[Wed Jul 11 20:56:52 2012] Detection parameters:
  Position = (281.3, 247.9) = 1 34 38.89 30 55 5.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 447.9 +/- 25.4
  Background counts = 6.2
  Rate = 0.03 +/- 0.002

[Wed Jul 11 20:56:52 2012] Off-axis axis estimate = 3.87'
[Wed Jul 11 21:43:50 2012] Using EEF radius (= 8.36 ")to estimate initial spatial extent for simple fitting
[Wed Jul 11 21:43:50 2012] Initial guess for spatial extent in simple fitting = 8.36"
[Wed Jul 11 21:43:50 2012] source mask rpix=1.9, npix_max = 23, mask sum = 21, frac = 0.895
[Wed Jul 11 21:43:50 2012] Giving source the simple spatial ID 2 for pass 0, mean size = 8.36"
[Wed Jul 11 22:05:29 2012] fullrun_mos2_xmm0102640201_pi300-10000_cl_pass0_src2.ximg exists
[Wed Jul 11 22:05:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0102640201_pi300-10000_cl_pass0_src2.csv
[Wed Jul 11 22:05:29 2012] fullrun_mos2_xmm0102640201_pi300-10000_cl_pass0_src2_1.ximg exists
[Wed Jul 11 22:05:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0102640201_pi300-10000_cl_pass0_src2.csv
[Wed Jul 11 22:05:29 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0102640201_pi300-10000_cl_pass0_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0102640201_pi300-10000_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jul 11 22:05:29 2012] fullrun_mos2_xmm0102640201_pi300-10000_cl_pass0_tfrozen_src2.ximg exists
[Wed Jul 11 22:05:29 2012] fullrun_mos2_xmm0102640201_pi300-10000_cl_pass0_tfrozen_src2_1.ximg exists
[Wed Jul 11 22:05:29 2012] Fit fullrun_mos2_xmm0102640201_pi300-10000_cl_pass0_tfrozen_src2 appears to have run properly
[Wed Jul 11 22:05:40 2012] Warning, spatial fit 2 centroid is now closest to src. 15
[Wed Jul 11 22:05:40 2012] Vigneting correction estimate = 1.000000
[Wed Jul 11 22:05:40 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jul 11 22:05:40 2012] Assessing source extent using major
[Wed Jul 11 22:05:40 2012] Source does appear to be extended
[Wed Jul 11 22:05:40 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jul 11 22:53:39 2012] Using EEF radius (= 8.36 ")to estimate initial spatial extent for simple fitting
[Wed Jul 11 22:53:39 2012] Initial guess for spatial extent in simple fitting = 8.36"
[Wed Jul 11 22:53:39 2012] source mask rpix=1.9, npix_max = 23, mask sum = 21, frac = 0.895
[Wed Jul 11 22:53:39 2012] Giving source the simple spatial ID 2 for pass 1, mean size = 8.36"
[Wed Jul 11 23:17:51 2012] fullrun_mos2_xmm0102640201_pi300-10000_cl_pass1_src2.ximg exists
[Wed Jul 11 23:17:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0102640201_pi300-10000_cl_pass1_src2.csv
[Wed Jul 11 23:17:51 2012] fullrun_mos2_xmm0102640201_pi300-10000_cl_pass1_src2_1.ximg exists
[Wed Jul 11 23:17:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0102640201_pi300-10000_cl_pass1_src2.csv
[Wed Jul 11 23:17:51 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0102640201_pi300-10000_cl_pass1_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0102640201_pi300-10000_cl_pass1_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jul 11 23:17:52 2012] fullrun_mos2_xmm0102640201_pi300-10000_cl_pass1_tfrozen_src2.ximg exists
[Wed Jul 11 23:17:52 2012] fullrun_mos2_xmm0102640201_pi300-10000_cl_pass1_tfrozen_src2_1.ximg exists
[Wed Jul 11 23:17:52 2012] Fit fullrun_mos2_xmm0102640201_pi300-10000_cl_pass1_tfrozen_src2 appears to have run properly
[Wed Jul 11 23:18:04 2012] Warning: source 2 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 1 at 10.383541 pixels away
[Wed Jul 11 23:18:04 2012] Vigneting correction estimate = 1.000000
[Wed Jul 11 23:18:04 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jul 11 23:18:04 2012] Assessing source extent using major
[Wed Jul 11 23:18:04 2012] Source does appear to be extended
[Wed Jul 11 23:18:04 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jul 11 23:55:35 2012] XMMSAS src. selection expression = ellipse(24427.623016, 21518.808762, 652.500000, 652.500000, 0.000000, X, Y)
[Wed Jul 11 23:55:35 2012] Writing source region out to fullrun_mos2_xmm0102640201_pi300-10000_pass1_cl_src1_src.reg
[Wed Jul 11 23:55:35 2012] Extracting stamp from image fullrun_mos2_xmm0102640201_pi300-10000_cl_sm2.00.img.gz, (244, 210) - (319, 285)
[Wed Jul 11 23:55:35 2012] XMMSAS bgd. selection expression = annulus(24427.623016, 21518.808762, 1087.500000, 2175.000000, X, Y) && !ellipse(22949.853600, 22131.098800, 355.971210, 355.971210, 0.000000, X, Y) && !ellipse(25361.911620, 23562.600800, 622.115218, 221.949606, 86.169577, X, Y)
[Wed Jul 11 23:55:35 2012] Writing fullrun_mos2_xmm0102640201_pi300-10000_pass1_cl_src1.gif
[Wed Jul 11 23:55:50 2012] Mean detx,y = (1615.75, 3015.76) 
[Wed Jul 11 23:55:51 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Jul 11 23:55:59 2012] Binned source spectrum to 10 counts/bin
[Wed Jul 11 23:56:00 2012] Setting source spectrum file to fullrun_mos2_xmm0102640201_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Wed Jul 11 23:56:00 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0102640201_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Wed Jul 11 23:59:35 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Wed Jul 11 23:59:35 2012] rmf not generated due to insufficient counts
[Thu Jul 12 00:09:34 2012] Updating aperture counts using extracted products
[Thu Jul 12 00:09:34 2012] Error reading totcts from fullrun_mos2_xmm0102640201_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Thu Jul 12 00:09:34 2012] Calculating source flux in energy range 0.30-8.00
[Thu Jul 12 00:09:34 2012] Using photon index=1.80, rate=0.0318, arf fullrun_mos2_xmm0102640201_pi300-10000_pass1_cl_src1.arf
[Thu Jul 12 00:09:34 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jul 12 00:09:34 2012] Updating source flux to 4e-13
[Thu Jul 12 00:09:48 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Thu Jul 12 00:10:04 2012] xmm0102640201/analysis//spectral/fullrun_mos2_xmm0102640201_pi300-10000_pass1_cl_src1_pl.csv not found, spectral fit skipped or did not complete