[Sat Jan 28 10:12:25 2012] Detection parameters:
  Position = (397.5, 287.7) = 1 34 10.68 30 42 22.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 45.6 +/- 9.1
  Background counts = 8.8
  Rate = 0.005 +/- 0.001

[Sat Jan 28 10:12:26 2012] Off-axis axis estimate = 7.22'
[Sat Jan 28 10:14:39 2012] Using EEF radius (= 10.04 ")to estimate initial spatial extent for simple fitting
[Sat Jan 28 10:14:39 2012] Initial guess for spatial extent in simple fitting = 10.04"
[Sat Jan 28 10:14:39 2012] source mask rpix=2.3, npix_max = 31, mask sum = 25, frac = 0.793
[Sat Jan 28 10:14:39 2012] Giving source the simple spatial ID 23 for pass 0, mean size = 10.04"
[Sat Jan 28 11:38:46 2012] fullrun_pn_xmm0102642001_pi300-10000_cl_pass0_src23.ximg exists
[Sat Jan 28 11:38:46 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0102642001_pi300-10000_cl_pass0_src23.csv
[Sat Jan 28 11:38:46 2012] fullrun_pn_xmm0102642001_pi300-10000_cl_pass0_src23_1.ximg exists
[Sat Jan 28 11:38:46 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0102642001_pi300-10000_cl_pass0_src23.csv
[Sat Jan 28 11:38:46 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0102642001_pi300-10000_cl_pass0_src23_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0102642001_pi300-10000_cl_pass0_src23.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jan 28 11:38:47 2012] fullrun_pn_xmm0102642001_pi300-10000_cl_pass0_tfrozen_src23.ximg exists
[Sat Jan 28 11:38:47 2012] fullrun_pn_xmm0102642001_pi300-10000_cl_pass0_tfrozen_src23_1.ximg exists
[Sat Jan 28 11:38:47 2012] Fit fullrun_pn_xmm0102642001_pi300-10000_cl_pass0_tfrozen_src23 appears to have run properly
[Sat Jan 28 12:36:47 2012] Warning: source 23 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 23 at 12.508196 pixels away
[Sat Jan 28 12:36:47 2012] Vigneting correction estimate = 1.000000
[Sat Jan 28 12:36:47 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jan 28 12:36:47 2012] Assessing source extent using major
[Sat Jan 28 12:36:47 2012] Source does appear to be extended
[Sat Jan 28 12:36:47 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jan 28 12:37:01 2012] Using EEF radius (= 10.04 ")to estimate initial spatial extent for simple fitting
[Sat Jan 28 12:37:01 2012] Initial guess for spatial extent in simple fitting = 10.04"
[Sat Jan 28 12:37:01 2012] source mask rpix=2.3, npix_max = 31, mask sum = 25, frac = 0.793
[Sat Jan 28 12:37:01 2012] Giving source the simple spatial ID 20 for pass 1, mean size = 10.04"
[Sat Jan 28 14:15:32 2012] fullrun_pn_xmm0102642001_pi300-10000_cl_pass1_src20.ximg exists
[Sat Jan 28 14:15:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0102642001_pi300-10000_cl_pass1_src20.csv
[Sat Jan 28 14:15:32 2012] fullrun_pn_xmm0102642001_pi300-10000_cl_pass1_src20_1.ximg exists
[Sat Jan 28 14:15:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0102642001_pi300-10000_cl_pass1_src20.csv
[Sat Jan 28 14:15:32 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0102642001_pi300-10000_cl_pass1_src20_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0102642001_pi300-10000_cl_pass1_src20.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jan 28 14:15:32 2012] fullrun_pn_xmm0102642001_pi300-10000_cl_pass1_tfrozen_src20.ximg exists
[Sat Jan 28 14:15:32 2012] fullrun_pn_xmm0102642001_pi300-10000_cl_pass1_tfrozen_src20_1.ximg exists
[Sat Jan 28 14:15:32 2012] Fit fullrun_pn_xmm0102642001_pi300-10000_cl_pass1_tfrozen_src20 appears to have run properly
[Sat Jan 28 15:07:06 2012] Spatial fit model total counts = 126.837000, observed total counts = 128.000000
[Sat Jan 28 15:07:06 2012] Offset between fit and detection position for source 23 = 0.195848 pixels
[Sat Jan 28 15:07:06 2012] 128.020500 total counts/ 103.254000 bgd. counts: snr = 2.437312
Spatial fit parameters:
  Offset between fit and detection position for source 23 = 0.195848 pixels
  Position = (397.3, 287.7) = 1 34 10.75 30 42 23.3
  Extent = 3.9 (2.8-6.0)", rotation angle = 0
  Source counts = 24.8 +/- 11.3
  Background counts = 103.3
  Rate = 0.003 +/- 0.001
[Sat Jan 28 15:07:06 2012] Vigneting correction estimate = 1.000000
[Sat Jan 28 15:07:06 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jan 28 15:07:06 2012] Assessing source extent using major axis lower bound
[Sat Jan 28 15:07:06 2012] Source does appear to be extended
[Sat Jan 28 15:07:06 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jan 28 15:07:20 2012] XMMSAS src. selection expression = ellipse(34513.495600, 24984.223800, 234.876607, 234.876607, 0.000000, X, Y)
[Sat Jan 28 15:07:20 2012] Writing source region out to fullrun_pn_xmm0102642001_pi300-10000_pass1_cl_src23_src.reg
[Sat Jan 28 15:07:20 2012] Extracting stamp from image fullrun_pn_xmm0102642001_pi300-10000_cl_sm2.00.img.gz, (384, 274) - (411, 301)
[Sat Jan 28 15:07:20 2012] XMMSAS bgd. selection expression = annulus(34513.495600, 24984.223800, 391.461011, 782.922023, X, Y)
[Sat Jan 28 15:07:20 2012] Writing fullrun_pn_xmm0102642001_pi300-10000_pass1_cl_src23.gif
[Sat Jan 28 15:20:51 2012] Mean detx,y = (-9135.72, 4570.78) 
[Sat Jan 28 15:20:53 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Jan 28 15:21:05 2012] Binned source spectrum to 10 counts/bin
[Sat Jan 28 15:21:05 2012] Setting source spectrum file to fullrun_pn_xmm0102642001_pi300-10000_pass1_cl_src23_src_b10.pi.gz
[Sat Jan 28 15:21:05 2012] Setting bgd. spectrum file to fullrun_pn_xmm0102642001_pi300-10000_pass1_cl_src23_bgd.pi.gz
[Sat Jan 28 15:52:54 2012] Not generating rmf since there are only 24 counts
[Sat Jan 28 15:52:54 2012] rmf not generated due to insufficient counts
[Sat Jan 28 16:36:27 2012] Updating aperture counts using extracted products
[Sat Jan 28 16:36:27 2012] Error reading totcts from fullrun_pn_xmm0102642001_pi300-10000_pass1_cl_src23_src_b10.pi.gz
[Sat Jan 28 16:36:28 2012] Calculating source flux in energy range 0.30-8.00
[Sat Jan 28 16:36:28 2012] Using photon index=1.80, rate=0.00281, arf fullrun_pn_xmm0102642001_pi300-10000_pass1_cl_src23.arf
[Sat Jan 28 16:36:28 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jan 28 16:36:28 2012] Updating source flux to 2e-14
[Sat Jan 28 16:37:13 2012] Source 23 has fewer than 100.000000 counts, skipping spectral fitting