[Thu Jan 26 10:17:54 2012] Detection parameters:
  Position = (348.5, 227.9) = 1 33 8.17 30 48 3.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 39.3 +/- 9.9
  Background counts = 19.8
  Rate = 0.005 +/- 0.001

[Thu Jan 26 10:17:54 2012] Off-axis axis estimate = 6.27'
[Thu Jan 26 11:37:11 2012] Using EEF radius (= 9.56 ")to estimate initial spatial extent for simple fitting
[Thu Jan 26 11:37:11 2012] Initial guess for spatial extent in simple fitting = 9.56"
[Thu Jan 26 11:37:11 2012] source mask rpix=2.2, npix_max = 29, mask sum = 30, frac = 1.030
[Thu Jan 26 11:37:11 2012] Giving source the simple spatial ID 7 for pass 0, mean size = 9.56"
[Thu Jan 26 12:09:02 2012] fullrun_mos2_xmm0102640301_pi300-10000_cl_pass0_src7.ximg exists
[Thu Jan 26 12:09:02 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0102640301_pi300-10000_cl_pass0_src7.csv
[Thu Jan 26 12:09:02 2012] fullrun_mos2_xmm0102640301_pi300-10000_cl_pass0_src7_1.ximg exists
[Thu Jan 26 12:09:02 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0102640301_pi300-10000_cl_pass0_src7.csv
[Thu Jan 26 12:09:02 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0102640301_pi300-10000_cl_pass0_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0102640301_pi300-10000_cl_pass0_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jan 26 12:09:02 2012] fullrun_mos2_xmm0102640301_pi300-10000_cl_pass0_tfrozen_src7.ximg exists
[Thu Jan 26 12:09:02 2012] fullrun_mos2_xmm0102640301_pi300-10000_cl_pass0_tfrozen_src7_1.ximg exists
[Thu Jan 26 12:09:02 2012] Fit fullrun_mos2_xmm0102640301_pi300-10000_cl_pass0_tfrozen_src7 appears to have run properly
[Thu Jan 26 12:09:13 2012] Spatial fit model total counts = 150.250000, observed total counts = 150.000000
[Thu Jan 26 12:09:13 2012] Offset between fit and detection position for source 4 = 4.652302 pixels
[Thu Jan 26 12:09:13 2012] 160.491600 total counts/ 41.210600 bgd. counts: snr = 18.580902
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 4.652302 pixels
  Position = (344.5, 225.4) = 1 33 9.50 30 47 52.0
  Extent = 19.1 (19.1-38.3)", rotation angle = 0
  Source counts = 119.3 +/- 12.7
  Background counts = 41.2
  Rate = 0.01 +/- 0.001
[Thu Jan 26 12:09:13 2012] Vigneting correction estimate = 1.000000
[Thu Jan 26 12:09:13 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jan 26 12:09:13 2012] Assessing source extent using major axis lower bound
[Thu Jan 26 12:09:13 2012] Source does appear to be extended
[Thu Jan 26 12:09:13 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jan 26 13:13:17 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Jan 26 13:13:17 2012] Initial guess for spatial extent in simple fitting = 19.13"
[Thu Jan 26 13:13:17 2012] source mask rpix=4.4, npix_max = 95, mask sum = 90, frac = 0.938
[Thu Jan 26 13:13:17 2012] Giving source the simple spatial ID 7 for pass 1, mean size = 19.13"
[Thu Jan 26 14:21:53 2012] fullrun_mos2_xmm0102640301_pi300-10000_cl_pass1_src7.ximg exists
[Thu Jan 26 14:21:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0102640301_pi300-10000_cl_pass1_src7.csv
[Thu Jan 26 14:21:53 2012] fullrun_mos2_xmm0102640301_pi300-10000_cl_pass1_src7_1.ximg exists
[Thu Jan 26 14:21:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0102640301_pi300-10000_cl_pass1_src7.csv
[Thu Jan 26 14:21:53 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0102640301_pi300-10000_cl_pass1_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0102640301_pi300-10000_cl_pass1_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jan 26 14:21:54 2012] fullrun_mos2_xmm0102640301_pi300-10000_cl_pass1_tfrozen_src7.ximg exists
[Thu Jan 26 14:21:54 2012] fullrun_mos2_xmm0102640301_pi300-10000_cl_pass1_tfrozen_src7_1.ximg exists
[Thu Jan 26 14:21:54 2012] Fit fullrun_mos2_xmm0102640301_pi300-10000_cl_pass1_tfrozen_src7 appears to have run properly
[Thu Jan 26 14:22:04 2012] Source 4 is offset by -4.045655 and -2.878598 pixels which is larger than
2 X fitted extent = 2.385894 x 2.385894, not incorporating fit results
[Thu Jan 26 14:22:04 2012] Vigneting correction estimate = 1.000000
[Thu Jan 26 14:22:04 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jan 26 14:22:04 2012] Assessing source extent using major axis lower bound
[Thu Jan 26 14:22:04 2012] Source does appear to be extended
[Thu Jan 26 14:22:04 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jan 26 15:03:30 2012] XMMSAS src. selection expression = ellipse(29926.086000, 19559.364000, 1147.752033, 1147.752033, 0.000000, X, Y)
[Thu Jan 26 15:03:30 2012] Writing source region out to fullrun_mos2_xmm0102640301_pi300-10000_pass1_cl_src4_src.reg
[Thu Jan 26 15:03:30 2012] Extracting stamp from image fullrun_mos2_xmm0102640301_pi300-10000_cl_sm2.00.img.gz, (279, 159) - (410, 291)
[Thu Jan 26 15:03:30 2012] XMMSAS bgd. selection expression = annulus(29926.086000, 19559.364000, 1912.920055, 3825.840110, X, Y) && !ellipse(26078.602539, 14990.959915, 870.000000, 870.000000, 0.000000, X, Y)
[Thu Jan 26 15:03:30 2012] Writing fullrun_mos2_xmm0102640301_pi300-10000_pass1_cl_src4.gif
[Thu Jan 26 15:07:42 2012] Mean detx,y = (7536.59, 2419.15) 
[Thu Jan 26 15:07:44 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Jan 26 15:08:14 2012] Binned source spectrum to 10 counts/bin
[Thu Jan 26 15:08:14 2012] Setting source spectrum file to fullrun_mos2_xmm0102640301_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Thu Jan 26 15:08:14 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0102640301_pi300-10000_pass1_cl_src4_bgd.pi.gz
[Thu Jan 26 15:34:18 2012] Updating aperture counts using extracted products
[Thu Jan 26 15:34:18 2012] Error reading totcts from fullrun_mos2_xmm0102640301_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Thu Jan 26 15:34:18 2012] Calculating source flux in energy range 0.30-8.00
[Thu Jan 26 15:34:18 2012] Using photon index=1.80, rate=0.0101, arf fullrun_mos2_xmm0102640301_pi300-10000_pass1_cl_src4.arf
[Thu Jan 26 15:34:18 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jan 26 15:34:18 2012] Updating source flux to 1.5e-13
[Thu Jan 26 15:34:46 2012] Flag b found in src. 4 procflags, skipping spectral fitting