[Wed Jul 11 20:56:30 2012] Detection parameters:
  Position = (282.7, 342.8) = 1 34 38.45 31 1 59.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 118.6 +/- 13.5
  Background counts = 6.0
  Rate = 0.008 +/- 0.0009

[Wed Jul 11 20:56:31 2012] Off-axis axis estimate = 3.41'
[Wed Jul 11 21:22:02 2012] Using EEF radius (= 8.14 ")to estimate initial spatial extent for simple fitting
[Wed Jul 11 21:22:02 2012] Initial guess for spatial extent in simple fitting = 8.14"
[Wed Jul 11 21:22:02 2012] source mask rpix=1.9, npix_max = 22, mask sum = 25, frac = 1.112
[Wed Jul 11 21:22:02 2012] Giving source the simple spatial ID 6 for pass 0, mean size = 8.14"
[Wed Jul 11 21:43:50 2012] fullrun_mos1_xmm0102640201_pi300-10000_cl_pass0_src6.ximg exists
[Wed Jul 11 21:43:50 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0102640201_pi300-10000_cl_pass0_src6.csv
[Wed Jul 11 21:43:50 2012] fullrun_mos1_xmm0102640201_pi300-10000_cl_pass0_src6_1.ximg exists
[Wed Jul 11 21:43:50 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0102640201_pi300-10000_cl_pass0_src6.csv
[Wed Jul 11 21:43:50 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0102640201_pi300-10000_cl_pass0_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0102640201_pi300-10000_cl_pass0_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jul 11 21:43:50 2012] fullrun_mos1_xmm0102640201_pi300-10000_cl_pass0_tfrozen_src6.ximg exists
[Wed Jul 11 21:43:50 2012] fullrun_mos1_xmm0102640201_pi300-10000_cl_pass0_tfrozen_src6_1.ximg exists
[Wed Jul 11 21:43:50 2012] Fit fullrun_mos1_xmm0102640201_pi300-10000_cl_pass0_tfrozen_src6 appears to have run properly
[Wed Jul 11 22:05:37 2012] Source 8 is offset by -3.670155 and -8.664584 pixels which is larger than
2 X fitted extent = 0.935182 x 0.935182, not incorporating fit results
[Wed Jul 11 22:05:37 2012] Vigneting correction estimate = 1.000000
[Wed Jul 11 22:05:37 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jul 11 22:05:37 2012] Assessing source extent using major
[Wed Jul 11 22:05:37 2012] Source does appear to be extended
[Wed Jul 11 22:05:37 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jul 11 22:29:08 2012] Using EEF radius (= 8.14 ")to estimate initial spatial extent for simple fitting
[Wed Jul 11 22:29:08 2012] Initial guess for spatial extent in simple fitting = 8.14"
[Wed Jul 11 22:29:08 2012] source mask rpix=1.9, npix_max = 22, mask sum = 25, frac = 1.112
[Wed Jul 11 22:29:08 2012] Giving source the simple spatial ID 6 for pass 1, mean size = 8.14"
[Wed Jul 11 22:53:38 2012] fullrun_mos1_xmm0102640201_pi300-10000_cl_pass1_src6.ximg exists
[Wed Jul 11 22:53:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0102640201_pi300-10000_cl_pass1_src6.csv
[Wed Jul 11 22:53:38 2012] fullrun_mos1_xmm0102640201_pi300-10000_cl_pass1_src6_1.ximg exists
[Wed Jul 11 22:53:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0102640201_pi300-10000_cl_pass1_src6.csv
[Wed Jul 11 22:53:38 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0102640201_pi300-10000_cl_pass1_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0102640201_pi300-10000_cl_pass1_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jul 11 22:53:38 2012] fullrun_mos1_xmm0102640201_pi300-10000_cl_pass1_tfrozen_src6.ximg exists
[Wed Jul 11 22:53:38 2012] fullrun_mos1_xmm0102640201_pi300-10000_cl_pass1_tfrozen_src6_1.ximg exists
[Wed Jul 11 22:53:38 2012] Fit fullrun_mos1_xmm0102640201_pi300-10000_cl_pass1_tfrozen_src6 appears to have run properly
[Wed Jul 11 23:18:01 2012] Spatial fit model total counts = 150.134000, observed total counts = 151.000000
[Wed Jul 11 23:18:01 2012] Offset between fit and detection position for source 8 = 0.165532 pixels
[Wed Jul 11 23:18:01 2012] 147.869400 total counts/ 75.128100 bgd. counts: snr = 8.392278
Spatial fit parameters:
  Offset between fit and detection position for source 8 = 0.165532 pixels
  Position = (282.5, 342.8) = 1 34 38.51 31 1 59.3
  Extent = 4.3 (3.5-5.1)", rotation angle = 0
  Source counts = 72.7 +/- 12.2
  Background counts = 75.1
  Rate = 0.004 +/- 0.0007
[Wed Jul 11 23:18:01 2012] Vigneting correction estimate = 1.000000
[Wed Jul 11 23:18:01 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jul 11 23:18:01 2012] Assessing source extent using major axis lower bound
[Wed Jul 11 23:18:01 2012] Source does appear to be extended
[Wed Jul 11 23:18:01 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jul 11 23:41:59 2012] XMMSAS src. selection expression = ellipse(24528.634800, 29771.940000, 257.806807, 257.806807, 0.000000, X, Y)
[Wed Jul 11 23:41:59 2012] Writing source region out to fullrun_mos1_xmm0102640201_pi300-10000_pass1_cl_src8_src.reg
[Wed Jul 11 23:41:59 2012] Extracting stamp from image fullrun_mos1_xmm0102640201_pi300-10000_cl_sm2.00.img.gz, (268, 328) - (297, 358)
[Wed Jul 11 23:41:59 2012] XMMSAS bgd. selection expression = annulus(24528.634800, 29771.940000, 429.678012, 859.356025, X, Y)
[Wed Jul 11 23:41:59 2012] Writing fullrun_mos1_xmm0102640201_pi300-10000_pass1_cl_src8.gif
[Wed Jul 11 23:43:09 2012] Mean detx,y = (-4388.01, 1448.77) 
[Wed Jul 11 23:43:09 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Jul 11 23:43:18 2012] Binned source spectrum to 10 counts/bin
[Wed Jul 11 23:43:18 2012] Setting source spectrum file to fullrun_mos1_xmm0102640201_pi300-10000_pass1_cl_src8_src_b10.pi.gz
[Wed Jul 11 23:43:18 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0102640201_pi300-10000_pass1_cl_src8_bgd.pi.gz
[Wed Jul 11 23:54:36 2012] Not generating rmf since there are only 72 counts
[Wed Jul 11 23:54:36 2012] rmf not generated due to insufficient counts
[Thu Jul 12 00:09:34 2012] Updating aperture counts using extracted products
[Thu Jul 12 00:09:34 2012] Error reading totcts from fullrun_mos1_xmm0102640201_pi300-10000_pass1_cl_src8_src_b10.pi.gz
[Thu Jul 12 00:09:34 2012] Calculating source flux in energy range 0.30-8.00
[Thu Jul 12 00:09:34 2012] Using photon index=1.80, rate=0.00429, arf fullrun_mos1_xmm0102640201_pi300-10000_pass1_cl_src8.arf
[Thu Jul 12 00:09:34 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jul 12 00:09:34 2012] Updating source flux to 7.2e-14
[Thu Jul 12 00:09:36 2012] Flag b found in src. 8 procflags, skipping spectral fitting
[Thu Jul 12 00:09:36 2012] Source 8 has fewer than 100.000000 counts, skipping spectral fitting