[Wed Jul 11 20:56:52 2012] Detection parameters:
  Position = (298.5, 286.7) = 1 34 33.08 30 57 55.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 274.2 +/- 20.3
  Background counts = 6.5
  Rate = 0.02 +/- 0.001

[Wed Jul 11 20:56:52 2012] Off-axis axis estimate = 0.85'
[Wed Jul 11 21:43:50 2012] Using EEF radius (= 6.85 ")to estimate initial spatial extent for simple fitting
[Wed Jul 11 21:43:50 2012] Initial guess for spatial extent in simple fitting = 6.85"
[Wed Jul 11 21:43:50 2012] source mask rpix=1.6, npix_max = 17, mask sum = 20, frac = 1.161
[Wed Jul 11 21:43:50 2012] Giving source the simple spatial ID 3 for pass 0, mean size = 6.85"
[Wed Jul 11 22:05:29 2012] fullrun_mos2_xmm0102640201_pi300-10000_cl_pass0_src3.ximg exists
[Wed Jul 11 22:05:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0102640201_pi300-10000_cl_pass0_src3.csv
[Wed Jul 11 22:05:29 2012] fullrun_mos2_xmm0102640201_pi300-10000_cl_pass0_src3_1.ximg exists
[Wed Jul 11 22:05:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0102640201_pi300-10000_cl_pass0_src3.csv
[Wed Jul 11 22:05:29 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0102640201_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0102640201_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jul 11 22:05:29 2012] fullrun_mos2_xmm0102640201_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Wed Jul 11 22:05:29 2012] fullrun_mos2_xmm0102640201_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Wed Jul 11 22:05:29 2012] Fit fullrun_mos2_xmm0102640201_pi300-10000_cl_pass0_tfrozen_src3 appears to have run properly
[Wed Jul 11 22:05:40 2012] Spatial fit model total counts = 281.846000, observed total counts = 282.000000
[Wed Jul 11 22:05:40 2012] Offset between fit and detection position for source 12 = 0.279741 pixels
[Wed Jul 11 22:05:40 2012] 281.416300 total counts/ 75.749300 bgd. counts: snr = 23.630630
Spatial fit parameters:
  Offset between fit and detection position for source 12 = 0.279741 pixels
  Position = (298.7, 286.5) = 1 34 33.02 30 57 54.7
  Extent = 6.6 (5.7-7.3)", rotation angle = 0
  Source counts = 205.7 +/- 16.8
  Background counts = 75.7
  Rate = 0.01 +/- 0.001
[Wed Jul 11 22:05:40 2012] Vigneting correction estimate = 1.000000
[Wed Jul 11 22:05:40 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jul 11 22:05:40 2012] Assessing source extent using major axis lower bound
[Wed Jul 11 22:05:40 2012] Source does appear to be extended
[Wed Jul 11 22:05:40 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jul 11 22:53:39 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Jul 11 22:53:39 2012] Initial guess for spatial extent in simple fitting = 6.56"
[Wed Jul 11 22:53:39 2012] source mask rpix=1.5, npix_max = 16, mask sum = 16, frac = 0.992
[Wed Jul 11 22:53:39 2012] Giving source the simple spatial ID 3 for pass 1, mean size = 6.56"
[Wed Jul 11 23:17:51 2012] fullrun_mos2_xmm0102640201_pi300-10000_cl_pass1_src3.ximg exists
[Wed Jul 11 23:17:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0102640201_pi300-10000_cl_pass1_src3.csv
[Wed Jul 11 23:17:51 2012] fullrun_mos2_xmm0102640201_pi300-10000_cl_pass1_src3_1.ximg exists
[Wed Jul 11 23:17:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0102640201_pi300-10000_cl_pass1_src3.csv
[Wed Jul 11 23:17:51 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0102640201_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0102640201_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jul 11 23:17:52 2012] fullrun_mos2_xmm0102640201_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Wed Jul 11 23:17:52 2012] fullrun_mos2_xmm0102640201_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Wed Jul 11 23:17:52 2012] Fit fullrun_mos2_xmm0102640201_pi300-10000_cl_pass1_tfrozen_src3 appears to have run properly
[Wed Jul 11 23:18:04 2012] Spatial fit model total counts = 288.001000, observed total counts = 288.000000
[Wed Jul 11 23:18:04 2012] Offset between fit and detection position for source 12 = 0.004168 pixels
[Wed Jul 11 23:18:04 2012] 288.288500 total counts/ 86.097500 bgd. counts: snr = 21.790468
Spatial fit parameters:
  Offset between fit and detection position for source 12 = 0.004168 pixels
  Position = (298.7, 286.5) = 1 34 33.02 30 57 54.7
  Extent = 6.4 (5.6-7.2)", rotation angle = 0
  Source counts = 202.2 +/- 17.0
  Background counts = 86.1
  Rate = 0.01 +/- 0.001
[Wed Jul 11 23:18:04 2012] Vigneting correction estimate = 1.000000
[Wed Jul 11 23:18:04 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jul 11 23:18:04 2012] Assessing source extent using major axis lower bound
[Wed Jul 11 23:18:04 2012] Source does appear to be extended
[Wed Jul 11 23:18:04 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jul 11 23:55:35 2012] XMMSAS src. selection expression = ellipse(25938.076000, 24879.178200, 386.589611, 386.589611, 0.000000, X, Y)
[Wed Jul 11 23:55:35 2012] Writing source region out to fullrun_mos2_xmm0102640201_pi300-10000_pass1_cl_src12_src.reg
[Wed Jul 11 23:55:35 2012] Extracting stamp from image fullrun_mos2_xmm0102640201_pi300-10000_cl_sm2.00.img.gz, (276, 264) - (321, 309)
[Wed Jul 11 23:55:35 2012] XMMSAS bgd. selection expression = annulus(25938.076000, 24879.178200, 644.316019, 1288.632037, X, Y) && !ellipse(25361.911620, 23562.600800, 622.115218, 221.949606, 86.169577, X, Y)
[Wed Jul 11 23:55:35 2012] Writing fullrun_mos2_xmm0102640201_pi300-10000_pass1_cl_src12.gif
[Wed Jul 11 23:56:02 2012] Mean detx,y = (1631.87, -687.72) 
[Wed Jul 11 23:56:03 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Jul 11 23:56:10 2012] Binned source spectrum to 10 counts/bin
[Wed Jul 11 23:56:10 2012] Setting source spectrum file to fullrun_mos2_xmm0102640201_pi300-10000_pass1_cl_src12_src_b10.pi.gz
[Wed Jul 11 23:56:10 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0102640201_pi300-10000_pass1_cl_src12_bgd.pi.gz
[Thu Jul 12 00:09:34 2012] Updating aperture counts using extracted products
[Thu Jul 12 00:09:34 2012] Error reading totcts from fullrun_mos2_xmm0102640201_pi300-10000_pass1_cl_src12_src_b10.pi.gz
[Thu Jul 12 00:09:34 2012] Calculating source flux in energy range 0.30-8.00
[Thu Jul 12 00:09:34 2012] Using photon index=1.80, rate=0.0119, arf fullrun_mos2_xmm0102640201_pi300-10000_pass1_cl_src12.arf
[Thu Jul 12 00:09:34 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jul 12 00:09:34 2012] Updating source flux to 1.5e-13
[Thu Jul 12 00:10:04 2012] Reading fit data from xmm0102640201/analysis//spectral/fullrun_mos2_xmm0102640201_pi300-10000_pass1_cl_src12_pl.csv
[Thu Jul 12 00:10:04 2012] Spectral fit parameter nH value = 5.14371e+21
[Thu Jul 12 00:10:04 2012] Spectral fit parameter PhoIndex value = 4.74338
[Thu Jul 12 00:10:04 2012] Failed to get F(0.3-8.0) from xmm0102640201/analysis//spectral/fullrun_mos2_xmm0102640201_pi300-10000_pass1_cl_src12_pl.csv, possibly due to different flux energy range selected
[Thu Jul 12 00:10:04 2012] Calculating source flux in energy range 0.30-8.00
[Thu Jul 12 00:10:04 2012] Using Nh = 5.1e+21, photon index=4.74, rate=0.0119, arf fullrun_mos2_xmm0102640201_pi300-10000_pass1_cl_src12.arf
[Thu Jul 12 00:10:04 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jul 12 00:10:04 2012] Updating source flux to 9.5e-14