[Wed Jan 25 22:16:36 2012] Detection parameters:
  Position = (457.8, 382.7) = 1 33 46.94 30 39 28.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 63.2 +/- 14.1
  Background counts = 15.8
  Rate = 0.006 +/- 0.001

[Wed Jan 25 22:16:37 2012] Off-axis axis estimate = 13.07'
[Wed Jan 25 22:18:30 2012] Using EEF radius (= 12.96 ")to estimate initial spatial extent for simple fitting
[Wed Jan 25 22:18:30 2012] Initial guess for spatial extent in simple fitting = 12.96"
[Wed Jan 25 22:18:30 2012] source mask rpix=3.0, npix_max = 48, mask sum = 26, frac = 0.537
[Wed Jan 25 22:18:30 2012] Giving source the simple spatial ID 13 for pass 0, mean size = 12.96"
[Thu Jan 26 00:57:53 2012] fullrun_pn_xmm0102642101_pi300-10000_cl_pass0_src13.ximg exists
[Thu Jan 26 00:57:53 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0102642101_pi300-10000_cl_pass0_src13.csv
[Thu Jan 26 00:57:53 2012] fullrun_pn_xmm0102642101_pi300-10000_cl_pass0_src13_1.ximg exists
[Thu Jan 26 00:57:53 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0102642101_pi300-10000_cl_pass0_src13.csv
[Thu Jan 26 00:57:53 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0102642101_pi300-10000_cl_pass0_src13_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0102642101_pi300-10000_cl_pass0_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jan 26 00:57:53 2012] fullrun_pn_xmm0102642101_pi300-10000_cl_pass0_tfrozen_src13.ximg exists
[Thu Jan 26 00:57:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0102642101_pi300-10000_cl_pass0_tfrozen_src13.csv
[Thu Jan 26 00:57:53 2012] fullrun_pn_xmm0102642101_pi300-10000_cl_pass0_tfrozen_src13_1.ximg exists
[Thu Jan 26 00:57:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0102642101_pi300-10000_cl_pass0_tfrozen_src13.csv
[Thu Jan 26 00:57:53 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0102642101_pi300-10000_cl_pass0_tfrozen_src13_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0102642101_pi300-10000_cl_pass0_tfrozen_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jan 26 02:10:19 2012] Warning, spatial fit 13 centroid is now closest to src. 14
[Thu Jan 26 02:10:19 2012] Vigneting correction estimate = 1.000000
[Thu Jan 26 02:10:19 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jan 26 02:10:19 2012] Assessing source extent using major
[Thu Jan 26 02:10:19 2012] Source does appear to be extended
[Thu Jan 26 02:10:19 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jan 26 02:10:19 2012] Source is confused with source 14
[Thu Jan 26 02:10:33 2012] Using EEF radius (= 12.96 ")to estimate initial spatial extent for simple fitting
[Thu Jan 26 02:10:33 2012] Initial guess for spatial extent in simple fitting = 12.96"
[Thu Jan 26 02:10:33 2012] source mask rpix=3.0, npix_max = 48, mask sum = 26, frac = 0.537
[Thu Jan 26 02:10:33 2012] Giving source the simple spatial ID 11 for pass 1, mean size = 12.96"
[Thu Jan 26 08:48:08 2012] fullrun_pn_xmm0102642101_pi300-10000_cl_pass1_src11.ximg exists
[Thu Jan 26 08:48:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0102642101_pi300-10000_cl_pass1_src11.csv
[Thu Jan 26 08:48:08 2012] fullrun_pn_xmm0102642101_pi300-10000_cl_pass1_src11_1.ximg exists
[Thu Jan 26 08:48:09 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0102642101_pi300-10000_cl_pass1_src11.csv
[Thu Jan 26 08:48:09 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0102642101_pi300-10000_cl_pass1_src11_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0102642101_pi300-10000_cl_pass1_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jan 26 08:48:09 2012] fullrun_pn_xmm0102642101_pi300-10000_cl_pass1_tfrozen_src11.ximg exists
[Thu Jan 26 08:48:09 2012] fullrun_pn_xmm0102642101_pi300-10000_cl_pass1_tfrozen_src11_1.ximg exists
[Thu Jan 26 08:48:09 2012] Fit fullrun_pn_xmm0102642101_pi300-10000_cl_pass1_tfrozen_src11 appears to have run properly
[Thu Jan 26 09:28:10 2012] Warning: source 2 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 13 at 12.110596 pixels away
[Thu Jan 26 09:28:10 2012] Spatial fit model total counts = 5406.890000, observed total counts = 5407.000000
[Thu Jan 26 09:28:10 2012] Offset between fit and detection position for source 13 = 8.650719 pixels
[Thu Jan 26 09:28:10 2012] 495.832200 total counts/ 18.784200 bgd. counts: snr = 110.069179
Spatial fit parameters:
  Offset between fit and detection position for source 13 = 8.650719 pixels
  Position = (464.2, 388.5) = 1 33 44.77 30 39 45.4
  Extent = 25.9 (22.7-51.9)", rotation angle = 0
  Source counts = 477.0 +/- 22.3
  Background counts = 18.8
  Rate = 0.05 +/- 0.002
[Thu Jan 26 09:28:10 2012] Vigneting correction estimate = 1.000000
[Thu Jan 26 09:28:10 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jan 26 09:28:10 2012] Assessing source extent using major axis lower bound
[Thu Jan 26 09:28:10 2012] Source does appear to be extended
[Thu Jan 26 09:28:10 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jan 26 09:28:24 2012] XMMSAS src. selection expression = ellipse(40340.164000, 33751.388000, 1555.650045, 1555.650045, 0.000000, X, Y)
[Thu Jan 26 09:28:24 2012] Writing source region out to fullrun_pn_xmm0102642101_pi300-10000_pass1_cl_src13_src.reg
[Thu Jan 26 09:28:24 2012] Extracting stamp from image fullrun_pn_xmm0102642101_pi300-10000_cl_sm2.00.img.gz, (375, 299) - (554, 478)
[Thu Jan 26 09:28:24 2012] XMMSAS bgd. selection expression = annulus(40340.164000, 33751.388000, 2592.750075, 5185.500149, X, Y) && !ellipse(38863.362000, 33422.002000, 748.296822, 748.296822, 0.000000, X, Y) && !ellipse(40917.845367, 38309.401215, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(40525.290000, 37504.342000, 3660.992105, 3660.992105, 0.000000, X, Y) && !ellipse(40344.876000, 37012.894000, 1919.656055, 1919.656055, 0.000000, X, Y) && !ellipse(39681.116000, 35928.156000, 1693.344049, 1693.344049, 0.000000, X, Y) && !ellipse(39861.666000, 35964.560000, 2062.920059, 2062.920059, 0.000000, X, Y) && !ellipse(39899.036285, 32830.241150, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(39625.273560, 32377.773712, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38249.358000, 31746.722000, 1896.072055, 1896.072055, 0.000000, X, Y) && !ellipse(37775.486000, 31209.806000, 3084.112089, 980.984028, 119.911000, X, Y) && !ellipse(37452.364000, 30926.886000, 1542.056044, 1542.056044, 0.000000, X, Y) && !ellipse(37355.209800, 30655.276000, 1597.160046, 469.224814, 78.749000, X, Y) && !ellipse(36923.186600, 29194.161200, 1791.760052, 501.943214, 294.823000, X, Y) && !ellipse(34432.761078, 29089.188049, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36779.870697, 28735.429291, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36558.759200, 28500.872000, 1738.632050, 1738.632050, 0.000000, X, Y) && !ellipse(36300.866000, 28228.184000, 1776.864051, 1776.864051, 0.000000, X, Y)
[Thu Jan 26 09:28:24 2012] Writing fullrun_pn_xmm0102642101_pi300-10000_pass1_cl_src13.gif
[Thu Jan 26 09:38:59 2012] Mean detx,y = (8032.28, -10688.98) 
[Thu Jan 26 09:39:00 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Jan 26 09:39:37 2012] Binned source spectrum to 10 counts/bin
[Thu Jan 26 09:39:37 2012] Setting source spectrum file to fullrun_pn_xmm0102642101_pi300-10000_pass1_cl_src13_src_b10.pi.gz
[Thu Jan 26 09:39:37 2012] Setting bgd. spectrum file to fullrun_pn_xmm0102642101_pi300-10000_pass1_cl_src13_bgd.pi.gz
[Thu Jan 26 11:25:08 2012] Updating aperture counts using extracted products
[Thu Jan 26 11:25:08 2012] Error reading totcts from fullrun_pn_xmm0102642101_pi300-10000_pass1_cl_src13_src_b10.pi.gz
[Thu Jan 26 11:25:10 2012] Calculating source flux in energy range 0.30-8.00
[Thu Jan 26 11:25:10 2012] Using photon index=1.80, rate=0.0477, arf fullrun_pn_xmm0102642101_pi300-10000_pass1_cl_src13.arf
[Thu Jan 26 11:25:10 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jan 26 11:25:10 2012] Updating source flux to 2.9e-13
[Thu Jan 26 11:27:07 2012] Flag c found in src. 13 procflags, skipping spectral fitting