[Wed Jan 25 22:16:36 2012] Detection parameters:
  Position = (435.2, 359.0) = 1 33 54.58 30 37 37.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 44.2 +/- 10.8
  Background counts = 17.2
  Rate = 0.004 +/- 0.001

[Wed Jan 25 22:16:37 2012] Off-axis axis estimate = 10.84'
[Wed Jan 25 22:18:30 2012] Using EEF radius (= 11.85 ")to estimate initial spatial extent for simple fitting
[Wed Jan 25 22:18:30 2012] Initial guess for spatial extent in simple fitting = 11.85"
[Wed Jan 25 22:18:30 2012] source mask rpix=2.7, npix_max = 41, mask sum = 36, frac = 0.866
[Wed Jan 25 22:18:30 2012] Giving source the simple spatial ID 17 for pass 0, mean size = 11.85"
[Thu Jan 26 00:57:53 2012] fullrun_pn_xmm0102642101_pi300-10000_cl_pass0_src17.ximg exists
[Thu Jan 26 00:57:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0102642101_pi300-10000_cl_pass0_src17.csv
[Thu Jan 26 00:57:53 2012] fullrun_pn_xmm0102642101_pi300-10000_cl_pass0_src17_1.ximg exists
[Thu Jan 26 00:57:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0102642101_pi300-10000_cl_pass0_src17.csv
[Thu Jan 26 00:57:53 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0102642101_pi300-10000_cl_pass0_src17_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0102642101_pi300-10000_cl_pass0_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jan 26 00:57:53 2012] fullrun_pn_xmm0102642101_pi300-10000_cl_pass0_tfrozen_src17.ximg exists
[Thu Jan 26 00:57:53 2012] fullrun_pn_xmm0102642101_pi300-10000_cl_pass0_tfrozen_src17_1.ximg exists
[Thu Jan 26 00:57:53 2012] Fit fullrun_pn_xmm0102642101_pi300-10000_cl_pass0_tfrozen_src17 appears to have run properly
[Thu Jan 26 02:10:19 2012] Spatial fit model total counts = 759.141000, observed total counts = 758.000000
[Thu Jan 26 02:10:19 2012] Offset between fit and detection position for source 17 = 2.645459 pixels
[Thu Jan 26 02:10:19 2012] Warning, changing simple spatial fit ID from 17 to 16
[Thu Jan 26 02:10:19 2012] 879.936000 total counts/ 292.158000 bgd. counts: snr = 34.387803
Spatial fit parameters:
  Offset between fit and detection position for source 17 = 2.645459 pixels
  Position = (434.9, 361.7) = 1 33 54.68 30 37 49.0
  Extent = 24.4 (24.3-48.8)", rotation angle = 0
  Source counts = 587.8 +/- 29.7
  Background counts = 292.2
  Rate = 0.06 +/- 0.003
[Thu Jan 26 02:10:19 2012] Vigneting correction estimate = 1.000000
[Thu Jan 26 02:10:19 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jan 26 02:10:19 2012] Assessing source extent using major axis lower bound
[Thu Jan 26 02:10:19 2012] Source does appear to be extended
[Thu Jan 26 02:10:19 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jan 26 02:10:19 2012] Source is confused with source 16
[Thu Jan 26 02:10:33 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Jan 26 02:10:33 2012] Initial guess for spatial extent in simple fitting = 24.39"
[Thu Jan 26 02:10:33 2012] source mask rpix=5.6, npix_max = 149, mask sum = 144, frac = 0.965
[Thu Jan 26 02:10:33 2012] Giving source the simple spatial ID 15 for pass 1, mean size = 24.39"
[Thu Jan 26 08:48:09 2012] fullrun_pn_xmm0102642101_pi300-10000_cl_pass1_src15.ximg exists
[Thu Jan 26 08:48:09 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0102642101_pi300-10000_cl_pass1_src15.csv
[Thu Jan 26 08:48:09 2012] fullrun_pn_xmm0102642101_pi300-10000_cl_pass1_src15_1.ximg exists
[Thu Jan 26 08:48:09 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0102642101_pi300-10000_cl_pass1_src15.csv
[Thu Jan 26 08:48:09 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0102642101_pi300-10000_cl_pass1_src15_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0102642101_pi300-10000_cl_pass1_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jan 26 08:48:09 2012] fullrun_pn_xmm0102642101_pi300-10000_cl_pass1_tfrozen_src15.ximg exists
[Thu Jan 26 08:48:09 2012] fullrun_pn_xmm0102642101_pi300-10000_cl_pass1_tfrozen_src15_1.ximg exists
[Thu Jan 26 08:48:09 2012] Fit fullrun_pn_xmm0102642101_pi300-10000_cl_pass1_tfrozen_src15 appears to have run properly
[Thu Jan 26 09:28:10 2012] Warning, spatial fit 15 centroid is now closest to src. 15
[Thu Jan 26 09:28:10 2012] Spatial fit model total counts = 809.296000, observed total counts = 810.000000
[Thu Jan 26 09:28:10 2012] Offset between fit and detection position for source 17 = 2.384808 pixels
[Thu Jan 26 09:28:10 2012] Warning, changing simple spatial fit ID from 15 to 16
[Thu Jan 26 09:28:10 2012] 775.639000 total counts/ 362.995000 bgd. counts: snr = 21.658342
Spatial fit parameters:
  Offset between fit and detection position for source 17 = 2.384808 pixels
  Position = (434.8, 359.3) = 1 33 54.73 30 37 38.6
  Extent = 38.6 (38.5-77.1)" x 12.3 (10.4-14.6)", rotation angle = 120 (116-123) degrees
  Source counts = 412.6 +/- 27.9
  Background counts = 363.0
  Rate = 0.04 +/- 0.003
[Thu Jan 26 09:28:10 2012] Vigneting correction estimate = 1.000000
[Thu Jan 26 09:28:10 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jan 26 09:28:10 2012] Assessing source extent using major axis lower bound
[Thu Jan 26 09:28:10 2012] Source does appear to be extended
[Thu Jan 26 09:28:10 2012] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 2.64
[Thu Jan 26 09:28:10 2012] Source is asymmetric
[Thu Jan 26 09:28:24 2012] XMMSAS src. selection expression = ellipse(37775.486000, 31209.806000, 2313.084067, 735.738021, 119.911000, X, Y)
[Thu Jan 26 09:28:24 2012] Writing source region out to fullrun_pn_xmm0102642101_pi300-10000_pass1_cl_src17_src.reg
[Thu Jan 26 09:28:24 2012] Extracting stamp from image fullrun_pn_xmm0102642101_pi300-10000_cl_sm2.00.img.gz, (302, 226) - (568, 492)
[Thu Jan 26 09:28:24 2012] XMMSAS bgd. selection expression = annulus(37775.486000, 31209.806000, 3855.140111, 7710.280222, X, Y) && !ellipse(38863.362000, 33422.002000, 748.296822, 748.296822, 0.000000, X, Y) && !ellipse(40917.845367, 38309.401215, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(40525.290000, 37504.342000, 3660.992105, 3660.992105, 0.000000, X, Y) && !ellipse(40344.876000, 37012.894000, 1919.656055, 1919.656055, 0.000000, X, Y) && !ellipse(33674.998400, 36929.783200, 359.971210, 359.971210, 0.000000, X, Y) && !ellipse(39681.116000, 35928.156000, 1693.344049, 1693.344049, 0.000000, X, Y) && !ellipse(39861.666000, 35964.560000, 2062.920059, 2062.920059, 0.000000, X, Y) && !ellipse(40340.164000, 33751.388000, 2074.200060, 2074.200060, 0.000000, X, Y) && !ellipse(39899.036285, 32830.241150, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(39625.273560, 32377.773712, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38249.358000, 31746.722000, 1896.072055, 1896.072055, 0.000000, X, Y) && !ellipse(37452.364000, 30926.886000, 1542.056044, 1542.056044, 0.000000, X, Y) && !ellipse(37355.209800, 30655.276000, 1597.160046, 469.224814, 78.749000, X, Y) && !ellipse(36923.186600, 29194.161200, 1791.760052, 501.943214, 294.823000, X, Y) && !ellipse(34432.761078, 29089.188049, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36779.870697, 28735.429291, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36558.759200, 28500.872000, 1738.632050, 1738.632050, 0.000000, X, Y) && !ellipse(36300.866000, 28228.184000, 1776.864051, 1776.864051, 0.000000, X, Y) && !ellipse(35785.672775, 26736.425984, 1172.696034, 924.034913, 90.000000, X, Y) && !ellipse(37744.684448, 25856.408447, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35380.000200, 25678.414600, 1657.320048, 477.538414, 114.975000, X, Y) && !ellipse(35323.316600, 25433.958800, 1232.152035, 1232.152035, 0.000000, X, Y) && !ellipse(36073.924620, 23940.286000, 539.448816, 539.448816, 0.000000, X, Y)
[Thu Jan 26 09:28:24 2012] Writing fullrun_pn_xmm0102642101_pi300-10000_pass1_cl_src17.gif
[Thu Jan 26 09:41:24 2012] Mean detx,y = (7603.40, -8130.90) 
[Thu Jan 26 09:41:27 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Jan 26 09:43:21 2012] Binned source spectrum to 10 counts/bin
[Thu Jan 26 09:43:21 2012] Setting source spectrum file to fullrun_pn_xmm0102642101_pi300-10000_pass1_cl_src17_src_b10.pi.gz
[Thu Jan 26 09:43:21 2012] Setting bgd. spectrum file to fullrun_pn_xmm0102642101_pi300-10000_pass1_cl_src17_bgd.pi.gz
[Thu Jan 26 11:25:08 2012] Updating aperture counts using extracted products
[Thu Jan 26 11:25:08 2012] Error reading totcts from fullrun_pn_xmm0102642101_pi300-10000_pass1_cl_src17_src_b10.pi.gz
[Thu Jan 26 11:25:10 2012] Calculating source flux in energy range 0.30-8.00
[Thu Jan 26 11:25:10 2012] Using photon index=1.80, rate=0.0413, arf fullrun_pn_xmm0102642101_pi300-10000_pass1_cl_src17.arf
[Thu Jan 26 11:25:10 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jan 26 11:25:10 2012] Updating source flux to 1.9e-13
[Thu Jan 26 11:27:07 2012] Flag c found in src. 17 procflags, skipping spectral fitting