[Sun Aug  5 15:25:58 2012] Detection parameters:
  Position = (308.0, 346.3) = 1 34 0.98 30 31 36.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 75.5 +/- 11.8
  Background counts = 12.0
  Rate = 0.01 +/- 0.002

[Sun Aug  5 15:25:58 2012] Off-axis axis estimate = 3.54'
[Sun Aug  5 15:27:35 2012] Using EEF radius (= 8.20 ")to estimate initial spatial extent for simple fitting
[Sun Aug  5 15:27:35 2012] Initial guess for spatial extent in simple fitting = 8.20"
[Sun Aug  5 15:27:35 2012] source mask rpix=1.9, npix_max = 22, mask sum = 20, frac = 0.879
[Sun Aug  5 15:27:35 2012] Giving source the simple spatial ID 7 for pass 0, mean size = 8.20"
[Sun Aug  5 15:42:58 2012] fullrun_pn_xmm0102640701_pi300-10000_cl_pass0_src7.ximg exists
[Sun Aug  5 15:42:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0102640701_pi300-10000_cl_pass0_src7.csv
[Sun Aug  5 15:42:58 2012] fullrun_pn_xmm0102640701_pi300-10000_cl_pass0_src7_1.ximg exists
[Sun Aug  5 15:42:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0102640701_pi300-10000_cl_pass0_src7.csv
[Sun Aug  5 15:42:58 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0102640701_pi300-10000_cl_pass0_src7_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0102640701_pi300-10000_cl_pass0_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Aug  5 15:42:58 2012] fullrun_pn_xmm0102640701_pi300-10000_cl_pass0_tfrozen_src7.ximg exists
[Sun Aug  5 15:42:58 2012] fullrun_pn_xmm0102640701_pi300-10000_cl_pass0_tfrozen_src7_1.ximg exists
[Sun Aug  5 15:42:58 2012] Fit fullrun_pn_xmm0102640701_pi300-10000_cl_pass0_tfrozen_src7 appears to have run properly
[Sun Aug  5 17:16:01 2012] Warning: source 7 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 10 at 10.947427 pixels away
[Sun Aug  5 17:16:01 2012] Vigneting correction estimate = 1.000000
[Sun Aug  5 17:16:01 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Aug  5 17:16:01 2012] Assessing source extent using major
[Sun Aug  5 17:16:01 2012] Source does appear to be extended
[Sun Aug  5 17:16:01 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Aug  5 17:16:24 2012] Using EEF radius (= 8.20 ")to estimate initial spatial extent for simple fitting
[Sun Aug  5 17:16:24 2012] Initial guess for spatial extent in simple fitting = 8.20"
[Sun Aug  5 17:16:24 2012] source mask rpix=1.9, npix_max = 22, mask sum = 20, frac = 0.879
[Sun Aug  5 17:16:24 2012] Giving source the simple spatial ID 7 for pass 1, mean size = 8.20"
[Sun Aug  5 17:32:28 2012] fullrun_pn_xmm0102640701_pi300-10000_cl_pass1_src7.ximg exists
[Sun Aug  5 17:32:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0102640701_pi300-10000_cl_pass1_src7.csv
[Sun Aug  5 17:32:28 2012] fullrun_pn_xmm0102640701_pi300-10000_cl_pass1_src7_1.ximg exists
[Sun Aug  5 17:32:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0102640701_pi300-10000_cl_pass1_src7.csv
[Sun Aug  5 17:32:28 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0102640701_pi300-10000_cl_pass1_src7_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0102640701_pi300-10000_cl_pass1_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Aug  5 17:32:28 2012] fullrun_pn_xmm0102640701_pi300-10000_cl_pass1_tfrozen_src7.ximg exists
[Sun Aug  5 17:32:28 2012] fullrun_pn_xmm0102640701_pi300-10000_cl_pass1_tfrozen_src7_1.ximg exists
[Sun Aug  5 17:32:28 2012] Fit fullrun_pn_xmm0102640701_pi300-10000_cl_pass1_tfrozen_src7 appears to have run properly
[Sun Aug  5 18:42:39 2012] Spatial fit model total counts = 155.998000, observed total counts = 156.000000
[Sun Aug  5 18:42:39 2012] Offset between fit and detection position for source 10 = 0.657844 pixels
[Sun Aug  5 18:42:39 2012] 157.741100 total counts/ 110.558000 bgd. counts: snr = 4.487365
Spatial fit parameters:
  Offset between fit and detection position for source 10 = 0.657844 pixels
  Position = (307.4, 346.3) = 1 34 1.21 30 31 36.1
  Extent = 6.6 (4.4-8.9)", rotation angle = 0
  Source counts = 47.2 +/- 12.6
  Background counts = 110.6
  Rate = 0.007 +/- 0.002
[Sun Aug  5 18:42:39 2012] Vigneting correction estimate = 1.000000
[Sun Aug  5 18:42:39 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Aug  5 18:42:39 2012] Assessing source extent using major axis lower bound
[Sun Aug  5 18:42:39 2012] Source does appear to be extended
[Sun Aug  5 18:42:39 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Aug  5 18:42:51 2012] XMMSAS src. selection expression = ellipse(26694.397800, 30076.974200, 393.334811, 393.334811, 0.000000, X, Y)
[Sun Aug  5 18:42:51 2012] Writing source region out to fullrun_pn_xmm0102640701_pi300-10000_pass1_cl_src10_src.reg
[Sun Aug  5 18:42:51 2012] Extracting stamp from image fullrun_pn_xmm0102640701_pi300-10000_cl_sm2.00.img.gz, (285, 324) - (330, 369)
[Sun Aug  5 18:42:51 2012] XMMSAS bgd. selection expression = annulus(26694.397800, 30076.974200, 655.558019, 1311.116038, X, Y) && !ellipse(28392.787140, 32021.030701, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26487.276868, 28199.320284, 689.800180, 430.601959, 72.426240, X, Y)
[Sun Aug  5 18:42:51 2012] Writing fullrun_pn_xmm0102640701_pi300-10000_pass1_cl_src10.gif
[Sun Aug  5 18:49:59 2012] Mean detx,y = (-848.71, 5719.03) 
[Sun Aug  5 18:50:01 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Aug  5 18:50:12 2012] Binned source spectrum to 10 counts/bin
[Sun Aug  5 18:50:13 2012] Setting source spectrum file to fullrun_pn_xmm0102640701_pi300-10000_pass1_cl_src10_src_b10.pi.gz
[Sun Aug  5 18:50:13 2012] Setting bgd. spectrum file to fullrun_pn_xmm0102640701_pi300-10000_pass1_cl_src10_bgd.pi.gz
[Sun Aug  5 18:57:01 2012] Not generating rmf since there are only 47 counts
[Sun Aug  5 18:57:01 2012] rmf not generated due to insufficient counts
[Sun Aug  5 19:31:37 2012] Updating aperture counts using extracted products
[Sun Aug  5 19:31:37 2012] Error reading totcts from fullrun_pn_xmm0102640701_pi300-10000_pass1_cl_src10_src_b10.pi.gz
[Sun Aug  5 19:31:37 2012] Calculating source flux in energy range 0.30-8.00
[Sun Aug  5 19:31:37 2012] Using photon index=1.80, rate=0.00685, arf fullrun_pn_xmm0102640701_pi300-10000_pass1_cl_src10.arf
[Sun Aug  5 19:31:37 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Aug  5 19:31:37 2012] Updating source flux to 2.6e-14
[Sun Aug  5 19:32:20 2012] Source 10 has fewer than 100.000000 counts, skipping spectral fitting