[Sat Jan 28 10:12:24 2012] Detection parameters:
  Position = (480.1, 295.9) = 1 33 42.81 30 42 55.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 55.0 +/- 10.9
  Background counts = 12.5
  Rate = 0.006 +/- 0.001

[Sat Jan 28 10:12:26 2012] Off-axis axis estimate = 13.17'
[Sat Jan 28 10:14:39 2012] Using EEF radius (= 13.01 ")to estimate initial spatial extent for simple fitting
[Sat Jan 28 10:14:39 2012] Initial guess for spatial extent in simple fitting = 13.01"
[Sat Jan 28 10:14:39 2012] source mask rpix=3.0, npix_max = 48, mask sum = 49, frac = 1.005
[Sat Jan 28 10:14:39 2012] Giving source the simple spatial ID 5 for pass 0, mean size = 13.01"
[Sat Jan 28 11:38:46 2012] fullrun_pn_xmm0102642001_pi300-10000_cl_pass0_src5.ximg exists
[Sat Jan 28 11:38:46 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0102642001_pi300-10000_cl_pass0_src5.csv
[Sat Jan 28 11:38:46 2012] fullrun_pn_xmm0102642001_pi300-10000_cl_pass0_src5_1.ximg exists
[Sat Jan 28 11:38:46 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0102642001_pi300-10000_cl_pass0_src5.csv
[Sat Jan 28 11:38:46 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0102642001_pi300-10000_cl_pass0_src5_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0102642001_pi300-10000_cl_pass0_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jan 28 11:38:47 2012] fullrun_pn_xmm0102642001_pi300-10000_cl_pass0_tfrozen_src5.ximg exists
[Sat Jan 28 11:38:47 2012] fullrun_pn_xmm0102642001_pi300-10000_cl_pass0_tfrozen_src5_1.ximg exists
[Sat Jan 28 11:38:47 2012] Fit fullrun_pn_xmm0102642001_pi300-10000_cl_pass0_tfrozen_src5 appears to have run properly
[Sat Jan 28 12:36:47 2012] Warning, spatial fit 5 centroid is now closest to src. 22
[Sat Jan 28 12:36:47 2012] Spatial fit model total counts = 274.879000, observed total counts = 275.000000
[Sat Jan 28 12:36:47 2012] Offset between fit and detection position for source 5 = 1.815047 pixels
[Sat Jan 28 12:36:47 2012] Warning, changing simple spatial fit ID from 5 to 22
[Sat Jan 28 12:36:47 2012] 262.061200 total counts/ 224.816000 bgd. counts: snr = 2.484029
Spatial fit parameters:
  Offset between fit and detection position for source 5 = 1.815047 pixels
  Position = (479.3, 294.3) = 1 33 43.06 30 42 51.0
  Extent = 6.9 (5.1-10.9)", rotation angle = 0
  Source counts = 37.2 +/- 16.2
  Background counts = 224.8
  Rate = 0.004 +/- 0.002
[Sat Jan 28 12:36:47 2012] Vigneting correction estimate = 1.000000
[Sat Jan 28 12:36:47 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jan 28 12:36:47 2012] Assessing source extent using major axis lower bound
[Sat Jan 28 12:36:47 2012] Source does appear to be extended
[Sat Jan 28 12:36:47 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jan 28 12:36:47 2012] Source is confused with source 22
[Sat Jan 28 12:37:01 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Jan 28 12:37:01 2012] Initial guess for spatial extent in simple fitting = 6.93"
[Sat Jan 28 12:37:01 2012] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.913
[Sat Jan 28 12:37:01 2012] Giving source the simple spatial ID 5 for pass 1, mean size = 6.93"
[Sat Jan 28 14:15:32 2012] fullrun_pn_xmm0102642001_pi300-10000_cl_pass1_src5.ximg exists
[Sat Jan 28 14:15:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0102642001_pi300-10000_cl_pass1_src5.csv
[Sat Jan 28 14:15:32 2012] fullrun_pn_xmm0102642001_pi300-10000_cl_pass1_src5_1.ximg exists
[Sat Jan 28 14:15:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0102642001_pi300-10000_cl_pass1_src5.csv
[Sat Jan 28 14:15:32 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0102642001_pi300-10000_cl_pass1_src5_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0102642001_pi300-10000_cl_pass1_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jan 28 14:15:32 2012] fullrun_pn_xmm0102642001_pi300-10000_cl_pass1_tfrozen_src5.ximg exists
[Sat Jan 28 14:15:32 2012] fullrun_pn_xmm0102642001_pi300-10000_cl_pass1_tfrozen_src5_1.ximg exists
[Sat Jan 28 14:15:32 2012] Fit fullrun_pn_xmm0102642001_pi300-10000_cl_pass1_tfrozen_src5 appears to have run properly
[Sat Jan 28 15:07:06 2012] Warning, spatial fit 5 centroid is now closest to src. 4
[Sat Jan 28 15:07:06 2012] Vigneting correction estimate = 1.000000
[Sat Jan 28 15:07:06 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jan 28 15:07:06 2012] Assessing source extent using major axis lower bound
[Sat Jan 28 15:07:06 2012] Source does appear to be extended
[Sat Jan 28 15:07:06 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jan 28 15:07:20 2012] XMMSAS src. selection expression = ellipse(41652.980000, 25551.938000, 415.857012, 415.857012, 0.000000, X, Y)
[Sat Jan 28 15:07:20 2012] Writing source region out to fullrun_pn_xmm0102642001_pi300-10000_pass1_cl_src5_src.reg
[Sat Jan 28 15:07:20 2012] Extracting stamp from image fullrun_pn_xmm0102642001_pi300-10000_cl_sm2.00.img.gz, (455, 270) - (503, 318)
[Sat Jan 28 15:07:20 2012] XMMSAS bgd. selection expression = annulus(41652.980000, 25551.938000, 693.095020, 1386.190040, X, Y) && !ellipse(42710.608200, 27714.934000, 1690.776049, 1690.776049, 0.000000, X, Y) && !ellipse(42010.546000, 26227.146000, 3592.416103, 3592.416103, 0.000000, X, Y) && !ellipse(41384.380000, 24970.862000, 1805.296052, 1805.296052, 0.000000, X, Y) && !ellipse(41184.386000, 24273.962000, 2025.640058, 2025.640058, 0.000000, X, Y) && !ellipse(40670.704000, 23850.334000, 2041.824059, 2041.824059, 0.000000, X, Y)
[Sat Jan 28 15:07:20 2012] Writing fullrun_pn_xmm0102642001_pi300-10000_pass1_cl_src5.gif
[Sat Jan 28 15:11:57 2012] Mean detx,y = (-15242.60, 8347.79) 
[Sat Jan 28 15:11:58 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Jan 28 15:12:13 2012] Binned source spectrum to 10 counts/bin
[Sat Jan 28 15:12:13 2012] Setting source spectrum file to fullrun_pn_xmm0102642001_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Sat Jan 28 15:12:13 2012] Setting bgd. spectrum file to fullrun_pn_xmm0102642001_pi300-10000_pass1_cl_src5_bgd.pi.gz
[Sat Jan 28 15:39:11 2012] Not generating rmf since there are only 37 counts
[Sat Jan 28 15:39:11 2012] rmf not generated due to insufficient counts
[Sat Jan 28 16:36:27 2012] Updating aperture counts using extracted products
[Sat Jan 28 16:36:27 2012] Error reading totcts from fullrun_pn_xmm0102642001_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Sat Jan 28 16:36:28 2012] Calculating source flux in energy range 0.30-8.00
[Sat Jan 28 16:36:28 2012] Using photon index=1.80, rate=0.00422, arf fullrun_pn_xmm0102642001_pi300-10000_pass1_cl_src5.arf
[Sat Jan 28 16:36:28 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jan 28 16:36:28 2012] Updating source flux to 4.5e-14
[Sat Jan 28 16:37:13 2012] Flag c found in src. 5 procflags, skipping spectral fitting
[Sat Jan 28 16:37:13 2012] Source 5 has fewer than 100.000000 counts, skipping spectral fitting