[Fri Jun  1 23:06:31 2012] Detection parameters:
  Position = (195.7, 289.9) = 1 34 32.94 30 57 53.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 124.7 +/- 15.3
  Background counts = 25.1
  Rate = 0.01 +/- 0.002

[Fri Jun  1 23:06:31 2012] Off-axis axis estimate = 7.47'
[Fri Jun  1 23:17:02 2012] Using EEF radius (= 10.16 ")to estimate initial spatial extent for simple fitting
[Fri Jun  1 23:17:02 2012] Initial guess for spatial extent in simple fitting = 10.16"
[Fri Jun  1 23:17:02 2012] source mask rpix=2.3, npix_max = 32, mask sum = 36, frac = 1.118
[Fri Jun  1 23:17:02 2012] Giving source the simple spatial ID 5 for pass 0, mean size = 10.16"
[Fri Jun  1 23:22:51 2012] fullrun_mos1_xmm0102640901_pi300-10000_cl_pass0_src5.ximg exists
[Fri Jun  1 23:22:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0102640901_pi300-10000_cl_pass0_src5.csv
[Fri Jun  1 23:22:51 2012] fullrun_mos1_xmm0102640901_pi300-10000_cl_pass0_src5_1.ximg exists
[Fri Jun  1 23:22:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0102640901_pi300-10000_cl_pass0_src5.csv
[Fri Jun  1 23:22:51 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0102640901_pi300-10000_cl_pass0_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0102640901_pi300-10000_cl_pass0_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun  1 23:22:51 2012] fullrun_mos1_xmm0102640901_pi300-10000_cl_pass0_tfrozen_src5.ximg exists
[Fri Jun  1 23:22:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0102640901_pi300-10000_cl_pass0_tfrozen_src5.csv
[Fri Jun  1 23:22:51 2012] fullrun_mos1_xmm0102640901_pi300-10000_cl_pass0_tfrozen_src5_1.ximg exists
[Fri Jun  1 23:22:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0102640901_pi300-10000_cl_pass0_tfrozen_src5.csv
[Fri Jun  1 23:22:51 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0102640901_pi300-10000_cl_pass0_tfrozen_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0102640901_pi300-10000_cl_pass0_tfrozen_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun  1 23:29:52 2012] Warning: source 5 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 5 at 13.582038 pixels away
[Fri Jun  1 23:29:52 2012] Vigneting correction estimate = 1.000000
[Fri Jun  1 23:29:52 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun  1 23:29:52 2012] Assessing source extent using major
[Fri Jun  1 23:29:52 2012] Source does appear to be extended
[Fri Jun  1 23:29:52 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun  1 23:38:58 2012] Using EEF radius (= 10.16 ")to estimate initial spatial extent for simple fitting
[Fri Jun  1 23:38:58 2012] Initial guess for spatial extent in simple fitting = 10.16"
[Fri Jun  1 23:38:58 2012] source mask rpix=2.3, npix_max = 32, mask sum = 36, frac = 1.118
[Fri Jun  1 23:38:58 2012] Giving source the simple spatial ID 5 for pass 1, mean size = 10.16"
[Fri Jun  1 23:46:19 2012] fullrun_mos1_xmm0102640901_pi300-10000_cl_pass1_src5.ximg exists
[Fri Jun  1 23:46:19 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0102640901_pi300-10000_cl_pass1_src5.csv
[Fri Jun  1 23:46:19 2012] fullrun_mos1_xmm0102640901_pi300-10000_cl_pass1_src5_1.ximg exists
[Fri Jun  1 23:46:19 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0102640901_pi300-10000_cl_pass1_src5.csv
[Fri Jun  1 23:46:19 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0102640901_pi300-10000_cl_pass1_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0102640901_pi300-10000_cl_pass1_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun  1 23:46:19 2012] fullrun_mos1_xmm0102640901_pi300-10000_cl_pass1_tfrozen_src5.ximg exists
[Fri Jun  1 23:46:19 2012] fullrun_mos1_xmm0102640901_pi300-10000_cl_pass1_tfrozen_src5_1.ximg exists
[Fri Jun  1 23:46:19 2012] Fit fullrun_mos1_xmm0102640901_pi300-10000_cl_pass1_tfrozen_src5 appears to have run properly
[Fri Jun  1 23:53:43 2012] Spatial fit model total counts = 154.897000, observed total counts = 145.000000
[Fri Jun  1 23:53:43 2012] Offset between fit and detection position for source 5 = 0.188472 pixels
[Fri Jun  1 23:53:43 2012] 155.783200 total counts/ 77.123100 bgd. counts: snr = 8.956993
Spatial fit parameters:
  Offset between fit and detection position for source 5 = 0.188472 pixels
  Position = (195.8, 289.7) = 1 34 32.90 30 57 52.4
  Extent = 7.4 (5.8-9.6)", rotation angle = 0
  Source counts = 78.7 +/- 12.5
  Background counts = 77.1
  Rate = 0.009 +/- 0.001
[Fri Jun  1 23:53:43 2012] Vigneting correction estimate = 1.000000
[Fri Jun  1 23:53:43 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun  1 23:53:43 2012] Assessing source extent using major axis lower bound
[Fri Jun  1 23:53:43 2012] Source does appear to be extended
[Fri Jun  1 23:53:43 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun  2 00:03:16 2012] XMMSAS src. selection expression = ellipse(16990.420200, 25155.965000, 445.063213, 445.063213, 0.000000, X, Y)
[Sat Jun  2 00:03:16 2012] Writing source region out to fullrun_mos1_xmm0102640901_pi300-10000_pass1_cl_src5_src.reg
[Sat Jun  2 00:03:16 2012] Extracting stamp from image fullrun_mos1_xmm0102640901_pi300-10000_cl_sm2.00.img.gz, (170, 264) - (221, 315)
[Sat Jun  2 00:03:16 2012] XMMSAS bgd. selection expression = annulus(16990.420200, 25155.965000, 741.772021, 1483.544043, X, Y)
[Sat Jun  2 00:03:16 2012] Writing fullrun_mos1_xmm0102640901_pi300-10000_pass1_cl_src5.gif
[Sat Jun  2 00:04:44 2012] Mean detx,y = (1530.89, 7087.94) 
[Sat Jun  2 00:04:45 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Jun  2 00:05:04 2012] Binned source spectrum to 10 counts/bin
[Sat Jun  2 00:05:04 2012] Setting source spectrum file to fullrun_mos1_xmm0102640901_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Sat Jun  2 00:05:04 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0102640901_pi300-10000_pass1_cl_src5_bgd.pi.gz
[Sat Jun  2 00:09:00 2012] Not generating rmf since there are only 78 counts
[Sat Jun  2 00:09:00 2012] rmf not generated due to insufficient counts
[Sat Jun  2 00:15:39 2012] Updating aperture counts using extracted products
[Sat Jun  2 00:15:39 2012] Error reading totcts from fullrun_mos1_xmm0102640901_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Sat Jun  2 00:15:39 2012] Calculating source flux in energy range 0.30-8.00
[Sat Jun  2 00:15:39 2012] Using photon index=1.80, rate=0.00942, arf fullrun_mos1_xmm0102640901_pi300-10000_pass1_cl_src5.arf
[Sat Jun  2 00:15:39 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jun  2 00:15:39 2012] Updating source flux to 1.2e-13
[Sat Jun  2 00:15:40 2012] Source 5 has fewer than 100.000000 counts, skipping spectral fitting