[Wed Jan 25 22:17:27 2012] Detection parameters:
  Position = (496.7, 283.9) = 1 33 33.93 30 32 9.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 906.4 +/- 36.5
  Background counts = 4.1
  Rate = 0.07 +/- 0.003

[Wed Jan 25 22:17:27 2012] Off-axis axis estimate = 14.41'
[Thu Jan 26 01:22:53 2012] Using EEF radius (= 13.63 ")to estimate initial spatial extent for simple fitting
[Thu Jan 26 01:22:53 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Jan 26 01:22:53 2012] Initial guess for spatial extent in simple fitting = 13.63"
[Thu Jan 26 01:22:53 2012] source mask rpix=3.1, npix_max = 52, mask sum = 56, frac = 1.060
[Thu Jan 26 01:22:53 2012] Giving source the simple spatial ID 3 for pass 0, mean size = 13.63"
[Thu Jan 26 02:10:09 2012] fullrun_mos2_xmm0102642101_pi300-10000_cl_pass0_src3.ximg exists
[Thu Jan 26 02:10:09 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0102642101_pi300-10000_cl_pass0_src3.csv
[Thu Jan 26 02:10:09 2012] fullrun_mos2_xmm0102642101_pi300-10000_cl_pass0_src3_1.ximg exists
[Thu Jan 26 02:10:09 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0102642101_pi300-10000_cl_pass0_src3.csv
[Thu Jan 26 02:10:09 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0102642101_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0102642101_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jan 26 02:10:09 2012] fullrun_mos2_xmm0102642101_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Thu Jan 26 02:10:09 2012] fullrun_mos2_xmm0102642101_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Thu Jan 26 02:10:09 2012] Fit fullrun_mos2_xmm0102642101_pi300-10000_cl_pass0_tfrozen_src3 appears to have run properly
[Thu Jan 26 02:10:26 2012] Spatial fit model total counts = 816.999000, observed total counts = 817.000000
[Thu Jan 26 02:10:26 2012] Offset between fit and detection position for source 2 = 0.351078 pixels
[Thu Jan 26 02:10:26 2012] 816.046000 total counts/ 216.921000 bgd. counts: snr = 40.678660
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.351078 pixels
  Position = (496.3, 283.7) = 1 33 34.04 30 32 9.4
  Extent = 5.8 (5.5-6.3)", rotation angle = 0
  Source counts = 599.1 +/- 28.6
  Background counts = 216.9
  Rate = 0.05 +/- 0.002
[Thu Jan 26 02:10:26 2012] Vigneting correction estimate = 1.000000
[Thu Jan 26 02:10:26 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jan 26 02:10:26 2012] Assessing source extent using major axis lower bound
[Thu Jan 26 02:10:26 2012] Source does appear to be extended
[Thu Jan 26 02:10:26 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jan 26 09:04:48 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Jan 26 09:04:48 2012] Initial guess for spatial extent in simple fitting = 5.81"
[Thu Jan 26 09:04:48 2012] source mask rpix=1.3, npix_max = 13, mask sum = 12, frac = 0.889
[Thu Jan 26 09:04:48 2012] Giving source the simple spatial ID 3 for pass 1, mean size = 5.81"
[Thu Jan 26 09:28:02 2012] fullrun_mos2_xmm0102642101_pi300-10000_cl_pass1_src3.ximg exists
[Thu Jan 26 09:28:02 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0102642101_pi300-10000_cl_pass1_src3.csv
[Thu Jan 26 09:28:02 2012] fullrun_mos2_xmm0102642101_pi300-10000_cl_pass1_src3_1.ximg exists
[Thu Jan 26 09:28:02 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0102642101_pi300-10000_cl_pass1_src3.csv
[Thu Jan 26 09:28:02 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0102642101_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0102642101_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jan 26 09:28:02 2012] fullrun_mos2_xmm0102642101_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Thu Jan 26 09:28:02 2012] fullrun_mos2_xmm0102642101_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Thu Jan 26 09:28:02 2012] Fit fullrun_mos2_xmm0102642101_pi300-10000_cl_pass1_tfrozen_src3 appears to have run properly
[Thu Jan 26 09:28:15 2012] Spatial fit model total counts = 790.989000, observed total counts = 791.000000
[Thu Jan 26 09:28:15 2012] Offset between fit and detection position for source 2 = 0.003449 pixels
[Thu Jan 26 09:28:15 2012] 796.457000 total counts/ 222.426000 bgd. counts: snr = 38.489527
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.003449 pixels
  Position = (496.3, 283.7) = 1 33 34.04 30 32 9.4
  Extent = 5.5 (5.2-6.0)", rotation angle = 0
  Source counts = 574.0 +/- 28.2
  Background counts = 222.4
  Rate = 0.05 +/- 0.002
[Thu Jan 26 09:28:15 2012] Vigneting correction estimate = 1.000000
[Thu Jan 26 09:28:15 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jan 26 09:28:15 2012] Assessing source extent using major axis lower bound
[Thu Jan 26 09:28:15 2012] Source does appear to be extended
[Thu Jan 26 09:28:15 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jan 26 11:02:59 2012] XMMSAS src. selection expression = ellipse(43133.206800, 24637.180200, 329.939409, 329.939409, 0.000000, X, Y)
[Thu Jan 26 11:02:59 2012] Writing source region out to fullrun_mos2_xmm0102642101_pi300-10000_pass1_cl_src2_src.reg
[Thu Jan 26 11:02:59 2012] Extracting stamp from image fullrun_mos2_xmm0102642101_pi300-10000_cl_sm2.00.img.gz, (477, 265) - (515, 303)
[Thu Jan 26 11:02:59 2012] XMMSAS bgd. selection expression = annulus(43133.206800, 24637.180200, 549.899016, 1099.798032, X, Y)
[Thu Jan 26 11:02:59 2012] Writing fullrun_mos2_xmm0102642101_pi300-10000_pass1_cl_src2.gif
[Thu Jan 26 11:05:42 2012] Mean detx,y = (-15093.38, 4102.20) 
[Thu Jan 26 11:05:44 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Jan 26 11:05:58 2012] Binned source spectrum to 10 counts/bin
[Thu Jan 26 11:05:58 2012] Setting source spectrum file to fullrun_mos2_xmm0102642101_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Thu Jan 26 11:05:58 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0102642101_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Thu Jan 26 11:25:12 2012] Updating aperture counts using extracted products
[Thu Jan 26 11:25:13 2012] Error reading totcts from fullrun_mos2_xmm0102642101_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Thu Jan 26 11:25:13 2012] Calculating source flux in energy range 0.30-8.00
[Thu Jan 26 11:25:13 2012] Using photon index=1.80, rate=0.0468, arf fullrun_mos2_xmm0102642101_pi300-10000_pass1_cl_src2.arf
[Thu Jan 26 11:25:13 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jan 26 11:25:13 2012] Updating source flux to 1.6e-12