[Sun Aug  5 15:26:22 2012] Detection parameters:
  Position = (326.1, 368.0) = 1 33 54.90 30 33 11.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 60.9 +/- 10.1
  Background counts = 4.9
  Rate = 0.008 +/- 0.001

[Sun Aug  5 15:26:23 2012] Off-axis axis estimate = 5.43'
[Sun Aug  5 15:42:58 2012] Using EEF radius (= 9.14 ")to estimate initial spatial extent for simple fitting
[Sun Aug  5 15:42:58 2012] Initial guess for spatial extent in simple fitting = 9.14"
[Sun Aug  5 15:42:58 2012] source mask rpix=2.1, npix_max = 27, mask sum = 30, frac = 1.108
[Sun Aug  5 15:42:58 2012] Giving source the simple spatial ID 5 for pass 0, mean size = 9.14"
[Sun Aug  5 16:20:08 2012] fullrun_mos1_xmm0102640701_pi300-10000_cl_pass0_src5.ximg exists
[Sun Aug  5 16:20:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0102640701_pi300-10000_cl_pass0_src5.csv
[Sun Aug  5 16:20:08 2012] fullrun_mos1_xmm0102640701_pi300-10000_cl_pass0_src5_1.ximg exists
[Sun Aug  5 16:20:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0102640701_pi300-10000_cl_pass0_src5.csv
[Sun Aug  5 16:20:08 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0102640701_pi300-10000_cl_pass0_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0102640701_pi300-10000_cl_pass0_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Aug  5 16:20:08 2012] fullrun_mos1_xmm0102640701_pi300-10000_cl_pass0_tfrozen_src5.ximg exists
[Sun Aug  5 16:20:08 2012] fullrun_mos1_xmm0102640701_pi300-10000_cl_pass0_tfrozen_src5_1.ximg exists
[Sun Aug  5 16:20:08 2012] Fit fullrun_mos1_xmm0102640701_pi300-10000_cl_pass0_tfrozen_src5 appears to have run properly
[Sun Aug  5 17:16:06 2012] Spatial fit model total counts = 92.540800, observed total counts = 92.000000
[Sun Aug  5 17:16:06 2012] Offset between fit and detection position for source 9 = 0.124123 pixels
[Sun Aug  5 17:16:06 2012] 90.802800 total counts/ 41.087200 bgd. counts: snr = 7.756029
Spatial fit parameters:
  Offset between fit and detection position for source 9 = 0.124123 pixels
  Position = (326.1, 367.9) = 1 33 54.91 30 33 10.0
  Extent = 6.8 (5.4-8.6)", rotation angle = 0
  Source counts = 49.7 +/- 9.5
  Background counts = 41.1
  Rate = 0.004 +/- 0.0008
[Sun Aug  5 17:16:06 2012] Vigneting correction estimate = 1.000000
[Sun Aug  5 17:16:06 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Aug  5 17:16:06 2012] Assessing source extent using major axis lower bound
[Sun Aug  5 17:16:06 2012] Source does appear to be extended
[Sun Aug  5 17:16:06 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Aug  5 17:32:28 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Aug  5 17:32:28 2012] Initial guess for spatial extent in simple fitting = 6.76"
[Sun Aug  5 17:32:28 2012] source mask rpix=1.6, npix_max = 16, mask sum = 16, frac = 0.948
[Sun Aug  5 17:32:28 2012] Giving source the simple spatial ID 5 for pass 1, mean size = 6.76"
[Sun Aug  5 17:49:44 2012] fullrun_mos1_xmm0102640701_pi300-10000_cl_pass1_src5.ximg exists
[Sun Aug  5 17:49:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0102640701_pi300-10000_cl_pass1_src5.csv
[Sun Aug  5 17:49:44 2012] fullrun_mos1_xmm0102640701_pi300-10000_cl_pass1_src5_1.ximg exists
[Sun Aug  5 17:49:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0102640701_pi300-10000_cl_pass1_src5.csv
[Sun Aug  5 17:49:44 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0102640701_pi300-10000_cl_pass1_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0102640701_pi300-10000_cl_pass1_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Aug  5 17:49:44 2012] fullrun_mos1_xmm0102640701_pi300-10000_cl_pass1_tfrozen_src5.ximg exists
[Sun Aug  5 17:49:44 2012] fullrun_mos1_xmm0102640701_pi300-10000_cl_pass1_tfrozen_src5_1.ximg exists
[Sun Aug  5 17:49:44 2012] Fit fullrun_mos1_xmm0102640701_pi300-10000_cl_pass1_tfrozen_src5 appears to have run properly
[Sun Aug  5 18:42:42 2012] Warning, spatial fit 5 centroid is now closest to src. 10
[Sun Aug  5 18:42:42 2012] Vigneting correction estimate = 1.000000
[Sun Aug  5 18:42:42 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Aug  5 18:42:42 2012] Assessing source extent using major axis lower bound
[Sun Aug  5 18:42:42 2012] Source does appear to be extended
[Sun Aug  5 18:42:42 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Aug  5 18:58:00 2012] XMMSAS src. selection expression = ellipse(28321.226780, 31956.614600, 405.677412, 405.677412, 0.000000, X, Y)
[Sun Aug  5 18:58:00 2012] Writing source region out to fullrun_mos1_xmm0102640701_pi300-10000_pass1_cl_src9_src.reg
[Sun Aug  5 18:58:00 2012] Extracting stamp from image fullrun_mos1_xmm0102640701_pi300-10000_cl_sm2.00.img.gz, (303, 345) - (349, 391)
[Sun Aug  5 18:58:00 2012] XMMSAS bgd. selection expression = annulus(28321.226780, 31956.614600, 676.129019, 1352.258039, X, Y)
[Sun Aug  5 18:58:00 2012] Writing fullrun_mos1_xmm0102640701_pi300-10000_pass1_cl_src9.gif
[Sun Aug  5 19:03:26 2012] Mean detx,y = (-7838.39, -2271.30) 
[Sun Aug  5 19:03:27 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Aug  5 19:03:37 2012] Binned source spectrum to 10 counts/bin
[Sun Aug  5 19:03:38 2012] Setting source spectrum file to fullrun_mos1_xmm0102640701_pi300-10000_pass1_cl_src9_src_b10.pi.gz
[Sun Aug  5 19:03:38 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0102640701_pi300-10000_pass1_cl_src9_bgd.pi.gz
[Sun Aug  5 19:16:00 2012] Not generating rmf since there are only 49 counts
[Sun Aug  5 19:16:00 2012] rmf not generated due to insufficient counts
[Sun Aug  5 19:31:37 2012] Updating aperture counts using extracted products
[Sun Aug  5 19:31:37 2012] Error reading totcts from fullrun_mos1_xmm0102640701_pi300-10000_pass1_cl_src9_src_b10.pi.gz
[Sun Aug  5 19:31:37 2012] Calculating source flux in energy range 0.30-8.00
[Sun Aug  5 19:31:37 2012] Using photon index=1.80, rate=0.00431, arf fullrun_mos1_xmm0102640701_pi300-10000_pass1_cl_src9.arf
[Sun Aug  5 19:31:37 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Aug  5 19:31:37 2012] Updating source flux to 6.7e-14
[Sun Aug  5 19:31:39 2012] Source 9 has fewer than 100.000000 counts, skipping spectral fitting