[Wed Jan 25 22:16:36 2012] Detection parameters:
  Position = (430.5, 351.0) = 1 33 56.16 30 36 59.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 76.9 +/- 13.1
  Background counts = 17.4
  Rate = 0.01 +/- 0.002

[Wed Jan 25 22:16:37 2012] Off-axis axis estimate = 10.31'
[Wed Jan 25 22:18:30 2012] Using EEF radius (= 11.58 ")to estimate initial spatial extent for simple fitting
[Wed Jan 25 22:18:30 2012] Initial guess for spatial extent in simple fitting = 11.58"
[Wed Jan 25 22:18:30 2012] source mask rpix=2.7, npix_max = 40, mask sum = 42, frac = 1.050
[Wed Jan 25 22:18:30 2012] Giving source the simple spatial ID 19 for pass 0, mean size = 11.58"
[Thu Jan 26 00:57:53 2012] fullrun_pn_xmm0102642101_pi300-10000_cl_pass0_src19.ximg exists
[Thu Jan 26 00:57:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0102642101_pi300-10000_cl_pass0_src19.csv
[Thu Jan 26 00:57:53 2012] fullrun_pn_xmm0102642101_pi300-10000_cl_pass0_src19_1.ximg exists
[Thu Jan 26 00:57:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0102642101_pi300-10000_cl_pass0_src19.csv
[Thu Jan 26 00:57:53 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0102642101_pi300-10000_cl_pass0_src19_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0102642101_pi300-10000_cl_pass0_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jan 26 00:57:53 2012] fullrun_pn_xmm0102642101_pi300-10000_cl_pass0_tfrozen_src19.ximg exists
[Thu Jan 26 00:57:53 2012] fullrun_pn_xmm0102642101_pi300-10000_cl_pass0_tfrozen_src19_1.ximg exists
[Thu Jan 26 00:57:53 2012] Fit fullrun_pn_xmm0102642101_pi300-10000_cl_pass0_tfrozen_src19 appears to have run properly
[Thu Jan 26 02:10:19 2012] Spatial fit model total counts = 372.788000, observed total counts = 373.000000
[Thu Jan 26 02:10:19 2012] Offset between fit and detection position for source 19 = 2.019059 pixels
[Thu Jan 26 02:10:19 2012] Warning, changing simple spatial fit ID from 19 to 18
[Thu Jan 26 02:10:19 2012] 334.932800 total counts/ 246.145000 bgd. counts: snr = 5.659236
Spatial fit parameters:
  Offset between fit and detection position for source 19 = 2.019059 pixels
  Position = (429.9, 352.9) = 1 33 56.36 30 37 10.9
  Extent = 20.0 (13.5-23.2)" x 5.9 (4.2-8.1)", rotation angle = 79 (70-89) degrees
  Source counts = 88.8 +/- 18.3
  Background counts = 246.1
  Rate = 0.009 +/- 0.002
[Thu Jan 26 02:10:19 2012] Vigneting correction estimate = 1.000000
[Thu Jan 26 02:10:19 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jan 26 02:10:19 2012] Assessing source extent using major axis lower bound
[Thu Jan 26 02:10:19 2012] Source does appear to be extended
[Thu Jan 26 02:10:19 2012] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.66
[Thu Jan 26 02:10:19 2012] Source is asymmetric
[Thu Jan 26 02:10:19 2012] Source is confused with source 16
[Thu Jan 26 02:10:33 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Jan 26 02:10:33 2012] Initial guess for spatial extent in simple fitting = 12.91"
[Thu Jan 26 02:10:33 2012] source mask rpix=3.0, npix_max = 48, mask sum = 49, frac = 1.018
[Thu Jan 26 02:10:33 2012] Giving source the simple spatial ID 17 for pass 1, mean size = 12.91"
[Thu Jan 26 08:48:09 2012] fullrun_pn_xmm0102642101_pi300-10000_cl_pass1_src17.ximg exists
[Thu Jan 26 08:48:09 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0102642101_pi300-10000_cl_pass1_src17.csv
[Thu Jan 26 08:48:09 2012] fullrun_pn_xmm0102642101_pi300-10000_cl_pass1_src17_1.ximg exists
[Thu Jan 26 08:48:09 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0102642101_pi300-10000_cl_pass1_src17.csv
[Thu Jan 26 08:48:09 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0102642101_pi300-10000_cl_pass1_src17_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0102642101_pi300-10000_cl_pass1_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jan 26 08:48:09 2012] fullrun_pn_xmm0102642101_pi300-10000_cl_pass1_tfrozen_src17.ximg exists
[Thu Jan 26 08:48:09 2012] fullrun_pn_xmm0102642101_pi300-10000_cl_pass1_tfrozen_src17_1.ximg exists
[Thu Jan 26 08:48:09 2012] Fit fullrun_pn_xmm0102642101_pi300-10000_cl_pass1_tfrozen_src17 appears to have run properly
[Thu Jan 26 09:28:10 2012] Warning, spatial fit 17 centroid is now closest to src. 22
[Thu Jan 26 09:28:10 2012] Vigneting correction estimate = 1.000000
[Thu Jan 26 09:28:10 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jan 26 09:28:10 2012] Assessing source extent using major axis lower bound
[Thu Jan 26 09:28:10 2012] Source does appear to be extended
[Thu Jan 26 09:28:10 2012] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.66
[Thu Jan 26 09:28:10 2012] Source is asymmetric
[Thu Jan 26 09:28:24 2012] XMMSAS src. selection expression = ellipse(37355.209800, 30655.276000, 1197.870034, 351.918610, 78.749000, X, Y)
[Thu Jan 26 09:28:24 2012] Writing source region out to fullrun_pn_xmm0102642101_pi300-10000_pass1_cl_src19_src.reg
[Thu Jan 26 09:28:24 2012] Extracting stamp from image fullrun_pn_xmm0102642101_pi300-10000_cl_sm2.00.img.gz, (361, 284) - (499, 422)
[Thu Jan 26 09:28:24 2012] XMMSAS bgd. selection expression = annulus(37355.209800, 30655.276000, 1996.450057, 3992.900115, X, Y) && !ellipse(38863.362000, 33422.002000, 748.296822, 748.296822, 0.000000, X, Y) && !ellipse(40525.290000, 37504.342000, 3660.992105, 3660.992105, 0.000000, X, Y) && !ellipse(39681.116000, 35928.156000, 1693.344049, 1693.344049, 0.000000, X, Y) && !ellipse(39861.666000, 35964.560000, 2062.920059, 2062.920059, 0.000000, X, Y) && !ellipse(40340.164000, 33751.388000, 2074.200060, 2074.200060, 0.000000, X, Y) && !ellipse(39899.036285, 32830.241150, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(39625.273560, 32377.773712, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38249.358000, 31746.722000, 1896.072055, 1896.072055, 0.000000, X, Y) && !ellipse(37775.486000, 31209.806000, 3084.112089, 980.984028, 119.911000, X, Y) && !ellipse(37452.364000, 30926.886000, 1542.056044, 1542.056044, 0.000000, X, Y) && !ellipse(36923.186600, 29194.161200, 1791.760052, 501.943214, 294.823000, X, Y) && !ellipse(34432.761078, 29089.188049, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36779.870697, 28735.429291, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36558.759200, 28500.872000, 1738.632050, 1738.632050, 0.000000, X, Y) && !ellipse(36300.866000, 28228.184000, 1776.864051, 1776.864051, 0.000000, X, Y) && !ellipse(35785.672775, 26736.425984, 1172.696034, 924.034913, 90.000000, X, Y) && !ellipse(37744.684448, 25856.408447, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35380.000200, 25678.414600, 1657.320048, 477.538414, 114.975000, X, Y) && !ellipse(35323.316600, 25433.958800, 1232.152035, 1232.152035, 0.000000, X, Y)
[Thu Jan 26 09:28:24 2012] Writing fullrun_pn_xmm0102642101_pi300-10000_pass1_cl_src19.gif
[Thu Jan 26 09:43:55 2012] Mean detx,y = (7611.85, -7382.59) 
[Thu Jan 26 09:43:57 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Jan 26 09:44:13 2012] Binned source spectrum to 10 counts/bin
[Thu Jan 26 09:44:14 2012] Setting source spectrum file to fullrun_pn_xmm0102642101_pi300-10000_pass1_cl_src19_src_b10.pi.gz
[Thu Jan 26 09:44:14 2012] Setting bgd. spectrum file to fullrun_pn_xmm0102642101_pi300-10000_pass1_cl_src19_bgd.pi.gz
[Thu Jan 26 10:27:51 2012] Not generating rmf since there are only 88 counts
[Thu Jan 26 10:27:51 2012] rmf not generated due to insufficient counts
[Thu Jan 26 11:25:08 2012] Updating aperture counts using extracted products
[Thu Jan 26 11:25:08 2012] Error reading totcts from fullrun_pn_xmm0102642101_pi300-10000_pass1_cl_src19_src_b10.pi.gz
[Thu Jan 26 11:25:10 2012] Calculating source flux in energy range 0.30-8.00
[Thu Jan 26 11:25:10 2012] Using photon index=1.80, rate=0.00888, arf fullrun_pn_xmm0102642101_pi300-10000_pass1_cl_src19.arf
[Thu Jan 26 11:25:10 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jan 26 11:25:10 2012] Updating source flux to 4.2e-14
[Thu Jan 26 11:27:07 2012] Flag c found in src. 19 procflags, skipping spectral fitting
[Thu Jan 26 11:27:07 2012] Source 19 has fewer than 100.000000 counts, skipping spectral fitting