[Wed Jan 25 22:17:27 2012] Detection parameters:
  Position = (432.9, 406.8) = 1 33 55.32 30 41 7.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 29.4 +/- 8.5
  Background counts = 4.9
  Rate = 0.002 +/- 0.0007

[Wed Jan 25 22:17:27 2012] Off-axis axis estimate = 12.52'
[Thu Jan 26 01:22:53 2012] Using EEF radius (= 12.69 ")to estimate initial spatial extent for simple fitting
[Thu Jan 26 01:22:53 2012] Initial guess for spatial extent in simple fitting = 12.69"
[Thu Jan 26 01:22:53 2012] source mask rpix=2.9, npix_max = 46, mask sum = 42, frac = 0.899
[Thu Jan 26 01:22:53 2012] Giving source the simple spatial ID 20 for pass 0, mean size = 12.69"
[Thu Jan 26 02:10:09 2012] fullrun_mos2_xmm0102642101_pi300-10000_cl_pass0_src20.ximg exists
[Thu Jan 26 02:10:09 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0102642101_pi300-10000_cl_pass0_src20.csv
[Thu Jan 26 02:10:09 2012] fullrun_mos2_xmm0102642101_pi300-10000_cl_pass0_src20_1.ximg exists
[Thu Jan 26 02:10:09 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0102642101_pi300-10000_cl_pass0_src20.csv
[Thu Jan 26 02:10:09 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0102642101_pi300-10000_cl_pass0_src20_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0102642101_pi300-10000_cl_pass0_src20.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jan 26 02:10:10 2012] fullrun_mos2_xmm0102642101_pi300-10000_cl_pass0_tfrozen_src20.ximg exists
[Thu Jan 26 02:10:10 2012] fullrun_mos2_xmm0102642101_pi300-10000_cl_pass0_tfrozen_src20_1.ximg exists
[Thu Jan 26 02:10:10 2012] Fit fullrun_mos2_xmm0102642101_pi300-10000_cl_pass0_tfrozen_src20 appears to have run properly
[Thu Jan 26 02:10:26 2012] Source 13 is offset by 5.790669 and -7.790198 pixels which is larger than
2 X fitted extent = 3.013959 x 3.013959, not incorporating fit results
[Thu Jan 26 02:10:26 2012] Vigneting correction estimate = 1.000000
[Thu Jan 26 02:10:26 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jan 26 02:10:26 2012] Assessing source extent using major
[Thu Jan 26 02:10:26 2012] Source does appear to be extended
[Thu Jan 26 02:10:26 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jan 26 09:04:48 2012] Using EEF radius (= 12.69 ")to estimate initial spatial extent for simple fitting
[Thu Jan 26 09:04:48 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Jan 26 09:04:48 2012] Initial guess for spatial extent in simple fitting = 12.69"
[Thu Jan 26 09:04:48 2012] source mask rpix=2.9, npix_max = 46, mask sum = 42, frac = 0.899
[Thu Jan 26 09:04:48 2012] Giving source the simple spatial ID 16 for pass 1, mean size = 12.69"
[Thu Jan 26 09:28:02 2012] fullrun_mos2_xmm0102642101_pi300-10000_cl_pass1_src16.ximg exists
[Thu Jan 26 09:28:02 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0102642101_pi300-10000_cl_pass1_src16.csv
[Thu Jan 26 09:28:02 2012] fullrun_mos2_xmm0102642101_pi300-10000_cl_pass1_src16_1.ximg exists
[Thu Jan 26 09:28:02 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0102642101_pi300-10000_cl_pass1_src16.csv
[Thu Jan 26 09:28:02 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0102642101_pi300-10000_cl_pass1_src16_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0102642101_pi300-10000_cl_pass1_src16.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jan 26 09:28:03 2012] fullrun_mos2_xmm0102642101_pi300-10000_cl_pass1_tfrozen_src16.ximg exists
[Thu Jan 26 09:28:03 2012] fullrun_mos2_xmm0102642101_pi300-10000_cl_pass1_tfrozen_src16_1.ximg exists
[Thu Jan 26 09:28:03 2012] Fit fullrun_mos2_xmm0102642101_pi300-10000_cl_pass1_tfrozen_src16 appears to have run properly
[Thu Jan 26 09:28:10 2012] Warning, spatial fit 8 centroid is now closest to src. 9
[Thu Jan 26 09:28:10 2012] Warning, spatial fit 23 centroid is now closest to src. 31
[Thu Jan 26 09:28:15 2012] Warning: source 16 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 13 at 15.709156 pixels away
[Thu Jan 26 09:28:15 2012] Vigneting correction estimate = 1.000000
[Thu Jan 26 09:28:15 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jan 26 09:28:15 2012] Assessing source extent using major
[Thu Jan 26 09:28:15 2012] Source does appear to be extended
[Thu Jan 26 09:28:15 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jan 26 11:02:59 2012] XMMSAS src. selection expression = ellipse(37615.610199, 35342.976807, 652.500000, 652.500000, 0.000000, X, Y)
[Thu Jan 26 11:02:59 2012] Writing source region out to fullrun_mos2_xmm0102642101_pi300-10000_pass1_cl_src13_src.reg
[Thu Jan 26 11:02:59 2012] Extracting stamp from image fullrun_mos2_xmm0102642101_pi300-10000_cl_sm2.00.img.gz, (395, 369) - (470, 444)
[Thu Jan 26 11:02:59 2012] XMMSAS bgd. selection expression = annulus(37615.610199, 35342.976807, 1087.500000, 2175.000000, X, Y) && !ellipse(38768.691220, 33548.681800, 542.733616, 542.733616, 0.000000, X, Y)
[Thu Jan 26 11:02:59 2012] Writing fullrun_mos2_xmm0102642101_pi300-10000_pass1_cl_src13.gif
[Thu Jan 26 11:09:36 2012] Mean detx,y = (-5820.00, 11551.30) 
[Thu Jan 26 11:09:39 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Jan 26 11:09:55 2012] Binned source spectrum to 10 counts/bin
[Thu Jan 26 11:09:55 2012] Setting source spectrum file to fullrun_mos2_xmm0102642101_pi300-10000_pass1_cl_src13_src_b10.pi.gz
[Thu Jan 26 11:09:55 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0102642101_pi300-10000_pass1_cl_src13_bgd.pi.gz
[Thu Jan 26 11:24:44 2012] Not generating rmf since there are only 29 counts
[Thu Jan 26 11:24:44 2012] rmf not generated due to insufficient counts
[Thu Jan 26 11:25:13 2012] Updating aperture counts using extracted products
[Thu Jan 26 11:25:13 2012] Error reading totcts from fullrun_mos2_xmm0102642101_pi300-10000_pass1_cl_src13_src_b10.pi.gz
[Thu Jan 26 11:25:14 2012] Calculating source flux in energy range 0.30-8.00
[Thu Jan 26 11:25:14 2012] Using photon index=1.80, rate=0.0024, arf fullrun_mos2_xmm0102642101_pi300-10000_pass1_cl_src13.arf
[Thu Jan 26 11:25:14 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jan 26 11:25:14 2012] Updating source flux to 5.6e-14
[Thu Jan 26 11:26:05 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting