[Wed Jan 25 22:16:37 2012] Detection parameters:
  Position = (261.6, 229.0) = 1 34 53.06 30 28 11.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 55.4 +/- 10.3
  Background counts = 8.8
  Rate = 0.009 +/- 0.002

[Wed Jan 25 22:16:37 2012] Off-axis axis estimate = 5.70'
[Wed Jan 25 22:18:30 2012] Using EEF radius (= 9.28 ")to estimate initial spatial extent for simple fitting
[Wed Jan 25 22:18:30 2012] Initial guess for spatial extent in simple fitting = 9.28"
[Wed Jan 25 22:18:30 2012] source mask rpix=2.1, npix_max = 27, mask sum = 30, frac = 1.082
[Wed Jan 25 22:18:30 2012] Giving source the simple spatial ID 40 for pass 0, mean size = 9.28"
[Thu Jan 26 00:57:53 2012] fullrun_pn_xmm0102642101_pi300-10000_cl_pass0_src40.ximg exists
[Thu Jan 26 00:57:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0102642101_pi300-10000_cl_pass0_src40.csv
[Thu Jan 26 00:57:53 2012] fullrun_pn_xmm0102642101_pi300-10000_cl_pass0_src40_1.ximg exists
[Thu Jan 26 00:57:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0102642101_pi300-10000_cl_pass0_src40.csv
[Thu Jan 26 00:57:53 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0102642101_pi300-10000_cl_pass0_src40_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0102642101_pi300-10000_cl_pass0_src40.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jan 26 00:57:54 2012] fullrun_pn_xmm0102642101_pi300-10000_cl_pass0_tfrozen_src40.ximg exists
[Thu Jan 26 00:57:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0102642101_pi300-10000_cl_pass0_tfrozen_src40.csv
[Thu Jan 26 00:57:54 2012] fullrun_pn_xmm0102642101_pi300-10000_cl_pass0_tfrozen_src40_1.ximg exists
[Thu Jan 26 00:57:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0102642101_pi300-10000_cl_pass0_tfrozen_src40.csv
[Thu Jan 26 00:57:54 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0102642101_pi300-10000_cl_pass0_tfrozen_src40_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0102642101_pi300-10000_cl_pass0_tfrozen_src40.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jan 26 02:10:19 2012] Spatial fit model total counts = 243.509000, observed total counts = 274.000000
[Thu Jan 26 02:10:19 2012] Poor agreement between spatial fit and data for source 40
It may help to tweak spatial fit manually
Not incorporating fit results
[Thu Jan 26 02:10:19 2012] Vigneting correction estimate = 1.000000
[Thu Jan 26 02:10:19 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jan 26 02:10:19 2012] Assessing source extent using major
[Thu Jan 26 02:10:19 2012] Source does appear to be extended
[Thu Jan 26 02:10:19 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jan 26 02:10:33 2012] Using EEF radius (= 9.28 ")to estimate initial spatial extent for simple fitting
[Thu Jan 26 02:10:33 2012] Initial guess for spatial extent in simple fitting = 9.28"
[Thu Jan 26 02:10:33 2012] source mask rpix=2.1, npix_max = 27, mask sum = 30, frac = 1.082
[Thu Jan 26 02:10:33 2012] Giving source the simple spatial ID 37 for pass 1, mean size = 9.28"
[Thu Jan 26 08:48:09 2012] fullrun_pn_xmm0102642101_pi300-10000_cl_pass1_src37.ximg exists
[Thu Jan 26 08:48:09 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0102642101_pi300-10000_cl_pass1_src37.csv
[Thu Jan 26 08:48:09 2012] fullrun_pn_xmm0102642101_pi300-10000_cl_pass1_src37_1.ximg exists
[Thu Jan 26 08:48:09 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0102642101_pi300-10000_cl_pass1_src37.csv
[Thu Jan 26 08:48:09 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0102642101_pi300-10000_cl_pass1_src37_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0102642101_pi300-10000_cl_pass1_src37.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jan 26 08:48:10 2012] fullrun_pn_xmm0102642101_pi300-10000_cl_pass1_tfrozen_src37.ximg exists
[Thu Jan 26 08:48:10 2012] fullrun_pn_xmm0102642101_pi300-10000_cl_pass1_tfrozen_src37_1.ximg exists
[Thu Jan 26 08:48:10 2012] Fit fullrun_pn_xmm0102642101_pi300-10000_cl_pass1_tfrozen_src37 appears to have run properly
[Thu Jan 26 09:28:10 2012] Source 40 is offset by 5.210626 and -5.436438 pixels which is larger than
2 X fitted extent = 1.012722 x 1.012722, not incorporating fit results
[Thu Jan 26 09:28:10 2012] Warning, spatial fit 37 centroid is now closest to src. 2
[Thu Jan 26 09:28:10 2012] Vigneting correction estimate = 1.000000
[Thu Jan 26 09:28:10 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jan 26 09:28:10 2012] Assessing source extent using major
[Thu Jan 26 09:28:10 2012] Source does appear to be extended
[Thu Jan 26 09:28:10 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jan 26 09:28:25 2012] XMMSAS src. selection expression = ellipse(22711.470490, 19871.175903, 652.500000, 652.500000, 0.000000, X, Y)
[Thu Jan 26 09:28:25 2012] Writing source region out to fullrun_pn_xmm0102642101_pi300-10000_pass1_cl_src40_src.reg
[Thu Jan 26 09:28:25 2012] Extracting stamp from image fullrun_pn_xmm0102642101_pi300-10000_cl_sm2.00.img.gz, (224, 191) - (299, 266)
[Thu Jan 26 09:28:25 2012] XMMSAS bgd. selection expression = annulus(22711.470490, 19871.175903, 1087.500000, 2175.000000, X, Y) && !ellipse(23058.212000, 20703.820000, 863.736025, 863.736025, 0.000000, X, Y)
[Thu Jan 26 09:28:25 2012] Writing fullrun_pn_xmm0102642101_pi300-10000_pass1_cl_src40.gif
[Thu Jan 26 09:54:10 2012] Mean detx,y = (-1570.91, 8155.78) 
[Thu Jan 26 09:54:13 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Jan 26 09:54:41 2012] Binned source spectrum to 10 counts/bin
[Thu Jan 26 09:54:41 2012] Setting source spectrum file to fullrun_pn_xmm0102642101_pi300-10000_pass1_cl_src40_src_b10.pi.gz
[Thu Jan 26 09:54:41 2012] Setting bgd. spectrum file to fullrun_pn_xmm0102642101_pi300-10000_pass1_cl_src40_bgd.pi.gz
[Thu Jan 26 10:48:42 2012] Not generating rmf since there are only 55 counts
[Thu Jan 26 10:48:42 2012] rmf not generated due to insufficient counts
[Thu Jan 26 11:25:09 2012] Updating aperture counts using extracted products
[Thu Jan 26 11:25:10 2012] Error reading totcts from fullrun_pn_xmm0102642101_pi300-10000_pass1_cl_src40_src_b10.pi.gz
[Thu Jan 26 11:25:11 2012] Calculating source flux in energy range 0.30-8.00
[Thu Jan 26 11:25:11 2012] Using photon index=1.80, rate=0.00949, arf fullrun_pn_xmm0102642101_pi300-10000_pass1_cl_src40.arf
[Thu Jan 26 11:25:11 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jan 26 11:25:11 2012] Updating source flux to 3.9e-14
[Thu Jan 26 11:27:07 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting