[Wed Jan 25 22:17:27 2012] Detection parameters:
  Position = (446.6, 386.1) = 1 33 50.73 30 39 35.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 11947.6 +/- 129.6
  Background counts = 5.3
  Rate = 1 +/- 0.01

[Wed Jan 25 22:17:27 2012] Off-axis axis estimate = 12.48'
[Thu Jan 26 01:22:53 2012] Using EEF radius (= 12.67 ")to estimate initial spatial extent for simple fitting
[Thu Jan 26 01:22:53 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Jan 26 01:22:53 2012] Initial guess for spatial extent in simple fitting = 12.67"
[Thu Jan 26 01:22:53 2012] source mask rpix=2.9, npix_max = 46, mask sum = 49, frac = 1.052
[Thu Jan 26 01:22:53 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 12.67"
[Thu Jan 26 02:10:09 2012] fullrun_mos2_xmm0102642101_pi300-10000_cl_pass0_src1.ximg exists
[Thu Jan 26 02:10:09 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0102642101_pi300-10000_cl_pass0_src1.csv
[Thu Jan 26 02:10:09 2012] fullrun_mos2_xmm0102642101_pi300-10000_cl_pass0_src1_1.ximg exists
[Thu Jan 26 02:10:09 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0102642101_pi300-10000_cl_pass0_src1.csv
[Thu Jan 26 02:10:09 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0102642101_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0102642101_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jan 26 02:10:09 2012] fullrun_mos2_xmm0102642101_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Thu Jan 26 02:10:09 2012] fullrun_mos2_xmm0102642101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Thu Jan 26 02:10:09 2012] Fit fullrun_mos2_xmm0102642101_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Thu Jan 26 02:10:26 2012] Spatial fit model total counts = 11299.100000, observed total counts = 11323.000000
[Thu Jan 26 02:10:26 2012] Offset between fit and detection position for source 4 = 0.423223 pixels
[Thu Jan 26 02:10:26 2012] 11267.080000 total counts/ 1885.360000 bgd. counts: snr = 216.065448
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 0.423223 pixels
  Position = (446.1, 386.2) = 1 33 50.88 30 39 35.5
  Extent = 7.6 (7.4-7.7)", rotation angle = 0
  Source counts = 9381.7 +/- 106.1
  Background counts = 1885.4
  Rate = 0.8 +/- 0.009
[Thu Jan 26 02:10:26 2012] Vigneting correction estimate = 1.000000
[Thu Jan 26 02:10:26 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jan 26 02:10:26 2012] Assessing source extent using major axis lower bound
[Thu Jan 26 02:10:26 2012] Source does appear to be extended
[Thu Jan 26 02:10:26 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jan 26 09:04:48 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Jan 26 09:04:48 2012] Initial guess for spatial extent in simple fitting = 7.58"
[Thu Jan 26 09:04:48 2012] source mask rpix=1.7, npix_max = 20, mask sum = 16, frac = 0.796
[Thu Jan 26 09:04:48 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 7.58"
[Thu Jan 26 09:28:02 2012] fullrun_mos2_xmm0102642101_pi300-10000_cl_pass1_src1.ximg exists
[Thu Jan 26 09:28:02 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0102642101_pi300-10000_cl_pass1_src1.csv
[Thu Jan 26 09:28:02 2012] fullrun_mos2_xmm0102642101_pi300-10000_cl_pass1_src1_1.ximg exists
[Thu Jan 26 09:28:02 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0102642101_pi300-10000_cl_pass1_src1.csv
[Thu Jan 26 09:28:02 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0102642101_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0102642101_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jan 26 09:28:02 2012] fullrun_mos2_xmm0102642101_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Thu Jan 26 09:28:02 2012] fullrun_mos2_xmm0102642101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Thu Jan 26 09:28:02 2012] Fit fullrun_mos2_xmm0102642101_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Thu Jan 26 09:28:15 2012] Spatial fit model total counts = 10690.700000, observed total counts = 10691.000000
[Thu Jan 26 09:28:15 2012] Offset between fit and detection position for source 4 = 0.033937 pixels
[Thu Jan 26 09:28:15 2012] 10663.830000 total counts/ 1976.190000 bgd. counts: snr = 195.428306
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 0.033937 pixels
  Position = (446.2, 386.2) = 1 33 50.86 30 39 35.5
  Extent = 6.8 (6.7-6.9)", rotation angle = 0
  Source counts = 8687.6 +/- 103.3
  Background counts = 1976.2
  Rate = 0.7 +/- 0.008
[Thu Jan 26 09:28:15 2012] Vigneting correction estimate = 1.000000
[Thu Jan 26 09:28:15 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jan 26 09:28:15 2012] Assessing source extent using major axis lower bound
[Thu Jan 26 09:28:15 2012] Source does appear to be extended
[Thu Jan 26 09:28:15 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jan 26 11:02:59 2012] Counts = 8687.640000, rescaling region sizes by 2.000000
[Thu Jan 26 11:02:59 2012] XMMSAS src. selection expression = ellipse(38768.691220, 33548.681800, 814.100423, 814.100423, 0.000000, X, Y)
[Thu Jan 26 11:02:59 2012] Writing source region out to fullrun_mos2_xmm0102642101_pi300-10000_pass1_cl_src4_src.reg
[Thu Jan 26 11:02:59 2012] Extracting stamp from image fullrun_mos2_xmm0102642101_pi300-10000_cl_sm2.00.img.gz, (399, 339) - (493, 433)
[Thu Jan 26 11:02:59 2012] XMMSAS bgd. selection expression = annulus(38768.691220, 33548.681800, 2713.668078, 5427.336156, X, Y) && !ellipse(33724.258880, 33722.659800, 612.452018, 612.452018, 0.000000, X, Y) && !ellipse(37210.441313, 30855.252176, 691.270420, 612.731041, 276.805769, X, Y) && !ellipse(39649.349365, 31982.073456, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(40001.269200, 31383.660000, 484.822414, 484.822414, 0.000000, X, Y) && !ellipse(37615.610199, 35342.976807, 870.000000, 870.000000, 0.000000, X, Y)
[Thu Jan 26 11:02:59 2012] Writing fullrun_mos2_xmm0102642101_pi300-10000_pass1_cl_src4.gif
[Thu Jan 26 11:03:03 2012] Mean detx,y = (-7517.71, 10511.33) 
[Thu Jan 26 11:03:06 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Jan 26 11:04:36 2012] Binned source spectrum to 10 counts/bin
[Thu Jan 26 11:04:37 2012] Setting source spectrum file to fullrun_mos2_xmm0102642101_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Thu Jan 26 11:04:37 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0102642101_pi300-10000_pass1_cl_src4_bgd.pi.gz
[Thu Jan 26 11:25:12 2012] Updating aperture counts using extracted products
[Thu Jan 26 11:25:12 2012] Error reading totcts from fullrun_mos2_xmm0102642101_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Thu Jan 26 11:25:13 2012] Calculating source flux in energy range 0.30-8.00
[Thu Jan 26 11:25:13 2012] Using photon index=1.80, rate=0.708, arf fullrun_mos2_xmm0102642101_pi300-10000_pass1_cl_src4.arf
[Thu Jan 26 11:25:13 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jan 26 11:25:13 2012] Updating source flux to 1.6e-11
[Thu Jan 26 11:27:07 2012] Reading fit data from xmm0102642101/analysis//spectral/fullrun_mos2_xmm0102642101_pi300-10000_pass1_cl_src4_pl.csv
[Thu Jan 26 11:27:07 2012] Spectral fit parameter nH value = 2.35612e+21
[Thu Jan 26 11:27:07 2012] Spectral fit parameter PhoIndex value = 2.168
[Thu Jan 26 11:27:07 2012] Failed to get F(0.3-8.0) from xmm0102642101/analysis//spectral/fullrun_mos2_xmm0102642101_pi300-10000_pass1_cl_src4_pl.csv, possibly due to different flux energy range selected
[Thu Jan 26 11:27:07 2012] Calculating source flux in energy range 0.30-8.00
[Thu Jan 26 11:27:07 2012] Using Nh = 2.4e+21, photon index=2.17, rate=0.708, arf fullrun_mos2_xmm0102642101_pi300-10000_pass1_cl_src4.arf
[Thu Jan 26 11:27:07 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jan 26 11:27:07 2012] Updating source flux to 1.6e-11