[Sun Aug  5 15:26:50 2012] Detection parameters:
  Position = (326.5, 368.5) = 1 33 54.77 30 33 15.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 48.7 +/- 9.0
  Background counts = 4.7
  Rate = 0.007 +/- 0.001

[Sun Aug  5 15:26:50 2012] Off-axis axis estimate = 5.47'
[Sun Aug  5 16:20:09 2012] Using EEF radius (= 9.16 ")to estimate initial spatial extent for simple fitting
[Sun Aug  5 16:20:09 2012] Initial guess for spatial extent in simple fitting = 9.16"
[Sun Aug  5 16:20:09 2012] source mask rpix=2.1, npix_max = 27, mask sum = 22, frac = 0.809
[Sun Aug  5 16:20:09 2012] Giving source the simple spatial ID 7 for pass 0, mean size = 9.16"
[Sun Aug  5 17:15:54 2012] fullrun_mos2_xmm0102640701_pi300-10000_cl_pass0_src7.ximg exists
[Sun Aug  5 17:15:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0102640701_pi300-10000_cl_pass0_src7.csv
[Sun Aug  5 17:15:54 2012] fullrun_mos2_xmm0102640701_pi300-10000_cl_pass0_src7_1.ximg exists
[Sun Aug  5 17:15:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0102640701_pi300-10000_cl_pass0_src7.csv
[Sun Aug  5 17:15:54 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0102640701_pi300-10000_cl_pass0_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0102640701_pi300-10000_cl_pass0_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Aug  5 17:15:54 2012] fullrun_mos2_xmm0102640701_pi300-10000_cl_pass0_tfrozen_src7.ximg exists
[Sun Aug  5 17:15:54 2012] fullrun_mos2_xmm0102640701_pi300-10000_cl_pass0_tfrozen_src7_1.ximg exists
[Sun Aug  5 17:15:54 2012] Fit fullrun_mos2_xmm0102640701_pi300-10000_cl_pass0_tfrozen_src7 appears to have run properly
[Sun Aug  5 17:16:12 2012] Warning: source 7 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 11 at 11.916838 pixels away
[Sun Aug  5 17:16:12 2012] Vigneting correction estimate = 1.000000
[Sun Aug  5 17:16:12 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Aug  5 17:16:12 2012] Assessing source extent using major
[Sun Aug  5 17:16:12 2012] Source does appear to be extended
[Sun Aug  5 17:16:12 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Aug  5 17:49:44 2012] Using EEF radius (= 9.16 ")to estimate initial spatial extent for simple fitting
[Sun Aug  5 17:49:44 2012] Initial guess for spatial extent in simple fitting = 9.16"
[Sun Aug  5 17:49:44 2012] source mask rpix=2.1, npix_max = 27, mask sum = 22, frac = 0.809
[Sun Aug  5 17:49:44 2012] Giving source the simple spatial ID 7 for pass 1, mean size = 9.16"
[Sun Aug  5 18:42:36 2012] fullrun_mos2_xmm0102640701_pi300-10000_cl_pass1_src7.ximg exists
[Sun Aug  5 18:42:36 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0102640701_pi300-10000_cl_pass1_src7.csv
[Sun Aug  5 18:42:36 2012] fullrun_mos2_xmm0102640701_pi300-10000_cl_pass1_src7_1.ximg exists
[Sun Aug  5 18:42:36 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0102640701_pi300-10000_cl_pass1_src7.csv
[Sun Aug  5 18:42:36 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0102640701_pi300-10000_cl_pass1_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0102640701_pi300-10000_cl_pass1_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Aug  5 18:42:36 2012] fullrun_mos2_xmm0102640701_pi300-10000_cl_pass1_tfrozen_src7.ximg exists
[Sun Aug  5 18:42:36 2012] fullrun_mos2_xmm0102640701_pi300-10000_cl_pass1_tfrozen_src7_1.ximg exists
[Sun Aug  5 18:42:36 2012] Fit fullrun_mos2_xmm0102640701_pi300-10000_cl_pass1_tfrozen_src7 appears to have run properly
[Sun Aug  5 18:42:44 2012] Spatial fit model total counts = 82.574400, observed total counts = 84.000000
[Sun Aug  5 18:42:44 2012] Offset between fit and detection position for source 11 = 0.407643 pixels
[Sun Aug  5 18:42:44 2012] 83.274700 total counts/ 48.752700 bgd. counts: snr = 4.944207
Spatial fit parameters:
  Offset between fit and detection position for source 11 = 0.407643 pixels
  Position = (326.1, 368.5) = 1 33 54.91 30 33 12.7
  Extent = 5.7 (4.1-7.3)", rotation angle = 0
  Source counts = 34.5 +/- 9.1
  Background counts = 48.8
  Rate = 0.003 +/- 0.0008
[Sun Aug  5 18:42:44 2012] Vigneting correction estimate = 1.000000
[Sun Aug  5 18:42:44 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Aug  5 18:42:44 2012] Assessing source extent using major axis lower bound
[Sun Aug  5 18:42:44 2012] Source does appear to be extended
[Sun Aug  5 18:42:44 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Aug  5 19:16:45 2012] XMMSAS src. selection expression = ellipse(28320.130180, 32010.423800, 341.826010, 341.826010, 0.000000, X, Y)
[Sun Aug  5 19:16:45 2012] Writing source region out to fullrun_mos2_xmm0102640701_pi300-10000_pass1_cl_src11_src.reg
[Sun Aug  5 19:16:45 2012] Extracting stamp from image fullrun_mos2_xmm0102640701_pi300-10000_cl_sm2.00.img.gz, (306, 349) - (346, 388)
[Sun Aug  5 19:16:45 2012] XMMSAS bgd. selection expression = annulus(28320.130180, 32010.423800, 569.710016, 1139.420033, X, Y) && !ellipse(26762.750488, 30065.081238, 870.000000, 870.000000, 0.000000, X, Y)
[Sun Aug  5 19:16:45 2012] Writing fullrun_mos2_xmm0102640701_pi300-10000_pass1_cl_src11.gif
[Sun Aug  5 19:23:30 2012] Mean detx,y = (2048.41, -8118.41) 
[Sun Aug  5 19:23:31 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Aug  5 19:23:38 2012] Binned source spectrum to 10 counts/bin
[Sun Aug  5 19:23:38 2012] Setting source spectrum file to fullrun_mos2_xmm0102640701_pi300-10000_pass1_cl_src11_src_b10.pi.gz
[Sun Aug  5 19:23:38 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0102640701_pi300-10000_pass1_cl_src11_bgd.pi.gz
[Sun Aug  5 19:30:28 2012] Not generating rmf since there are only 34 counts
[Sun Aug  5 19:30:28 2012] rmf not generated due to insufficient counts
[Sun Aug  5 19:31:37 2012] Updating aperture counts using extracted products
[Sun Aug  5 19:31:37 2012] Error reading totcts from fullrun_mos2_xmm0102640701_pi300-10000_pass1_cl_src11_src_b10.pi.gz
[Sun Aug  5 19:31:38 2012] Calculating source flux in energy range 0.30-8.00
[Sun Aug  5 19:31:38 2012] Using photon index=1.80, rate=0.00299, arf fullrun_mos2_xmm0102640701_pi300-10000_pass1_cl_src11.arf
[Sun Aug  5 19:31:38 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Aug  5 19:31:38 2012] Updating source flux to 5.1e-14
[Sun Aug  5 19:32:05 2012] Source 11 has fewer than 100.000000 counts, skipping spectral fitting