[Sun Aug  5 15:26:50 2012] Detection parameters:
  Position = (339.2, 456.9) = 1 33 50.49 30 39 38.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 8624.6 +/- 110.8
  Background counts = 6.5
  Rate = 0.7 +/- 0.009

[Sun Aug  5 15:26:50 2012] Off-axis axis estimate = 11.86'
[Sun Aug  5 16:20:09 2012] Using EEF radius (= 12.36 ")to estimate initial spatial extent for simple fitting
[Sun Aug  5 16:20:09 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun Aug  5 16:20:09 2012] Initial guess for spatial extent in simple fitting = 12.36"
[Sun Aug  5 16:20:09 2012] source mask rpix=2.8, npix_max = 44, mask sum = 42, frac = 0.940
[Sun Aug  5 16:20:09 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 12.36"
[Sun Aug  5 17:15:54 2012] fullrun_mos2_xmm0102640701_pi300-10000_cl_pass0_src1.ximg exists
[Sun Aug  5 17:15:54 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0102640701_pi300-10000_cl_pass0_src1.csv
[Sun Aug  5 17:15:54 2012] fullrun_mos2_xmm0102640701_pi300-10000_cl_pass0_src1_1.ximg exists
[Sun Aug  5 17:15:54 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0102640701_pi300-10000_cl_pass0_src1.csv
[Sun Aug  5 17:15:54 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0102640701_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0102640701_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Aug  5 17:15:54 2012] fullrun_mos2_xmm0102640701_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Sun Aug  5 17:15:54 2012] fullrun_mos2_xmm0102640701_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Sun Aug  5 17:15:54 2012] Fit fullrun_mos2_xmm0102640701_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Sun Aug  5 17:16:12 2012] Spatial fit model total counts = 8036.100000, observed total counts = 8049.000000
[Sun Aug  5 17:16:12 2012] Offset between fit and detection position for source 5 = 0.308731 pixels
[Sun Aug  5 17:16:12 2012] 7870.730000 total counts/ 1061.520000 bgd. counts: snr = 208.993432
Spatial fit parameters:
  Offset between fit and detection position for source 5 = 0.308731 pixels
  Position = (338.9, 456.8) = 1 33 50.58 30 39 36.8
  Extent = 8.3 (8.3-8.4)", rotation angle = 0
  Source counts = 6809.2 +/- 88.7
  Background counts = 1061.5
  Rate = 0.6 +/- 0.008
[Sun Aug  5 17:16:12 2012] Vigneting correction estimate = 1.000000
[Sun Aug  5 17:16:12 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Aug  5 17:16:12 2012] Assessing source extent using major axis lower bound
[Sun Aug  5 17:16:12 2012] Source does appear to be extended
[Sun Aug  5 17:16:12 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Aug  5 17:49:44 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Aug  5 17:49:44 2012] Initial guess for spatial extent in simple fitting = 8.35"
[Sun Aug  5 17:49:44 2012] source mask rpix=1.9, npix_max = 23, mask sum = 25, frac = 1.069
[Sun Aug  5 17:49:44 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 8.35"
[Sun Aug  5 18:42:36 2012] fullrun_mos2_xmm0102640701_pi300-10000_cl_pass1_src1.ximg exists
[Sun Aug  5 18:42:36 2012] fullrun_mos2_xmm0102640701_pi300-10000_cl_pass1_src1_1.ximg exists
[Sun Aug  5 18:42:36 2012] Fit fullrun_mos2_xmm0102640701_pi300-10000_cl_pass1_src1 appears to have run properly
[Sun Aug  5 18:42:36 2012] fullrun_mos2_xmm0102640701_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Sun Aug  5 18:42:36 2012] fullrun_mos2_xmm0102640701_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Sun Aug  5 18:42:36 2012] Fit fullrun_mos2_xmm0102640701_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Sun Aug  5 18:42:44 2012] Spatial fit model total counts = 7589.910000, observed total counts = 7602.000000
[Sun Aug  5 18:42:44 2012] Offset between fit and detection position for source 5 = 0.032832 pixels
[Sun Aug  5 18:42:44 2012] 7279.110000 total counts/ 859.500000 bgd. counts: snr = 218.970548
Spatial fit parameters:
  Offset between fit and detection position for source 5 = 0.032832 pixels
  Position = (338.9, 456.8) = 1 33 50.58 30 39 37.0
  Extent = 7.5 (7.5-7.5)", rotation angle = 0
  Source counts = 6419.6 +/- 85.3
  Background counts = 859.5
  Rate = 0.6 +/- 0.007
[Sun Aug  5 18:42:44 2012] Vigneting correction estimate = 1.000000
[Sun Aug  5 18:42:44 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Aug  5 18:42:44 2012] Assessing source extent using major axis lower bound
[Sun Aug  5 18:42:44 2012] Source does appear to be extended
[Sun Aug  5 18:42:44 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Aug  5 19:16:44 2012] Counts = 6419.610000, rescaling region sizes by 2.000000
[Sun Aug  5 19:16:44 2012] XMMSAS src. selection expression = ellipse(29434.934400, 39695.913600, 898.683626, 898.683626, 0.000000, X, Y)
[Sun Aug  5 19:16:44 2012] Writing source region out to fullrun_mos2_xmm0102640701_pi300-10000_pass1_cl_src5_src.reg
[Sun Aug  5 19:16:44 2012] Extracting stamp from image fullrun_mos2_xmm0102640701_pi300-10000_cl_sm2.00.img.gz, (287, 405) - (391, 508)
[Sun Aug  5 19:16:44 2012] XMMSAS bgd. selection expression = annulus(29434.934400, 39695.913600, 2995.612086, 5991.224172, X, Y) && !ellipse(28383.661804, 40126.970551, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31738.493800, 38705.668800, 374.356011, 374.356011, 0.000000, X, Y) && !ellipse(24350.011800, 39871.966320, 330.767472, 330.767472, 0.000000, X, Y) && !ellipse(30494.152557, 40044.749603, 870.000000, 870.000000, 0.000000, X, Y)
[Sun Aug  5 19:16:44 2012] Writing fullrun_mos2_xmm0102640701_pi300-10000_pass1_cl_src5.gif
[Sun Aug  5 19:16:47 2012] Mean detx,y = (1260.66, -15845.04) 
[Sun Aug  5 19:16:48 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Aug  5 19:17:32 2012] Binned source spectrum to 10 counts/bin
[Sun Aug  5 19:17:32 2012] Setting source spectrum file to fullrun_mos2_xmm0102640701_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Sun Aug  5 19:17:32 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0102640701_pi300-10000_pass1_cl_src5_bgd.pi.gz
[Sun Aug  5 19:31:37 2012] Updating aperture counts using extracted products
[Sun Aug  5 19:31:37 2012] Error reading totcts from fullrun_mos2_xmm0102640701_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Sun Aug  5 19:31:38 2012] Calculating source flux in energy range 0.30-8.00
[Sun Aug  5 19:31:38 2012] Using photon index=1.80, rate=0.556, arf fullrun_mos2_xmm0102640701_pi300-10000_pass1_cl_src5.arf
[Sun Aug  5 19:31:38 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Aug  5 19:31:38 2012] Updating source flux to 1.4e-11
[Sun Aug  5 19:32:20 2012] Reading fit data from xmm0102640701/analysis//spectral/fullrun_mos2_xmm0102640701_pi300-10000_pass1_cl_src5_pl.csv
[Sun Aug  5 19:32:20 2012] Spectral fit parameter nH value = 2.00666e+21
[Sun Aug  5 19:32:20 2012] Spectral fit parameter PhoIndex value = 2.19629
[Sun Aug  5 19:32:20 2012] Failed to get F(0.3-8.0) from xmm0102640701/analysis//spectral/fullrun_mos2_xmm0102640701_pi300-10000_pass1_cl_src5_pl.csv, possibly due to different flux energy range selected
[Sun Aug  5 19:32:20 2012] Calculating source flux in energy range 0.30-8.00
[Sun Aug  5 19:32:20 2012] Using Nh = 2e+21, photon index=2.20, rate=0.556, arf fullrun_mos2_xmm0102640701_pi300-10000_pass1_cl_src5.arf
[Sun Aug  5 19:32:20 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Aug  5 19:32:20 2012] Updating source flux to 1.4e-11