[Mon Aug 20 20:00:12 2012] Detection parameters:
  Position = (126.2, 321.0) = 1 36 1.23 30 51 27.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 39.8 +/- 8.0
  Background counts = 2.7
  Rate = 0.003 +/- 0.0006

[Mon Aug 20 20:00:12 2012] Off-axis axis estimate = 12.59'
[Mon Aug 20 20:48:35 2012] Using EEF radius (= 12.72 ")to estimate initial spatial extent for simple fitting
[Mon Aug 20 20:48:35 2012] Initial guess for spatial extent in simple fitting = 12.72"
[Mon Aug 20 20:48:35 2012] source mask rpix=2.9, npix_max = 46, mask sum = 42, frac = 0.895
[Mon Aug 20 20:48:35 2012] Giving source the simple spatial ID 11 for pass 0, mean size = 12.72"
[Mon Aug 20 21:20:24 2012] fullrun_mos1_xmm0102642201_pi300-10000_cl_pass0_src11.ximg exists
[Mon Aug 20 21:20:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0102642201_pi300-10000_cl_pass0_src11.csv
[Mon Aug 20 21:20:24 2012] fullrun_mos1_xmm0102642201_pi300-10000_cl_pass0_src11_1.ximg exists
[Mon Aug 20 21:20:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0102642201_pi300-10000_cl_pass0_src11.csv
[Mon Aug 20 21:20:24 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0102642201_pi300-10000_cl_pass0_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0102642201_pi300-10000_cl_pass0_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Aug 20 21:20:24 2012] fullrun_mos1_xmm0102642201_pi300-10000_cl_pass0_tfrozen_src11.ximg exists
[Mon Aug 20 21:20:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0102642201_pi300-10000_cl_pass0_tfrozen_src11.csv
[Mon Aug 20 21:20:24 2012] fullrun_mos1_xmm0102642201_pi300-10000_cl_pass0_tfrozen_src11_1.ximg exists
[Mon Aug 20 21:20:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0102642201_pi300-10000_cl_pass0_tfrozen_src11.csv
[Mon Aug 20 21:20:24 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0102642201_pi300-10000_cl_pass0_tfrozen_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0102642201_pi300-10000_cl_pass0_tfrozen_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Aug 20 21:54:47 2012] Spatial fit model total counts = 81.384700, observed total counts = 73.000000
[Mon Aug 20 21:54:47 2012] Offset between fit and detection position for source 5 = 0.161189 pixels
[Mon Aug 20 21:54:47 2012] 80.958500 total counts/ 56.797400 bgd. counts: snr = 3.205918
Spatial fit parameters:
  Offset between fit and detection position for source 5 = 0.161189 pixels
  Position = (126.4, 321.1) = 1 36 1.18 30 51 26.5
  Extent = 5.5 (3.6-8.7)", rotation angle = 0
  Source counts = 24.2 +/- 9.0
  Background counts = 56.8
  Rate = 0.002 +/- 0.0006
[Mon Aug 20 21:54:47 2012] Vigneting correction estimate = 1.000000
[Mon Aug 20 21:54:47 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Aug 20 21:54:47 2012] Assessing source extent using major axis lower bound
[Mon Aug 20 21:54:47 2012] Source does appear to be extended
[Mon Aug 20 21:54:47 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Aug 20 22:50:24 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Aug 20 22:50:24 2012] Initial guess for spatial extent in simple fitting = 5.51"
[Mon Aug 20 22:50:25 2012] source mask rpix=1.3, npix_max = 12, mask sum = 12, frac = 0.960
[Mon Aug 20 22:50:25 2012] Giving source the simple spatial ID 11 for pass 1, mean size = 5.51"
[Mon Aug 20 23:21:37 2012] fullrun_mos1_xmm0102642201_pi300-10000_cl_pass1_src11.ximg exists
[Mon Aug 20 23:21:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0102642201_pi300-10000_cl_pass1_src11.csv
[Mon Aug 20 23:21:37 2012] fullrun_mos1_xmm0102642201_pi300-10000_cl_pass1_src11_1.ximg exists
[Mon Aug 20 23:21:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0102642201_pi300-10000_cl_pass1_src11.csv
[Mon Aug 20 23:21:37 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0102642201_pi300-10000_cl_pass1_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0102642201_pi300-10000_cl_pass1_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Aug 20 23:21:37 2012] fullrun_mos1_xmm0102642201_pi300-10000_cl_pass1_tfrozen_src11.ximg exists
[Mon Aug 20 23:21:37 2012] fullrun_mos1_xmm0102642201_pi300-10000_cl_pass1_tfrozen_src11_1.ximg exists
[Mon Aug 20 23:21:37 2012] Fit fullrun_mos1_xmm0102642201_pi300-10000_cl_pass1_tfrozen_src11 appears to have run properly
[Mon Aug 20 23:54:32 2012] Spatial fit model total counts = 74.112900, observed total counts = 68.000000
[Mon Aug 20 23:54:32 2012] Offset between fit and detection position for source 5 = 0.087932 pixels
[Mon Aug 20 23:54:32 2012] 74.725800 total counts/ 50.949000 bgd. counts: snr = 3.331084
Spatial fit parameters:
  Offset between fit and detection position for source 5 = 0.087932 pixels
  Position = (126.4, 321.0) = 1 36 1.18 30 51 26.1
  Extent = 5.2 (3.4-8.7)", rotation angle = 0
  Source counts = 23.8 +/- 8.6
  Background counts = 50.9
  Rate = 0.002 +/- 0.0006
[Mon Aug 20 23:54:32 2012] Vigneting correction estimate = 1.000000
[Mon Aug 20 23:54:32 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Aug 20 23:54:32 2012] Assessing source extent using major axis lower bound
[Mon Aug 20 23:54:32 2012] Source does appear to be extended
[Mon Aug 20 23:54:32 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Aug 21 00:29:21 2012] XMMSAS src. selection expression = ellipse(10947.884400, 27880.278600, 312.222609, 312.222609, 0.000000, X, Y)
[Tue Aug 21 00:29:21 2012] Writing source region out to fullrun_mos1_xmm0102642201_pi300-10000_pass1_cl_src5_src.reg
[Tue Aug 21 00:29:21 2012] Extracting stamp from image fullrun_mos1_xmm0102642201_pi300-10000_cl_sm2.00.img.gz, (108, 303) - (144, 339)
[Tue Aug 21 00:29:21 2012] XMMSAS bgd. selection expression = annulus(10947.884400, 27880.278600, 520.371015, 1040.742030, X, Y)
[Tue Aug 21 00:29:21 2012] Writing fullrun_mos1_xmm0102642201_pi300-10000_pass1_cl_src5.gif
[Tue Aug 21 00:33:33 2012] Mean detx,y = (-5521.73, -15904.24) 
[Tue Aug 21 00:33:35 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Aug 21 00:33:51 2012] Binned source spectrum to 10 counts/bin
[Tue Aug 21 00:33:52 2012] Setting source spectrum file to fullrun_mos1_xmm0102642201_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Tue Aug 21 00:33:52 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0102642201_pi300-10000_pass1_cl_src5_bgd.pi.gz
[Tue Aug 21 00:40:57 2012] Not generating rmf since there are only 23 counts
[Tue Aug 21 00:40:57 2012] rmf not generated due to insufficient counts
[Tue Aug 21 00:55:56 2012] Updating aperture counts using extracted products
[Tue Aug 21 00:55:56 2012] Error reading totcts from fullrun_mos1_xmm0102642201_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Tue Aug 21 00:55:56 2012] Calculating source flux in energy range 0.30-8.00
[Tue Aug 21 00:55:56 2012] Using photon index=1.80, rate=0.00171, arf fullrun_mos1_xmm0102642201_pi300-10000_pass1_cl_src5.arf
[Tue Aug 21 00:55:56 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Aug 21 00:55:57 2012] Updating source flux to 7.7e-14
[Tue Aug 21 00:56:00 2012] Source 5 has fewer than 100.000000 counts, skipping spectral fitting