[Wed Jan 25 22:16:36 2012] Detection parameters:
  Position = (323.2, 323.5) = 1 34 32.32 30 34 46.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 135.3 +/- 26.8
  Background counts = 10.1
  Rate = 0.01 +/- 0.003

[Wed Jan 25 22:16:37 2012] Off-axis axis estimate = 2.56'
[Wed Jan 25 22:18:30 2012] Using EEF radius (= 7.71 ")to estimate initial spatial extent for simple fitting
[Wed Jan 25 22:18:30 2012] Initial guess for spatial extent in simple fitting = 7.71"
[Wed Jan 25 22:18:30 2012] source mask rpix=1.8, npix_max = 20, mask sum = 14, frac = 0.678
[Wed Jan 25 22:18:30 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.71"
[Thu Jan 26 00:57:52 2012] fullrun_pn_xmm0102642101_pi300-10000_cl_pass0_src1.ximg exists
[Thu Jan 26 00:57:52 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0102642101_pi300-10000_cl_pass0_src1.csv
[Thu Jan 26 00:57:52 2012] fullrun_pn_xmm0102642101_pi300-10000_cl_pass0_src1_1.ximg exists
[Thu Jan 26 00:57:52 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0102642101_pi300-10000_cl_pass0_src1.csv
[Thu Jan 26 00:57:52 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0102642101_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0102642101_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jan 26 00:57:53 2012] fullrun_pn_xmm0102642101_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Thu Jan 26 00:57:53 2012] fullrun_pn_xmm0102642101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Thu Jan 26 00:57:53 2012] Fit fullrun_pn_xmm0102642101_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Thu Jan 26 02:10:19 2012] Spatial fit model total counts = 120.534000, observed total counts = 122.000000
[Thu Jan 26 02:10:19 2012] Offset between fit and detection position for source 1 = 1.360246 pixels
[Thu Jan 26 02:10:19 2012] 119.687600 total counts/ 93.521500 bgd. counts: snr = 2.705723
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 1.360246 pixels
  Position = (324.3, 322.7) = 1 34 31.95 30 34 60.0
  Extent = 5.1 (4.0-7.3)", rotation angle = 0
  Source counts = 26.2 +/- 10.9
  Background counts = 93.5
  Rate = 0.003 +/- 0.001
[Thu Jan 26 02:10:19 2012] Vigneting correction estimate = 1.000000
[Thu Jan 26 02:10:19 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jan 26 02:10:19 2012] Assessing source extent using major axis lower bound
[Thu Jan 26 02:10:19 2012] Source does appear to be extended
[Thu Jan 26 02:10:19 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jan 26 02:10:33 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Jan 26 02:10:33 2012] Initial guess for spatial extent in simple fitting = 5.09"
[Thu Jan 26 02:10:33 2012] source mask rpix=1.2, npix_max = 11, mask sum = 4, frac = 0.358
[Thu Jan 26 02:10:33 2012] Skipping simple spatial due to low active detector fraction
[Thu Jan 26 09:28:10 2012] Vigneting correction estimate = 1.000000
[Thu Jan 26 09:28:10 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jan 26 09:28:10 2012] Assessing source extent using major axis lower bound
[Thu Jan 26 09:28:10 2012] Source does appear to be extended
[Thu Jan 26 09:28:10 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jan 26 09:28:23 2012] XMMSAS src. selection expression = ellipse(28166.849800, 28027.817200, 305.456409, 305.456409, 0.000000, X, Y)
[Thu Jan 26 09:28:23 2012] Writing source region out to fullrun_pn_xmm0102642101_pi300-10000_pass1_cl_src1_src.reg
[Thu Jan 26 09:28:23 2012] Extracting stamp from image fullrun_pn_xmm0102642101_pi300-10000_cl_sm2.00.img.gz, (307, 305) - (342, 340)
[Thu Jan 26 09:28:23 2012] XMMSAS bgd. selection expression = annulus(28166.849800, 28027.817200, 509.094015, 1018.188029, X, Y) && !ellipse(27107.311460, 27785.784800, 385.522411, 385.522411, 0.000000, X, Y)
[Thu Jan 26 09:28:23 2012] Writing fullrun_pn_xmm0102642101_pi300-10000_pass1_cl_src1.gif
[Thu Jan 26 09:28:31 2012] Mean detx,y = (176.82, -1370.46) 
[Thu Jan 26 09:28:34 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Jan 26 09:28:50 2012] Binned source spectrum to 10 counts/bin
[Thu Jan 26 09:28:50 2012] Setting source spectrum file to fullrun_pn_xmm0102642101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Thu Jan 26 09:28:50 2012] Setting bgd. spectrum file to fullrun_pn_xmm0102642101_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Thu Jan 26 09:55:08 2012] Not generating rmf since there are only 26 counts
[Thu Jan 26 09:55:08 2012] rmf not generated due to insufficient counts
[Thu Jan 26 11:25:07 2012] Updating aperture counts using extracted products
[Thu Jan 26 11:25:07 2012] Error reading totcts from fullrun_pn_xmm0102642101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Thu Jan 26 11:25:10 2012] Calculating source flux in energy range 0.30-8.00
[Thu Jan 26 11:25:10 2012] Using photon index=1.80, rate=0.00262, arf fullrun_pn_xmm0102642101_pi300-10000_pass1_cl_src1.arf
[Thu Jan 26 11:25:10 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jan 26 11:25:10 2012] Updating source flux to 1e-14
[Thu Jan 26 11:27:07 2012] Source 1 has fewer than 100.000000 counts, skipping spectral fitting
[Thu Jan 26 11:31:44 2012] xmm0102642101/analysis//spectral/fullrun_pn_xmm0102642101_pi300-10000_pass1_cl_src1_pl.csv not found, spectral fit skipped or did not complete