aug 21 00:41:37 2012] XMMSAS src. selection expression = ellipse(13405.884000, 20041.461200, 292.673408, 292.673408, 0.000000, X, Y)
[Tue Aug 21 00:41:37 2012] Writing source region out to fullrun_mos2_xmm0102642201_pi300-10000_pass1_cl_src2_src.reg
[Tue Aug 21 00:41:37 2012] Extracting stamp from image fullrun_mos2_xmm0102642201_pi300-10000_cl_sm2.00.img.gz, (138, 214) - (171, 248)
[Tue Aug 21 00:41:37 2012] XMMSAS bgd. selection expression = annulus(13405.884000, 20041.461200, 487.789014, 975.578028, X, Y)
[Tue Aug 21 00:41:37 2012] Writing fullrun_mos2_xmm0102642201_pi300-10000_pass1_cl_src2.gif
[Tue Aug 21 00:43:11 2012] Mean detx,y = (10313.44, -12013.66) 
[Tue Aug 21 00:43:13 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Aug 21 00:43:27 2012] Binned source spectrum to 10 counts/bin
[Tue Aug 21 00:43:28 2012] Setting source spectrum file to fullrun_mos2_xmm0102642201_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Tue Aug 21 00:43:28 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0102642201_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Tue Aug 21 00:55:57 2012] Updating aperture counts using extracted products
[Tue Aug 21 00:55:57 2012] Error reading totcts from fullrun_mos2_xmm0102642201_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Tue Aug 21 00:55:58 2012] Calculating source flux in energy range 0.30-8.00
[Tue Aug 21 00:55:58 2012] Using photon index=1.80, rate=0.0078, arf fullrun_mos2_xmm0102642201_pi300-10000_pass1_cl_src2.arf
[Tue Aug 21 00:55:58 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Aug 21 00:55:58 2012] Updating source flux to 3.5e-13
[Tue Aug 21 00:56:21 2012] Reading fit data from xmm0102642201/analysis//spectral/fullrun_mos2_xmm0102642201_pi300-10000_pass1_cl_src2_pl.csv
[Tue Aug 21 00:56:21 2012] Spectral fit parameter nH value = 5.86789e+21
[Tue Aug 21 00:56:21 2012] Spectral fit parameter PhoIndex value = 6.33981
[Tue Aug 21 00:56:21 2012] Failed to get F(0.3-8.0) from xmm0102642201/analysis//spectral/fullrun_mos2_xmm0102642201_pi300-10000_pass1_cl_src2_pl.csv, possibly due to different flux energy range selected
[Tue Aug 21 00:56:21 2012] Calculating source flux in energy range 0.30-8.00
[Tue Aug 21 00:56:21 2012] Using Nh = 5.9e+21, photon index=6.34, rate=0.0078, arf fullrun_mos2_xmm0102642201_pi300-10000_pass1_cl_src2.arf
[Tue Aug 21 00:56:21 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Aug 21 00:56:21 2012] Updating source flux to 2.1e-13