[Wed Jul 11 20:56:11 2012] Detection parameters:
  Position = (320.1, 250.9) = 1 34 25.79 30 55 19.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1690.2 +/- 49.0
  Background counts = 23.5
  Rate = 0.2 +/- 0.006

[Wed Jul 11 20:56:11 2012] Off-axis axis estimate = 3.79'
[Wed Jul 11 20:57:40 2012] Using EEF radius (= 8.32 ")to estimate initial spatial extent for simple fitting
[Wed Jul 11 20:57:40 2012] Initial guess for spatial extent in simple fitting = 8.32"
[Wed Jul 11 20:57:40 2012] source mask rpix=1.9, npix_max = 23, mask sum = 20, frac = 0.859
[Wed Jul 11 20:57:40 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 8.32"
[Wed Jul 11 21:22:01 2012] fullrun_pn_xmm0102640201_pi300-10000_cl_pass0_src1.ximg exists
[Wed Jul 11 21:22:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0102640201_pi300-10000_cl_pass0_src1.csv
[Wed Jul 11 21:22:01 2012] fullrun_pn_xmm0102640201_pi300-10000_cl_pass0_src1_1.ximg exists
[Wed Jul 11 21:22:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0102640201_pi300-10000_cl_pass0_src1.csv
[Wed Jul 11 21:22:01 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0102640201_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0102640201_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jul 11 21:22:02 2012] fullrun_pn_xmm0102640201_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Wed Jul 11 21:22:02 2012] fullrun_pn_xmm0102640201_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Wed Jul 11 21:22:02 2012] Fit fullrun_pn_xmm0102640201_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Wed Jul 11 22:05:34 2012] Spatial fit model total counts = 1421.300000, observed total counts = 1391.000000
[Wed Jul 11 22:05:34 2012] Offset between fit and detection position for source 1 = 0.117737 pixels
[Wed Jul 11 22:05:34 2012] 1416.720000 total counts/ 284.780000 bgd. counts: snr = 67.076233
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.117737 pixels
  Position = (320.0, 250.8) = 1 34 25.81 30 55 19.2
  Extent = 5.8 (5.6-6.1)", rotation angle = 0
  Source counts = 1131.9 +/- 37.6
  Background counts = 284.8
  Rate = 0.1 +/- 0.003
[Wed Jul 11 22:05:34 2012] Vigneting correction estimate = 1.000000
[Wed Jul 11 22:05:34 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jul 11 22:05:34 2012] Assessing source extent using major axis lower bound
[Wed Jul 11 22:05:34 2012] Source does appear to be extended
[Wed Jul 11 22:05:34 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jul 11 22:05:47 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Jul 11 22:05:47 2012] Initial guess for spatial extent in simple fitting = 5.85"
[Wed Jul 11 22:05:47 2012] source mask rpix=1.3, npix_max = 13, mask sum = 16, frac = 1.176
[Wed Jul 11 22:05:47 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 5.85"
[Wed Jul 11 22:29:08 2012] fullrun_pn_xmm0102640201_pi300-10000_cl_pass1_src1.ximg exists
[Wed Jul 11 22:29:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0102640201_pi300-10000_cl_pass1_src1.csv
[Wed Jul 11 22:29:08 2012] fullrun_pn_xmm0102640201_pi300-10000_cl_pass1_src1_1.ximg exists
[Wed Jul 11 22:29:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0102640201_pi300-10000_cl_pass1_src1.csv
[Wed Jul 11 22:29:08 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0102640201_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0102640201_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jul 11 22:29:08 2012] fullrun_pn_xmm0102640201_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Wed Jul 11 22:29:08 2012] fullrun_pn_xmm0102640201_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Wed Jul 11 22:29:08 2012] Fit fullrun_pn_xmm0102640201_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Wed Jul 11 23:17:57 2012] Spatial fit model total counts = 1421.240000, observed total counts = 1391.000000
[Wed Jul 11 23:17:57 2012] Offset between fit and detection position for source 1 = 0.000079 pixels
[Wed Jul 11 23:17:57 2012] 1416.668000 total counts/ 284.388000 bgd. counts: snr = 67.142607
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.000079 pixels
  Position = (320.0, 250.8) = 1 34 25.81 30 55 19.2
  Extent = 5.9 (5.6-6.1)", rotation angle = 0
  Source counts = 1132.3 +/- 37.6
  Background counts = 284.4
  Rate = 0.1 +/- 0.003
[Wed Jul 11 23:17:57 2012] Vigneting correction estimate = 1.000000
[Wed Jul 11 23:17:57 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jul 11 23:17:57 2012] Assessing source extent using major axis lower bound
[Wed Jul 11 23:17:57 2012] Source does appear to be extended
[Wed Jul 11 23:17:57 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jul 11 23:18:11 2012] Counts = 1132.280000, rescaling region sizes by 2.000000
[Wed Jul 11 23:18:11 2012] XMMSAS src. selection expression = ellipse(27793.519600, 21770.060200, 702.174418, 702.174418, 0.000000, X, Y)
[Wed Jul 11 23:18:11 2012] Writing source region out to fullrun_pn_xmm0102640201_pi300-10000_pass1_cl_src1_src.reg
[Wed Jul 11 23:18:11 2012] Extracting stamp from image fullrun_pn_xmm0102640201_pi300-10000_cl_sm2.00.img.gz, (280, 210) - (360, 291)
[Wed Jul 11 23:18:11 2012] XMMSAS bgd. selection expression = annulus(27793.519600, 21770.060200, 2340.581392, 4681.162784, X, Y) && !ellipse(25928.999603, 24853.232178, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24443.628843, 21493.550455, 456.865230, 406.419108, 349.332212, X, Y) && !ellipse(25401.498383, 23641.636108, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22943.139200, 22123.806200, 508.629615, 508.629615, 0.000000, X, Y) && !ellipse(26166.256800, 17815.571600, 484.071214, 484.071214, 0.000000, X, Y)
[Wed Jul 11 23:18:11 2012] Writing fullrun_pn_xmm0102640201_pi300-10000_pass1_cl_src1.gif
[Wed Jul 11 23:18:17 2012] Mean detx,y = (-4414.91, -1602.88) 
[Wed Jul 11 23:18:20 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Jul 11 23:19:21 2012] Binned source spectrum to 10 counts/bin
[Wed Jul 11 23:19:21 2012] Setting source spectrum file to fullrun_pn_xmm0102640201_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Wed Jul 11 23:19:21 2012] Setting bgd. spectrum file to fullrun_pn_xmm0102640201_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Thu Jul 12 00:09:33 2012] Updating aperture counts using extracted products
[Thu Jul 12 00:09:33 2012] Error reading totcts from fullrun_pn_xmm0102640201_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Thu Jul 12 00:09:33 2012] Calculating source flux in energy range 0.30-8.00
[Thu Jul 12 00:09:33 2012] Using photon index=1.80, rate=0.0968, arf fullrun_pn_xmm0102640201_pi300-10000_pass1_cl_src1.arf
[Thu Jul 12 00:09:33 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jul 12 00:09:33 2012] Updating source flux to 3.5e-13
[Thu Jul 12 00:10:37 2012] Reading fit data from xmm0102640201/analysis//spectral/fullrun_pn_xmm0102640201_pi300-10000_pass1_cl_src1_pl.csv
[Thu Jul 12 00:10:37 2012] Spectral fit parameter nH value = 1.47234e+21
[Thu Jul 12 00:10:37 2012] Spectral fit parameter PhoIndex value = 1.9863
[Thu Jul 12 00:10:37 2012] Failed to get F(0.3-8.0) from xmm0102640201/analysis//spectral/fullrun_pn_xmm0102640201_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Thu Jul 12 00:10:37 2012] Calculating source flux in energy range 0.30-8.00
[Thu Jul 12 00:10:37 2012] Using Nh = 1.5e+21, photon index=1.99, rate=0.0968, arf fullrun_pn_xmm0102640201_pi300-10000_pass1_cl_src1.arf
[Thu Jul 12 00:10:37 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jul 12 00:10:37 2012] Updating source flux to 4.2e-13