[Sat Jan 28 10:12:24 2012] Detection parameters:
  Position = (456.4, 247.0) = 1 33 50.82 30 39 35.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 11346.8 +/- 150.3
  Background counts = 14.4
  Rate = 1 +/- 0.02

[Sat Jan 28 10:12:26 2012] Off-axis axis estimate = 12.05'
[Sat Jan 28 10:14:39 2012] Using EEF radius (= 12.45 ")to estimate initial spatial extent for simple fitting
[Sat Jan 28 10:14:39 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Jan 28 10:14:39 2012] Initial guess for spatial extent in simple fitting = 12.45"
[Sat Jan 28 10:14:39 2012] source mask rpix=2.9, npix_max = 45, mask sum = 40, frac = 0.885
[Sat Jan 28 10:14:39 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 12.45"
[Sat Jan 28 11:38:46 2012] fullrun_pn_xmm0102642001_pi300-10000_cl_pass0_src1.ximg exists
[Sat Jan 28 11:38:46 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0102642001_pi300-10000_cl_pass0_src1.csv
[Sat Jan 28 11:38:46 2012] fullrun_pn_xmm0102642001_pi300-10000_cl_pass0_src1_1.ximg exists
[Sat Jan 28 11:38:46 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0102642001_pi300-10000_cl_pass0_src1.csv
[Sat Jan 28 11:38:46 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0102642001_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0102642001_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jan 28 11:38:47 2012] fullrun_pn_xmm0102642001_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Sat Jan 28 11:38:47 2012] fullrun_pn_xmm0102642001_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Sat Jan 28 11:38:47 2012] Fit fullrun_pn_xmm0102642001_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Sat Jan 28 12:36:47 2012] Spatial fit model total counts = 11231.500000, observed total counts = 11242.000000
[Sat Jan 28 12:36:47 2012] Offset between fit and detection position for source 1 = 2.088883 pixels
[Sat Jan 28 12:36:47 2012] 11248.070000 total counts/ 1840.130000 bgd. counts: snr = 219.315985
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 2.088883 pixels
  Position = (455.9, 249.0) = 1 33 50.99 30 39 34.5
  Extent = 12.4 (12.2-12.7)", rotation angle = 0
  Source counts = 9407.9 +/- 106.1
  Background counts = 1840.1
  Rate = 1 +/- 0.01
[Sat Jan 28 12:36:47 2012] Vigneting correction estimate = 1.000000
[Sat Jan 28 12:36:47 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jan 28 12:36:47 2012] Assessing source extent using major axis lower bound
[Sat Jan 28 12:36:47 2012] Source does appear to be extended
[Sat Jan 28 12:36:47 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jan 28 12:36:47 2012] Source is confused with source 6
[Sat Jan 28 12:37:01 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Jan 28 12:37:01 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Jan 28 12:37:01 2012] Initial guess for spatial extent in simple fitting = 12.43"
[Sat Jan 28 12:37:01 2012] source mask rpix=2.9, npix_max = 45, mask sum = 31, frac = 0.687
[Sat Jan 28 12:37:01 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 12.43"
[Sat Jan 28 14:15:32 2012] fullrun_pn_xmm0102642001_pi300-10000_cl_pass1_src1.ximg exists
[Sat Jan 28 14:15:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0102642001_pi300-10000_cl_pass1_src1.csv
[Sat Jan 28 14:15:32 2012] fullrun_pn_xmm0102642001_pi300-10000_cl_pass1_src1_1.ximg exists
[Sat Jan 28 14:15:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0102642001_pi300-10000_cl_pass1_src1.csv
[Sat Jan 28 14:15:32 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0102642001_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0102642001_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jan 28 14:15:32 2012] fullrun_pn_xmm0102642001_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Sat Jan 28 14:15:32 2012] fullrun_pn_xmm0102642001_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Sat Jan 28 14:15:32 2012] Fit fullrun_pn_xmm0102642001_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Sat Jan 28 15:07:06 2012] Warning, spatial fit 1 centroid is now closest to src. 25
[Sat Jan 28 15:07:06 2012] Spatial fit model total counts = 8439.170000, observed total counts = 8453.000000
[Sat Jan 28 15:07:06 2012] Offset between fit and detection position for source 1 = 1.775990 pixels
[Sat Jan 28 15:07:06 2012] Warning, changing simple spatial fit ID from 1 to 6
[Sat Jan 28 15:07:06 2012] 8479.500000 total counts/ 1903.680000 bgd. counts: snr = 150.713773
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 1.775990 pixels
  Position = (455.5, 247.3) = 1 33 51.13 30 39 27.0
  Extent = 9.4 (9.2-9.5)", rotation angle = 0
  Source counts = 6575.8 +/- 92.1
  Background counts = 1903.7
  Rate = 0.7 +/- 0.01
[Sat Jan 28 15:07:06 2012] Vigneting correction estimate = 1.000000
[Sat Jan 28 15:07:06 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jan 28 15:07:06 2012] Assessing source extent using major axis lower bound
[Sat Jan 28 15:07:06 2012] Source does appear to be extended
[Sat Jan 28 15:07:06 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jan 28 15:07:20 2012] Counts = 6575.820000, rescaling region sizes by 2.000000
[Sat Jan 28 15:07:20 2012] XMMSAS src. selection expression = ellipse(39579.118000, 21466.062000, 1123.717232, 1123.717232, 0.000000, X, Y)
[Sat Jan 28 15:07:20 2012] Writing source region out to fullrun_pn_xmm0102642001_pi300-10000_pass1_cl_src1_src.reg
[Sat Jan 28 15:07:20 2012] Extracting stamp from image fullrun_pn_xmm0102642001_pi300-10000_cl_sm2.00.img.gz, (391, 183) - (520, 312)
[Sat Jan 28 15:07:20 2012] XMMSAS bgd. selection expression = annulus(39579.118000, 21466.062000, 3745.724108, 7491.448216, X, Y) && !ellipse(42710.608200, 27714.934000, 1690.776049, 1690.776049, 0.000000, X, Y) && !ellipse(42010.546000, 26227.146000, 3592.416103, 3592.416103, 0.000000, X, Y) && !ellipse(41652.980000, 25551.938000, 554.476016, 554.476016, 0.000000, X, Y) && !ellipse(39084.044000, 20238.642000, 2089.928060, 2089.928060, 0.000000, X, Y) && !ellipse(37655.314000, 17818.268000, 1191.608034, 1191.608034, 0.000000, X, Y) && !ellipse(41384.380000, 24970.862000, 1805.296052, 1805.296052, 0.000000, X, Y) && !ellipse(34513.495600, 24984.223800, 313.168809, 313.168809, 0.000000, X, Y) && !ellipse(41184.386000, 24273.962000, 2025.640058, 2025.640058, 0.000000, X, Y) && !ellipse(40670.704000, 23850.334000, 2041.824059, 2041.824059, 0.000000, X, Y) && !ellipse(34597.117620, 21818.082400, 519.296015, 519.296015, 0.000000, X, Y) && !ellipse(38475.174000, 19221.320000, 1563.776045, 1563.776045, 0.000000, X, Y) && !ellipse(37901.142000, 18676.102000, 1973.392057, 1973.392057, 0.000000, X, Y)
[Sat Jan 28 15:07:20 2012] Writing fullrun_pn_xmm0102642001_pi300-10000_pass1_cl_src1.gif
[Sat Jan 28 15:07:27 2012] Mean detx,y = (-15216.41, 3878.82) 
[Sat Jan 28 15:07:29 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Jan 28 15:08:26 2012] Binned source spectrum to 10 counts/bin
[Sat Jan 28 15:08:27 2012] Setting source spectrum file to fullrun_pn_xmm0102642001_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sat Jan 28 15:08:27 2012] Setting bgd. spectrum file to fullrun_pn_xmm0102642001_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Sat Jan 28 16:36:27 2012] Updating aperture counts using extracted products
[Sat Jan 28 16:36:27 2012] Error reading totcts from fullrun_pn_xmm0102642001_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sat Jan 28 16:36:27 2012] Calculating source flux in energy range 0.30-8.00
[Sat Jan 28 16:36:27 2012] Using photon index=1.80, rate=0.746, arf fullrun_pn_xmm0102642001_pi300-10000_pass1_cl_src1.arf
[Sat Jan 28 16:36:27 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jan 28 16:36:27 2012] Updating source flux to 5.4e-12
[Sat Jan 28 16:37:13 2012] Flag c found in src. 1 procflags, skipping spectral fitting
[Sat Jan 28 16:38:35 2012] Reading fit data from xmm0102642001/analysis//spectral/fullrun_pn_xmm0102642001_pi300-10000_pass1_cl_src1_pl.csv
[Sat Jan 28 16:38:35 2012] Spectral fit parameter nH value = 2.3079e+21
[Sat Jan 28 16:38:35 2012] Spectral fit parameter PhoIndex value = 2.28324
[Sat Jan 28 16:38:35 2012] Failed to get F(0.3-8.0) from xmm0102642001/analysis//spectral/fullrun_pn_xmm0102642001_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Sat Jan 28 16:38:35 2012] Calculating source flux in energy range 0.30-8.00
[Sat Jan 28 16:38:35 2012] Using Nh = 2.3e+21, photon index=2.28, rate=0.746, arf fullrun_pn_xmm0102642001_pi300-10000_pass1_cl_src1.arf
[Sat Jan 28 16:38:35 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jan 28 16:38:35 2012] Updating source flux to 6.1e-12