[Sat Jan 28 10:12:52 2012] Detection parameters:
  Position = (297.5, 469.4) = 1 34 44.40 30 55 34.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 22.6 +/- 6.7
  Background counts = 2.5
  Rate = 0.002 +/- 0.0006

[Sat Jan 28 10:12:53 2012] Off-axis axis estimate = 12.39'
[Sat Jan 28 11:38:47 2012] Using EEF radius (= 12.63 ")to estimate initial spatial extent for simple fitting
[Sat Jan 28 11:38:47 2012] Initial guess for spatial extent in simple fitting = 12.63"
[Sat Jan 28 11:38:47 2012] source mask rpix=2.9, npix_max = 46, mask sum = 49, frac = 1.058
[Sat Jan 28 11:38:47 2012] Giving source the simple spatial ID 18 for pass 0, mean size = 12.63"
[Sat Jan 28 12:08:55 2012] fullrun_mos1_xmm0102642001_pi300-10000_cl_pass0_src18.ximg exists
[Sat Jan 28 12:08:55 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0102642001_pi300-10000_cl_pass0_src18.csv
[Sat Jan 28 12:08:55 2012] fullrun_mos1_xmm0102642001_pi300-10000_cl_pass0_src18_1.ximg exists
[Sat Jan 28 12:08:55 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0102642001_pi300-10000_cl_pass0_src18.csv
[Sat Jan 28 12:08:55 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0102642001_pi300-10000_cl_pass0_src18_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0102642001_pi300-10000_cl_pass0_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jan 28 12:08:56 2012] fullrun_mos1_xmm0102642001_pi300-10000_cl_pass0_tfrozen_src18.ximg exists
[Sat Jan 28 12:08:56 2012] fullrun_mos1_xmm0102642001_pi300-10000_cl_pass0_tfrozen_src18_1.ximg exists
[Sat Jan 28 12:08:56 2012] Fit fullrun_mos1_xmm0102642001_pi300-10000_cl_pass0_tfrozen_src18 appears to have run properly
[Sat Jan 28 12:36:50 2012] Spatial fit model total counts = 49.773100, observed total counts = 50.000000
[Sat Jan 28 12:36:50 2012] Offset between fit and detection position for source 5 = 1.315028 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 5 = 1.315028 pixels
  Position = (297.2, 470.7) = 1 34 44.51 30 55 39.3
  Extent = 17.4 (13.2-20.2)", rotation angle = 0
  Source counts = 49.0 +/- 7.0
  Background counts = 0.0
  Rate = 0.004 +/- 0.0006
 Deleting source due to low signal-to-noise ratio