[Wed Jan 25 22:16:36 2012] Detection parameters: Position = (455.5, 405.9) = 1 33 47.71 30 41 3.6 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 48.5 +/- 11.8 Background counts = 13.9 Rate = 0.005 +/- 0.001 [Wed Jan 25 22:16:37 2012] Off-axis axis estimate = 13.80' [Wed Jan 25 22:18:30 2012] Using EEF radius (= 13.33 ")to estimate initial spatial extent for simple fitting [Wed Jan 25 22:18:30 2012] Initial guess for spatial extent in simple fitting = 13.33" [Wed Jan 25 22:18:30 2012] source mask rpix=3.1, npix_max = 50, mask sum = 49, frac = 0.965 [Wed Jan 25 22:18:30 2012] Giving source the simple spatial ID 11 for pass 0, mean size = 13.33" [Thu Jan 26 00:57:53 2012] fullrun_pn_xmm0102642101_pi300-10000_cl_pass0_src11.ximg exists [Thu Jan 26 00:57:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0102642101_pi300-10000_cl_pass0_src11.csv [Thu Jan 26 00:57:53 2012] fullrun_pn_xmm0102642101_pi300-10000_cl_pass0_src11_1.ximg exists [Thu Jan 26 00:57:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0102642101_pi300-10000_cl_pass0_src11.csv [Thu Jan 26 00:57:53 2012] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0102642101_pi300-10000_cl_pass0_src11_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0102642101_pi300-10000_cl_pass0_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Thu Jan 26 00:57:53 2012] fullrun_pn_xmm0102642101_pi300-10000_cl_pass0_tfrozen_src11.ximg exists [Thu Jan 26 00:57:53 2012] fullrun_pn_xmm0102642101_pi300-10000_cl_pass0_tfrozen_src11_1.ximg exists [Thu Jan 26 00:57:53 2012] Fit fullrun_pn_xmm0102642101_pi300-10000_cl_pass0_tfrozen_src11 appears to have run properly [Thu Jan 26 02:10:19 2012] Source 11 is offset by -2.168250 and 7.256982 pixels which is larger than 2 X fitted extent = 1.455830 x 1.455830, not incorporating fit results [Thu Jan 26 02:10:19 2012] Spatial fit model total counts = 412.799000, observed total counts = 414.000000 [Thu Jan 26 02:10:19 2012] Offset between fit and detection position for source 11 = 1.910158 pixels [Thu Jan 26 02:10:19 2012] Warning, changing simple spatial fit ID from 11 to 10 Spatial fit parameters: Offset between fit and detection position for source 11 = 1.910158 pixels Position = (453.6, 405.5) = 1 33 48.34 30 40 59.5 Extent = 27.1 (26.5-54.2)" x 22.6 (19.0-25.5)", rotation angle = 110 (85-137) degrees Source counts = 439.0 +/- 21.0 Background counts = 0.0 Rate = 0.04 +/- 0.002 Deleting source due to low signal-to-noise ratio