[Wed Jan 25 22:16:36 2012] Detection parameters:
  Position = (419.2, 321.1) = 1 34 0.01 30 34 53.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 47.5 +/- 10.4
  Background counts = 16.6
  Rate = 0.008 +/- 0.002

[Wed Jan 25 22:16:37 2012] Off-axis axis estimate = 8.90'
[Wed Jan 25 22:18:30 2012] Using EEF radius (= 10.88 ")to estimate initial spatial extent for simple fitting
[Wed Jan 25 22:18:30 2012] Initial guess for spatial extent in simple fitting = 10.88"
[Wed Jan 25 22:18:30 2012] source mask rpix=2.5, npix_max = 36, mask sum = 36, frac = 0.999
[Wed Jan 25 22:18:30 2012] Giving source the simple spatial ID 23 for pass 0, mean size = 10.88"
[Thu Jan 26 00:57:53 2012] fullrun_pn_xmm0102642101_pi300-10000_cl_pass0_src23.ximg exists
[Thu Jan 26 00:57:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0102642101_pi300-10000_cl_pass0_src23.csv
[Thu Jan 26 00:57:53 2012] fullrun_pn_xmm0102642101_pi300-10000_cl_pass0_src23_1.ximg exists
[Thu Jan 26 00:57:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0102642101_pi300-10000_cl_pass0_src23.csv
[Thu Jan 26 00:57:53 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0102642101_pi300-10000_cl_pass0_src23_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0102642101_pi300-10000_cl_pass0_src23.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jan 26 00:57:53 2012] fullrun_pn_xmm0102642101_pi300-10000_cl_pass0_tfrozen_src23.ximg exists
[Thu Jan 26 00:57:54 2012] fullrun_pn_xmm0102642101_pi300-10000_cl_pass0_tfrozen_src23_1.ximg exists
[Thu Jan 26 00:57:54 2012] Fit fullrun_pn_xmm0102642101_pi300-10000_cl_pass0_tfrozen_src23 appears to have run properly
[Thu Jan 26 02:10:19 2012] Spatial fit model total counts = 291.236000, observed total counts = 293.000000
[Thu Jan 26 02:10:19 2012] Offset between fit and detection position for source 23 = 4.738887 pixels
[Thu Jan 26 02:10:19 2012] Warning, changing simple spatial fit ID from 23 to 22
[Thu Jan 26 02:10:19 2012] 311.837600 total counts/ 81.299600 bgd. counts: snr = 25.568092
Spatial fit parameters:
  Offset between fit and detection position for source 23 = 4.738887 pixels
  Position = (419.7, 325.8) = 1 33 59.82 30 35 12.9
  Extent = 22.2 (22.2-44.4)", rotation angle = 0
  Source counts = 230.5 +/- 17.7
  Background counts = 81.3
  Rate = 0.02 +/- 0.002
[Thu Jan 26 02:10:19 2012] Spatial fit model total counts = 302.536000, observed total counts = 302.000000
[Thu Jan 26 02:10:19 2012] Offset between fit and detection position for source 23 = 2.619608 pixels
[Thu Jan 26 02:10:19 2012] Warning, changing simple spatial fit ID from 22 to 23
[Thu Jan 26 02:10:19 2012] 274.713600 total counts/ 53.891600 bgd. counts: snr = 30.080275
Spatial fit parameters:
  Offset between fit and detection position for source 23 = 2.619608 pixels
  Position = (420.8, 328.2) = 1 33 59.46 30 35 23.3
  Extent = 21.7 (21.7-21.8)", rotation angle = 0
  Source counts = 220.8 +/- 16.6
  Background counts = 53.9
  Rate = 0.02 +/- 0.002
[Thu Jan 26 02:10:19 2012] Vigneting correction estimate = 1.000000
[Thu Jan 26 02:10:19 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jan 26 02:10:19 2012] Assessing source extent using major axis lower bound
[Thu Jan 26 02:10:19 2012] Source does appear to be extended
[Thu Jan 26 02:10:19 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jan 26 02:10:19 2012] Source is confused with source 20
[Thu Jan 26 02:10:33 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Jan 26 02:10:33 2012] Initial guess for spatial extent in simple fitting = 21.73"
[Thu Jan 26 02:10:33 2012] source mask rpix=5.0, npix_max = 120, mask sum = 121, frac = 1.001
[Thu Jan 26 02:10:33 2012] Giving source the simple spatial ID 21 for pass 1, mean size = 21.73"
[Thu Jan 26 08:48:09 2012] fullrun_pn_xmm0102642101_pi300-10000_cl_pass1_src21.ximg exists
[Thu Jan 26 08:48:09 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0102642101_pi300-10000_cl_pass1_src21.csv
[Thu Jan 26 08:48:09 2012] fullrun_pn_xmm0102642101_pi300-10000_cl_pass1_src21_1.ximg exists
[Thu Jan 26 08:48:09 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0102642101_pi300-10000_cl_pass1_src21.csv
[Thu Jan 26 08:48:09 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0102642101_pi300-10000_cl_pass1_src21_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0102642101_pi300-10000_cl_pass1_src21.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jan 26 08:48:09 2012] fullrun_pn_xmm0102642101_pi300-10000_cl_pass1_tfrozen_src21.ximg exists
[Thu Jan 26 08:48:09 2012] fullrun_pn_xmm0102642101_pi300-10000_cl_pass1_tfrozen_src21_1.ximg exists
[Thu Jan 26 08:48:09 2012] Fit fullrun_pn_xmm0102642101_pi300-10000_cl_pass1_tfrozen_src21 appears to have run properly
[Thu Jan 26 09:28:10 2012] Warning, spatial fit 21 centroid is now closest to src. 22
[Thu Jan 26 09:28:10 2012] Vigneting correction estimate = 1.000000
[Thu Jan 26 09:28:10 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jan 26 09:28:10 2012] Assessing source extent using major axis lower bound
[Thu Jan 26 09:28:10 2012] Source does appear to be extended
[Thu Jan 26 09:28:10 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jan 26 09:28:24 2012] XMMSAS src. selection expression = ellipse(36558.759200, 28500.872000, 1303.974038, 1303.974038, 0.000000, X, Y)
[Thu Jan 26 09:28:24 2012] Writing source region out to fullrun_pn_xmm0102642101_pi300-10000_pass1_cl_src23_src.reg
[Thu Jan 26 09:28:24 2012] Extracting stamp from image fullrun_pn_xmm0102642101_pi300-10000_cl_sm2.00.img.gz, (346, 253) - (496, 403)
[Thu Jan 26 09:28:24 2012] XMMSAS bgd. selection expression = annulus(36558.759200, 28500.872000, 2173.290063, 4346.580125, X, Y) && !ellipse(38863.362000, 33422.002000, 748.296822, 748.296822, 0.000000, X, Y) && !ellipse(40340.164000, 33751.388000, 2074.200060, 2074.200060, 0.000000, X, Y) && !ellipse(39899.036285, 32830.241150, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(39625.273560, 32377.773712, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38249.358000, 31746.722000, 1896.072055, 1896.072055, 0.000000, X, Y) && !ellipse(37775.486000, 31209.806000, 3084.112089, 980.984028, 119.911000, X, Y) && !ellipse(37452.364000, 30926.886000, 1542.056044, 1542.056044, 0.000000, X, Y) && !ellipse(37355.209800, 30655.276000, 1597.160046, 469.224814, 78.749000, X, Y) && !ellipse(36923.186600, 29194.161200, 1791.760052, 501.943214, 294.823000, X, Y) && !ellipse(34432.761078, 29089.188049, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36779.870697, 28735.429291, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36300.866000, 28228.184000, 1776.864051, 1776.864051, 0.000000, X, Y) && !ellipse(35785.672775, 26736.425984, 1172.696034, 924.034913, 90.000000, X, Y) && !ellipse(37744.684448, 25856.408447, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35380.000200, 25678.414600, 1657.320048, 477.538414, 114.975000, X, Y) && !ellipse(35323.316600, 25433.958800, 1232.152035, 1232.152035, 0.000000, X, Y) && !ellipse(36073.924620, 23940.286000, 539.448816, 539.448816, 0.000000, X, Y)
[Thu Jan 26 09:28:24 2012] Writing fullrun_pn_xmm0102642101_pi300-10000_pass1_cl_src23.gif
[Thu Jan 26 09:45:29 2012] Mean detx,y = (7701.56, -5041.08) 
[Thu Jan 26 09:45:31 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Jan 26 09:46:02 2012] Binned source spectrum to 10 counts/bin
[Thu Jan 26 09:46:02 2012] Setting source spectrum file to fullrun_pn_xmm0102642101_pi300-10000_pass1_cl_src23_src_b10.pi.gz
[Thu Jan 26 09:46:02 2012] Setting bgd. spectrum file to fullrun_pn_xmm0102642101_pi300-10000_pass1_cl_src23_bgd.pi.gz
[Thu Jan 26 11:25:09 2012] Updating aperture counts using extracted products
[Thu Jan 26 11:25:09 2012] Error reading totcts from fullrun_pn_xmm0102642101_pi300-10000_pass1_cl_src23_src_b10.pi.gz
[Thu Jan 26 11:25:11 2012] Calculating source flux in energy range 0.30-8.00
[Thu Jan 26 11:25:11 2012] Using photon index=1.80, rate=0.0221, arf fullrun_pn_xmm0102642101_pi300-10000_pass1_cl_src23.arf
[Thu Jan 26 11:25:11 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jan 26 11:25:11 2012] Updating source flux to 8.2e-14
[Thu Jan 26 11:27:07 2012] Flag c found in src. 23 procflags, skipping spectral fitting