[Wed Jan 25 13:56:40 2012] Detection parameters:
  Position = (287.3, 304.9) = 1 33 47.71 30 41 9.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 135.1 +/- 19.9
  Background counts = 52.1
  Rate = 0.01 +/- 0.002

[Wed Jan 25 13:56:40 2012] Off-axis axis estimate = 0.93'
[Wed Jan 25 13:58:33 2012] Using EEF radius (= 6.90 ")to estimate initial spatial extent for simple fitting
[Wed Jan 25 13:58:33 2012] Initial guess for spatial extent in simple fitting = 6.90"
[Wed Jan 25 13:58:33 2012] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.920
[Wed Jan 25 13:58:33 2012] Giving source the simple spatial ID 29 for pass 0, mean size = 6.90"
[Wed Jan 25 15:51:14 2012] fullrun_pn_xmm0102640101_pi300-10000_cl_pass0_src29.ximg exists
[Wed Jan 25 15:51:14 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0102640101_pi300-10000_cl_pass0_src29.csv
[Wed Jan 25 15:51:14 2012] fullrun_pn_xmm0102640101_pi300-10000_cl_pass0_src29_1.ximg exists
[Wed Jan 25 15:51:14 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0102640101_pi300-10000_cl_pass0_src29.csv
[Wed Jan 25 15:51:14 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0102640101_pi300-10000_cl_pass0_src29_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0102640101_pi300-10000_cl_pass0_src29.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jan 25 15:51:15 2012] fullrun_pn_xmm0102640101_pi300-10000_cl_pass0_tfrozen_src29.ximg exists
[Wed Jan 25 15:51:15 2012] fullrun_pn_xmm0102640101_pi300-10000_cl_pass0_tfrozen_src29_1.ximg exists
[Wed Jan 25 15:51:15 2012] Fit fullrun_pn_xmm0102640101_pi300-10000_cl_pass0_tfrozen_src29 appears to have run properly
[Wed Jan 25 16:25:56 2012] Source 32 is offset by -6.024900 and 5.263487 pixels which is larger than
2 X fitted extent = 0.792561 x 0.792561, not incorporating fit results
[Wed Jan 25 16:25:56 2012] Vigneting correction estimate = 1.000000
[Wed Jan 25 16:25:56 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jan 25 16:25:56 2012] Assessing source extent using major
[Wed Jan 25 16:25:56 2012] Source does appear to be extended
[Wed Jan 25 16:25:56 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jan 25 16:26:07 2012] Using EEF radius (= 6.90 ")to estimate initial spatial extent for simple fitting
[Wed Jan 25 16:26:07 2012] Initial guess for spatial extent in simple fitting = 6.90"
[Wed Jan 25 16:26:07 2012] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.920
[Wed Jan 25 16:26:07 2012] Giving source the simple spatial ID 29 for pass 1, mean size = 6.90"
[Wed Jan 25 18:55:02 2012] fullrun_pn_xmm0102640101_pi300-10000_cl_pass1_src29.ximg exists
[Wed Jan 25 18:55:02 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0102640101_pi300-10000_cl_pass1_src29.csv
[Wed Jan 25 18:55:02 2012] fullrun_pn_xmm0102640101_pi300-10000_cl_pass1_src29_1.ximg exists
[Wed Jan 25 18:55:02 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0102640101_pi300-10000_cl_pass1_src29.csv
[Wed Jan 25 18:55:02 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0102640101_pi300-10000_cl_pass1_src29_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0102640101_pi300-10000_cl_pass1_src29.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jan 25 18:55:03 2012] fullrun_pn_xmm0102640101_pi300-10000_cl_pass1_tfrozen_src29.ximg exists
[Wed Jan 25 18:55:03 2012] fullrun_pn_xmm0102640101_pi300-10000_cl_pass1_tfrozen_src29_1.ximg exists
[Wed Jan 25 18:55:03 2012] Fit fullrun_pn_xmm0102640101_pi300-10000_cl_pass1_tfrozen_src29 appears to have run properly
[Wed Jan 25 19:15:56 2012] Warning: source 27 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 32 at 63.107010 pixels away
[Wed Jan 25 19:15:56 2012] Source 32 is offset by -6.024900 and 5.263487 pixels which is larger than
2 X fitted extent = 0.792561 x 0.792561, not incorporating fit results
[Wed Jan 25 19:15:56 2012] Vigneting correction estimate = 1.000000
[Wed Jan 25 19:15:56 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jan 25 19:15:56 2012] Assessing source extent using major
[Wed Jan 25 19:15:56 2012] Source does appear to be extended
[Wed Jan 25 19:15:56 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jan 25 19:16:07 2012] XMMSAS src. selection expression = ellipse(24947.955658, 26479.801361, 652.500000, 652.500000, 0.000000, X, Y)
[Wed Jan 25 19:16:07 2012] Writing source region out to fullrun_pn_xmm0102640101_pi300-10000_pass1_cl_src32_src.reg
[Wed Jan 25 19:16:07 2012] Extracting stamp from image fullrun_pn_xmm0102640101_pi300-10000_cl_sm2.00.img.gz, (250, 267) - (325, 342)
[Wed Jan 25 19:16:07 2012] XMMSAS bgd. selection expression = annulus(24947.955658, 26479.801361, 1087.500000, 2175.000000, X, Y) && !ellipse(24138.633272, 24717.170200, 1449.456042, 1449.456042, 0.000000, X, Y) && !ellipse(26826.213097, 30880.900180, 2776.656080, 386.943374, 113.044896, X, Y) && !ellipse(26327.293675, 29775.963331, 1288.144037, 361.035482, 115.420559, X, Y) && !ellipse(26281.992000, 29685.742000, 1041.416030, 1041.416030, 0.000000, X, Y) && !ellipse(26119.804400, 29244.347600, 1263.816036, 398.344811, 292.793000, X, Y) && !ellipse(25929.038000, 28899.592000, 877.496025, 877.496025, 0.000000, X, Y) && !ellipse(25502.226000, 27900.528000, 1132.864033, 1132.864033, 0.000000, X, Y) && !ellipse(25294.298920, 27351.213837, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26422.686371, 23747.800110, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23462.076477, 23699.112183, 870.000000, 870.000000, 0.000000, X, Y)
[Wed Jan 25 19:16:07 2012] Writing fullrun_pn_xmm0102640101_pi300-10000_pass1_cl_src32.gif
[Wed Jan 25 19:43:59 2012] Mean detx,y = (65.21, 1522.00) 
[Wed Jan 25 19:44:01 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Jan 25 19:44:17 2012] Binned source spectrum to 10 counts/bin
[Wed Jan 25 19:44:17 2012] Setting source spectrum file to fullrun_pn_xmm0102640101_pi300-10000_pass1_cl_src32_src_b10.pi.gz
[Wed Jan 25 19:44:17 2012] Setting bgd. spectrum file to fullrun_pn_xmm0102640101_pi300-10000_pass1_cl_src32_bgd.pi.gz
[Wed Jan 25 21:04:54 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Wed Jan 25 21:04:54 2012] rmf not generated due to insufficient counts
[Wed Jan 25 21:48:57 2012] Updating aperture counts using extracted products
[Wed Jan 25 21:48:57 2012] Error reading totcts from fullrun_pn_xmm0102640101_pi300-10000_pass1_cl_src32_src_b10.pi.gz
[Wed Jan 25 21:48:58 2012] Calculating source flux in energy range 0.30-8.00
[Wed Jan 25 21:48:58 2012] Using photon index=1.80, rate=0.0117, arf fullrun_pn_xmm0102640101_pi300-10000_pass1_cl_src32.arf
[Wed Jan 25 21:48:58 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jan 25 21:48:58 2012] Updating source flux to 3e-14
[Wed Jan 25 21:49:45 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting