[Wed Jul 11 20:56:52 2012] Detection parameters:
  Position = (325.7, 408.2) = 1 34 23.87 31 6 44.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 115.4 +/- 13.0
  Background counts = 5.4
  Rate = 0.01 +/- 0.001

[Wed Jul 11 20:56:52 2012] Off-axis axis estimate = 8.20'
[Wed Jul 11 21:43:50 2012] Using EEF radius (= 10.53 ")to estimate initial spatial extent for simple fitting
[Wed Jul 11 21:43:50 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Jul 11 21:43:50 2012] Initial guess for spatial extent in simple fitting = 10.53"
[Wed Jul 11 21:43:50 2012] source mask rpix=2.4, npix_max = 34, mask sum = 36, frac = 1.056
[Wed Jul 11 21:43:50 2012] Giving source the simple spatial ID 5 for pass 0, mean size = 10.53"
[Wed Jul 11 22:05:29 2012] fullrun_mos2_xmm0102640201_pi300-10000_cl_pass0_src5.ximg exists
[Wed Jul 11 22:05:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0102640201_pi300-10000_cl_pass0_src5.csv
[Wed Jul 11 22:05:29 2012] fullrun_mos2_xmm0102640201_pi300-10000_cl_pass0_src5_1.ximg exists
[Wed Jul 11 22:05:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0102640201_pi300-10000_cl_pass0_src5.csv
[Wed Jul 11 22:05:29 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0102640201_pi300-10000_cl_pass0_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0102640201_pi300-10000_cl_pass0_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jul 11 22:05:29 2012] fullrun_mos2_xmm0102640201_pi300-10000_cl_pass0_tfrozen_src5.ximg exists
[Wed Jul 11 22:05:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0102640201_pi300-10000_cl_pass0_tfrozen_src5.csv
[Wed Jul 11 22:05:29 2012] fullrun_mos2_xmm0102640201_pi300-10000_cl_pass0_tfrozen_src5_1.ximg exists
[Wed Jul 11 22:05:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0102640201_pi300-10000_cl_pass0_tfrozen_src5.csv
[Wed Jul 11 22:05:29 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0102640201_pi300-10000_cl_pass0_tfrozen_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0102640201_pi300-10000_cl_pass0_tfrozen_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jul 11 22:05:40 2012] Warning: source 5 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 5 at 11.699556 pixels away
[Wed Jul 11 22:05:40 2012] Vigneting correction estimate = 1.000000
[Wed Jul 11 22:05:40 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jul 11 22:05:40 2012] Assessing source extent using major
[Wed Jul 11 22:05:40 2012] Source does appear to be extended
[Wed Jul 11 22:05:40 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jul 11 22:53:39 2012] Using EEF radius (= 10.53 ")to estimate initial spatial extent for simple fitting
[Wed Jul 11 22:53:39 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Jul 11 22:53:39 2012] Initial guess for spatial extent in simple fitting = 10.53"
[Wed Jul 11 22:53:39 2012] source mask rpix=2.4, npix_max = 34, mask sum = 36, frac = 1.056
[Wed Jul 11 22:53:39 2012] Giving source the simple spatial ID 5 for pass 1, mean size = 10.53"
[Wed Jul 11 23:17:51 2012] fullrun_mos2_xmm0102640201_pi300-10000_cl_pass1_src5.ximg exists
[Wed Jul 11 23:17:51 2012] fullrun_mos2_xmm0102640201_pi300-10000_cl_pass1_src5_1.ximg exists
[Wed Jul 11 23:17:51 2012] Fit fullrun_mos2_xmm0102640201_pi300-10000_cl_pass1_src5 appears to have run properly
[Wed Jul 11 23:17:52 2012] fullrun_mos2_xmm0102640201_pi300-10000_cl_pass1_tfrozen_src5.ximg exists
[Wed Jul 11 23:17:52 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0102640201_pi300-10000_cl_pass1_tfrozen_src5.csv
[Wed Jul 11 23:17:52 2012] fullrun_mos2_xmm0102640201_pi300-10000_cl_pass1_tfrozen_src5_1.ximg exists
[Wed Jul 11 23:17:52 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0102640201_pi300-10000_cl_pass1_tfrozen_src5.csv
[Wed Jul 11 23:17:52 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0102640201_pi300-10000_cl_pass1_tfrozen_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0102640201_pi300-10000_cl_pass1_tfrozen_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jul 11 23:18:04 2012] Spatial fit model total counts = 152.726000, observed total counts = 152.000000
[Wed Jul 11 23:18:04 2012] Offset between fit and detection position for source 5 = 0.651169 pixels
[Wed Jul 11 23:18:04 2012] 167.000400 total counts/ 82.267000 bgd. counts: snr = 9.342042
Spatial fit parameters:
  Offset between fit and detection position for source 5 = 0.651169 pixels
  Position = (325.3, 407.6) = 1 34 23.99 31 6 41.4
  Extent = 5.1" x 5.1", rotation angle = 0
  Source counts = 84.7 +/- 12.9
  Background counts = 82.3
  Rate = 0.005 +/- 0.0008
[Wed Jul 11 23:18:04 2012] Vigneting correction estimate = 1.000000
[Wed Jul 11 23:18:04 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jul 11 23:18:04 2012] Assessing source extent using major
[Wed Jul 11 23:18:04 2012] Source does appear to be extended
[Wed Jul 11 23:18:04 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jul 11 23:55:35 2012] XMMSAS src. selection expression = ellipse(28256.684600, 35414.459000, 305.221209, 305.221209, 0.000000, X, Y)
[Wed Jul 11 23:55:35 2012] Writing source region out to fullrun_mos2_xmm0102640201_pi300-10000_pass1_cl_src5_src.reg
[Wed Jul 11 23:55:35 2012] Extracting stamp from image fullrun_mos2_xmm0102640201_pi300-10000_cl_sm2.00.img.gz, (308, 390) - (343, 425)
[Wed Jul 11 23:55:35 2012] XMMSAS bgd. selection expression = annulus(28256.684600, 35414.459000, 508.702015, 1017.404029, X, Y)
[Wed Jul 11 23:55:35 2012] Writing fullrun_mos2_xmm0102640201_pi300-10000_pass1_cl_src5.gif
[Wed Jul 11 23:56:26 2012] Mean detx,y = (-516.81, -11307.34) 
[Wed Jul 11 23:56:27 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Jul 11 23:56:39 2012] Binned source spectrum to 10 counts/bin
[Wed Jul 11 23:56:39 2012] Setting source spectrum file to fullrun_mos2_xmm0102640201_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Wed Jul 11 23:56:39 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0102640201_pi300-10000_pass1_cl_src5_bgd.pi.gz
[Thu Jul 12 00:03:52 2012] Not generating rmf since there are only 84 counts
[Thu Jul 12 00:03:52 2012] rmf not generated due to insufficient counts
[Thu Jul 12 00:09:34 2012] Updating aperture counts using extracted products
[Thu Jul 12 00:09:34 2012] Error reading totcts from fullrun_mos2_xmm0102640201_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Thu Jul 12 00:09:34 2012] Calculating source flux in energy range 0.30-8.00
[Thu Jul 12 00:09:34 2012] Using photon index=1.80, rate=0.00498, arf fullrun_mos2_xmm0102640201_pi300-10000_pass1_cl_src5.arf
[Thu Jul 12 00:09:34 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jul 12 00:09:34 2012] Updating source flux to 1.2e-13
[Thu Jul 12 00:09:48 2012] Source 5 has fewer than 100.000000 counts, skipping spectral fitting