[Thu Jan 26 10:17:54 2012] Detection parameters:
  Position = (243.5, 107.2) = 1 33 43.59 30 39 17.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 73.1 +/- 13.2
  Background counts = 16.1
  Rate = 0.005 +/- 0.001

[Thu Jan 26 10:17:54 2012] Off-axis axis estimate = 14.43'
[Thu Jan 26 11:37:11 2012] Using EEF radius (= 13.64 ")to estimate initial spatial extent for simple fitting
[Thu Jan 26 11:37:11 2012] Initial guess for spatial extent in simple fitting = 13.64"
[Thu Jan 26 11:37:11 2012] source mask rpix=3.1, npix_max = 52, mask sum = 49, frac = 0.927
[Thu Jan 26 11:37:11 2012] Giving source the simple spatial ID 6 for pass 0, mean size = 13.64"
[Thu Jan 26 12:09:02 2012] fullrun_mos2_xmm0102640301_pi300-10000_cl_pass0_src6.ximg exists
[Thu Jan 26 12:09:02 2012] fullrun_mos2_xmm0102640301_pi300-10000_cl_pass0_src6_1.ximg exists
[Thu Jan 26 12:09:02 2012] Fit fullrun_mos2_xmm0102640301_pi300-10000_cl_pass0_src6 appears to have run properly
[Thu Jan 26 12:09:02 2012] fullrun_mos2_xmm0102640301_pi300-10000_cl_pass0_tfrozen_src6.ximg exists
[Thu Jan 26 12:09:02 2012] fullrun_mos2_xmm0102640301_pi300-10000_cl_pass0_tfrozen_src6_1.ximg exists
[Thu Jan 26 12:09:02 2012] Fit fullrun_mos2_xmm0102640301_pi300-10000_cl_pass0_tfrozen_src6 appears to have run properly
[Thu Jan 26 12:09:13 2012] Spatial fit model total counts = 360.490000, observed total counts = 359.000000
[Thu Jan 26 12:09:13 2012] Offset between fit and detection position for source 7 = 9.079016 pixels
[Thu Jan 26 12:09:13 2012] 371.531700 total counts/ 75.931700 bgd. counts: snr = 33.922892
Spatial fit parameters:
  Offset between fit and detection position for source 7 = 9.079016 pixels
  Position = (234.4, 107.6) = 1 33 46.65 30 39 19.7
  Extent = 27.3 (27.3-27.3)", rotation angle = 0
  Source counts = 295.6 +/- 19.3
  Background counts = 75.9
  Rate = 0.03 +/- 0.002
[Thu Jan 26 12:09:13 2012] Vigneting correction estimate = 1.000000
[Thu Jan 26 12:09:13 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jan 26 12:09:13 2012] Assessing source extent using major axis lower bound
[Thu Jan 26 12:09:13 2012] Source does appear to be extended
[Thu Jan 26 12:09:13 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jan 26 12:09:13 2012] Source is confused with source 8
[Thu Jan 26 13:13:17 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Jan 26 13:13:17 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Jan 26 13:13:17 2012] Initial guess for spatial extent in simple fitting = 27.27"
[Thu Jan 26 13:13:17 2012] source mask rpix=6.3, npix_max = 183, mask sum = 169, frac = 0.922
[Thu Jan 26 13:13:17 2012] Giving source the simple spatial ID 6 for pass 1, mean size = 27.27"
[Thu Jan 26 14:21:53 2012] fullrun_mos2_xmm0102640301_pi300-10000_cl_pass1_src6.ximg exists
[Thu Jan 26 14:21:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0102640301_pi300-10000_cl_pass1_src6.csv
[Thu Jan 26 14:21:53 2012] fullrun_mos2_xmm0102640301_pi300-10000_cl_pass1_src6_1.ximg exists
[Thu Jan 26 14:21:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0102640301_pi300-10000_cl_pass1_src6.csv
[Thu Jan 26 14:21:53 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0102640301_pi300-10000_cl_pass1_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0102640301_pi300-10000_cl_pass1_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jan 26 14:21:54 2012] fullrun_mos2_xmm0102640301_pi300-10000_cl_pass1_tfrozen_src6.ximg exists
[Thu Jan 26 14:21:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0102640301_pi300-10000_cl_pass1_tfrozen_src6.csv
[Thu Jan 26 14:21:54 2012] fullrun_mos2_xmm0102640301_pi300-10000_cl_pass1_tfrozen_src6_1.ximg exists
[Thu Jan 26 14:21:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0102640301_pi300-10000_cl_pass1_tfrozen_src6.csv
[Thu Jan 26 14:21:54 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0102640301_pi300-10000_cl_pass1_tfrozen_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0102640301_pi300-10000_cl_pass1_tfrozen_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jan 26 14:22:04 2012] Warning: source 1 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 7 at 14.539049 pixels away
[Thu Jan 26 14:22:04 2012] Warning, spatial fit 6 centroid is now closest to src. 6
[Thu Jan 26 14:22:04 2012] Vigneting correction estimate = 1.000000
[Thu Jan 26 14:22:04 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jan 26 14:22:04 2012] Assessing source extent using major axis lower bound
[Thu Jan 26 14:22:04 2012] Source does appear to be extended
[Thu Jan 26 14:22:04 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jan 26 15:03:30 2012] XMMSAS src. selection expression = ellipse(20343.554000, 9314.219720, 1636.476047, 1636.476047, 0.000000, X, Y)
[Thu Jan 26 15:03:30 2012] Writing source region out to fullrun_mos2_xmm0102640301_pi300-10000_pass1_cl_src7_src.reg
[Thu Jan 26 15:03:30 2012] Extracting stamp from image fullrun_mos2_xmm0102640301_pi300-10000_cl_sm2.00.img.gz, (140, 14) - (328, 202)
[Thu Jan 26 15:03:30 2012] XMMSAS bgd. selection expression = annulus(20343.554000, 9314.219720, 2727.460078, 5454.920157, X, Y) && !ellipse(19249.805600, 9683.842400, 798.048023, 798.048023, 0.000000, X, Y) && !ellipse(26078.602539, 14990.959915, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18238.028885, 10289.295975, 870.000000, 870.000000, 0.000000, X, Y)
[Thu Jan 26 15:03:30 2012] Writing fullrun_mos2_xmm0102640301_pi300-10000_pass1_cl_src7.gif
[Thu Jan 26 15:06:37 2012] Mean detx,y = (2028.73, 15865.55) 
[Thu Jan 26 15:06:39 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Jan 26 15:07:39 2012] Binned source spectrum to 10 counts/bin
[Thu Jan 26 15:07:39 2012] Setting source spectrum file to fullrun_mos2_xmm0102640301_pi300-10000_pass1_cl_src7_src_b10.pi.gz
[Thu Jan 26 15:07:39 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0102640301_pi300-10000_pass1_cl_src7_bgd.pi.gz
[Thu Jan 26 15:34:18 2012] Updating aperture counts using extracted products
[Thu Jan 26 15:34:18 2012] Error reading totcts from fullrun_mos2_xmm0102640301_pi300-10000_pass1_cl_src7_src_b10.pi.gz
[Thu Jan 26 15:34:18 2012] Calculating source flux in energy range 0.30-8.00
[Thu Jan 26 15:34:18 2012] Using photon index=1.80, rate=0.0251, arf fullrun_mos2_xmm0102640301_pi300-10000_pass1_cl_src7.arf
[Thu Jan 26 15:34:18 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jan 26 15:34:18 2012] Updating source flux to 6.8e-13
[Thu Jan 26 15:34:46 2012] Flag c found in src. 7 procflags, skipping spectral fitting