[Sat Jan 28 10:12:25 2012] Detection parameters:
  Position = (468.3, 272.3) = 1 33 46.78 30 41 16.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 45.9 +/- 11.1
  Background counts = 14.0
  Rate = 0.005 +/- 0.001

[Sat Jan 28 10:12:26 2012] Off-axis axis estimate = 12.46'
[Sat Jan 28 10:14:39 2012] Using EEF radius (= 12.66 ")to estimate initial spatial extent for simple fitting
[Sat Jan 28 10:14:39 2012] Initial guess for spatial extent in simple fitting = 12.66"
[Sat Jan 28 10:14:39 2012] source mask rpix=2.9, npix_max = 46, mask sum = 49, frac = 1.053
[Sat Jan 28 10:14:39 2012] Giving source the simple spatial ID 25 for pass 0, mean size = 12.66"
[Sat Jan 28 11:38:46 2012] fullrun_pn_xmm0102642001_pi300-10000_cl_pass0_src25.ximg exists
[Sat Jan 28 11:38:46 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0102642001_pi300-10000_cl_pass0_src25.csv
[Sat Jan 28 11:38:46 2012] fullrun_pn_xmm0102642001_pi300-10000_cl_pass0_src25_1.ximg exists
[Sat Jan 28 11:38:46 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0102642001_pi300-10000_cl_pass0_src25.csv
[Sat Jan 28 11:38:46 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0102642001_pi300-10000_cl_pass0_src25_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0102642001_pi300-10000_cl_pass0_src25.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jan 28 11:38:47 2012] fullrun_pn_xmm0102642001_pi300-10000_cl_pass0_tfrozen_src25.ximg exists
[Sat Jan 28 11:38:47 2012] fullrun_pn_xmm0102642001_pi300-10000_cl_pass0_tfrozen_src25_1.ximg exists
[Sat Jan 28 11:38:47 2012] Fit fullrun_pn_xmm0102642001_pi300-10000_cl_pass0_tfrozen_src25 appears to have run properly
[Sat Jan 28 12:36:47 2012] Warning: source 25 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 25 at 10.722883 pixels away
[Sat Jan 28 12:36:47 2012] Vigneting correction estimate = 1.000000
[Sat Jan 28 12:36:47 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jan 28 12:36:47 2012] Assessing source extent using major
[Sat Jan 28 12:36:47 2012] Source does appear to be extended
[Sat Jan 28 12:36:47 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jan 28 12:37:01 2012] Using EEF radius (= 12.66 ")to estimate initial spatial extent for simple fitting
[Sat Jan 28 12:37:01 2012] Initial guess for spatial extent in simple fitting = 12.66"
[Sat Jan 28 12:37:01 2012] source mask rpix=2.9, npix_max = 46, mask sum = 49, frac = 1.053
[Sat Jan 28 12:37:01 2012] Giving source the simple spatial ID 22 for pass 1, mean size = 12.66"
[Sat Jan 28 14:15:32 2012] fullrun_pn_xmm0102642001_pi300-10000_cl_pass1_src22.ximg exists
[Sat Jan 28 14:15:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0102642001_pi300-10000_cl_pass1_src22.csv
[Sat Jan 28 14:15:32 2012] fullrun_pn_xmm0102642001_pi300-10000_cl_pass1_src22_1.ximg exists
[Sat Jan 28 14:15:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0102642001_pi300-10000_cl_pass1_src22.csv
[Sat Jan 28 14:15:32 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0102642001_pi300-10000_cl_pass1_src22_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0102642001_pi300-10000_cl_pass1_src22.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jan 28 14:15:32 2012] fullrun_pn_xmm0102642001_pi300-10000_cl_pass1_tfrozen_src22.ximg exists
[Sat Jan 28 14:15:32 2012] fullrun_pn_xmm0102642001_pi300-10000_cl_pass1_tfrozen_src22_1.ximg exists
[Sat Jan 28 14:15:33 2012] Fit fullrun_pn_xmm0102642001_pi300-10000_cl_pass1_tfrozen_src22 appears to have run properly
[Sat Jan 28 15:07:06 2012] Warning: source 1 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 25 at 11.458841 pixels away
[Sat Jan 28 15:07:06 2012] Spatial fit model total counts = 307.093000, observed total counts = 309.000000
[Sat Jan 28 15:07:06 2012] Offset between fit and detection position for source 25 = 2.415062 pixels
[Sat Jan 28 15:07:06 2012] Warning, changing simple spatial fit ID from 22 to 21
[Sat Jan 28 15:07:06 2012] 320.482000 total counts/ 123.515000 bgd. counts: snr = 17.722852
Spatial fit parameters:
  Offset between fit and detection position for source 25 = 2.415062 pixels
  Position = (468.0, 274.7) = 1 33 46.89 30 41 26.1
  Extent = 25.5 (24.3-51.0)", rotation angle = 0
  Source counts = 197.0 +/- 17.9
  Background counts = 123.5
  Rate = 0.02 +/- 0.002
[Sat Jan 28 15:07:06 2012] Vigneting correction estimate = 1.000000
[Sat Jan 28 15:07:06 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jan 28 15:07:06 2012] Assessing source extent using major axis lower bound
[Sat Jan 28 15:07:06 2012] Source does appear to be extended
[Sat Jan 28 15:07:06 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jan 28 15:07:06 2012] Source is confused with source 22
[Sat Jan 28 15:07:06 2012] Source is confused with source 24
[Sat Jan 28 15:07:20 2012] XMMSAS src. selection expression = ellipse(40670.704000, 23850.334000, 1531.368044, 1531.368044, 0.000000, X, Y)
[Sat Jan 28 15:07:20 2012] Writing source region out to fullrun_pn_xmm0102642001_pi300-10000_pass1_cl_src25_src.reg
[Sat Jan 28 15:07:20 2012] Extracting stamp from image fullrun_pn_xmm0102642001_pi300-10000_cl_sm2.00.img.gz, (380, 187) - (556, 363)
[Sat Jan 28 15:07:20 2012] XMMSAS bgd. selection expression = annulus(40670.704000, 23850.334000, 2552.280073, 5104.560147, X, Y) && !ellipse(39579.118000, 21466.062000, 749.144822, 749.144822, 0.000000, X, Y) && !ellipse(42710.608200, 27714.934000, 1690.776049, 1690.776049, 0.000000, X, Y) && !ellipse(42010.546000, 26227.146000, 3592.416103, 3592.416103, 0.000000, X, Y) && !ellipse(41652.980000, 25551.938000, 554.476016, 554.476016, 0.000000, X, Y) && !ellipse(39084.044000, 20238.642000, 2089.928060, 2089.928060, 0.000000, X, Y) && !ellipse(37655.314000, 17818.268000, 1191.608034, 1191.608034, 0.000000, X, Y) && !ellipse(41384.380000, 24970.862000, 1805.296052, 1805.296052, 0.000000, X, Y) && !ellipse(41184.386000, 24273.962000, 2025.640058, 2025.640058, 0.000000, X, Y) && !ellipse(38475.174000, 19221.320000, 1563.776045, 1563.776045, 0.000000, X, Y) && !ellipse(37901.142000, 18676.102000, 1973.392057, 1973.392057, 0.000000, X, Y)
[Sat Jan 28 15:07:20 2012] Writing fullrun_pn_xmm0102642001_pi300-10000_pass1_cl_src25.gif
[Sat Jan 28 15:22:01 2012] Mean detx,y = (-15082.67, 5901.47) 
[Sat Jan 28 15:22:03 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Jan 28 15:22:40 2012] Binned source spectrum to 10 counts/bin
[Sat Jan 28 15:22:40 2012] Setting source spectrum file to fullrun_pn_xmm0102642001_pi300-10000_pass1_cl_src25_src_b10.pi.gz
[Sat Jan 28 15:22:40 2012] Setting bgd. spectrum file to fullrun_pn_xmm0102642001_pi300-10000_pass1_cl_src25_bgd.pi.gz
[Sat Jan 28 16:36:27 2012] Updating aperture counts using extracted products
[Sat Jan 28 16:36:27 2012] Error reading totcts from fullrun_pn_xmm0102642001_pi300-10000_pass1_cl_src25_src_b10.pi.gz
[Sat Jan 28 16:36:28 2012] Calculating source flux in energy range 0.30-8.00
[Sat Jan 28 16:36:28 2012] Using photon index=1.80, rate=0.0223, arf fullrun_pn_xmm0102642001_pi300-10000_pass1_cl_src25.arf
[Sat Jan 28 16:36:28 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jan 28 16:36:28 2012] Updating source flux to 1.6e-13
[Sat Jan 28 16:37:13 2012] Flag c found in src. 25 procflags, skipping spectral fitting