[Wed Jan 25 13:56:40 2012] Detection parameters:
  Position = (296.7, 329.0) = 1 33 44.55 30 42 48.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 119.1 +/- 17.5
  Background counts = 47.8
  Rate = 0.01 +/- 0.002

[Wed Jan 25 13:56:40 2012] Off-axis axis estimate = 2.22'
[Wed Jan 25 13:58:33 2012] Using EEF radius (= 7.54 ")to estimate initial spatial extent for simple fitting
[Wed Jan 25 13:58:33 2012] Initial guess for spatial extent in simple fitting = 7.54"
[Wed Jan 25 13:58:33 2012] source mask rpix=1.7, npix_max = 19, mask sum = 20, frac = 1.003
[Wed Jan 25 13:58:33 2012] Giving source the simple spatial ID 25 for pass 0, mean size = 7.54"
[Wed Jan 25 15:51:14 2012] fullrun_pn_xmm0102640101_pi300-10000_cl_pass0_src25.ximg exists
[Wed Jan 25 15:51:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0102640101_pi300-10000_cl_pass0_src25.csv
[Wed Jan 25 15:51:14 2012] fullrun_pn_xmm0102640101_pi300-10000_cl_pass0_src25_1.ximg exists
[Wed Jan 25 15:51:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0102640101_pi300-10000_cl_pass0_src25.csv
[Wed Jan 25 15:51:14 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0102640101_pi300-10000_cl_pass0_src25_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0102640101_pi300-10000_cl_pass0_src25.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jan 25 15:51:15 2012] fullrun_pn_xmm0102640101_pi300-10000_cl_pass0_tfrozen_src25.ximg exists
[Wed Jan 25 15:51:15 2012] fullrun_pn_xmm0102640101_pi300-10000_cl_pass0_tfrozen_src25_1.ximg exists
[Wed Jan 25 15:51:15 2012] Fit fullrun_pn_xmm0102640101_pi300-10000_cl_pass0_tfrozen_src25 appears to have run properly
[Wed Jan 25 16:25:56 2012] Source 28 is offset by 7.019781 and -7.108664 pixels which is larger than
2 X fitted extent = 0.866460 x 0.866460, not incorporating fit results
[Wed Jan 25 16:25:56 2012] Vigneting correction estimate = 1.000000
[Wed Jan 25 16:25:56 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jan 25 16:25:56 2012] Assessing source extent using major
[Wed Jan 25 16:25:56 2012] Source does appear to be extended
[Wed Jan 25 16:25:56 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jan 25 16:25:56 2012] Source is confused with source 27
[Wed Jan 25 16:25:56 2012] Source is confused with source 29
[Wed Jan 25 16:26:07 2012] Using EEF radius (= 7.54 ")to estimate initial spatial extent for simple fitting
[Wed Jan 25 16:26:07 2012] Initial guess for spatial extent in simple fitting = 7.54"
[Wed Jan 25 16:26:07 2012] source mask rpix=1.7, npix_max = 19, mask sum = 20, frac = 1.003
[Wed Jan 25 16:26:07 2012] Giving source the simple spatial ID 25 for pass 1, mean size = 7.54"
[Wed Jan 25 18:55:02 2012] fullrun_pn_xmm0102640101_pi300-10000_cl_pass1_src25.ximg exists
[Wed Jan 25 18:55:02 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0102640101_pi300-10000_cl_pass1_src25.csv
[Wed Jan 25 18:55:02 2012] fullrun_pn_xmm0102640101_pi300-10000_cl_pass1_src25_1.ximg exists
[Wed Jan 25 18:55:02 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0102640101_pi300-10000_cl_pass1_src25.csv
[Wed Jan 25 18:55:02 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0102640101_pi300-10000_cl_pass1_src25_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0102640101_pi300-10000_cl_pass1_src25.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jan 25 18:55:03 2012] fullrun_pn_xmm0102640101_pi300-10000_cl_pass1_tfrozen_src25.ximg exists
[Wed Jan 25 18:55:03 2012] fullrun_pn_xmm0102640101_pi300-10000_cl_pass1_tfrozen_src25_1.ximg exists
[Wed Jan 25 18:55:03 2012] Fit fullrun_pn_xmm0102640101_pi300-10000_cl_pass1_tfrozen_src25 appears to have run properly
[Wed Jan 25 19:15:56 2012] Spatial fit model total counts = 391.883000, observed total counts = 391.000000
[Wed Jan 25 19:15:56 2012] Offset between fit and detection position for source 28 = 4.195979 pixels
[Wed Jan 25 19:15:56 2012] Warning, changing simple spatial fit ID from 25 to 23
[Wed Jan 25 19:15:56 2012] 270.458800 total counts/ 172.145000 bgd. counts: snr = 7.493199
Spatial fit parameters:
  Offset between fit and detection position for source 28 = 4.195979 pixels
  Position = (298.6, 332.7) = 1 33 43.91 30 43 6.3
  Extent = 11.0 (8.2-15.2)", rotation angle = 0
  Source counts = 98.3 +/- 16.4
  Background counts = 172.1
  Rate = 0.01 +/- 0.002
[Wed Jan 25 19:15:56 2012] Vigneting correction estimate = 1.000000
[Wed Jan 25 19:15:56 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jan 25 19:15:56 2012] Assessing source extent using major axis lower bound
[Wed Jan 25 19:15:56 2012] Source does appear to be extended
[Wed Jan 25 19:15:56 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jan 25 19:16:07 2012] XMMSAS src. selection expression = ellipse(25929.038000, 28899.592000, 658.122019, 658.122019, 0.000000, X, Y)
[Wed Jan 25 19:16:07 2012] Writing source region out to fullrun_pn_xmm0102640101_pi300-10000_pass1_cl_src28_src.reg
[Wed Jan 25 19:16:07 2012] Extracting stamp from image fullrun_pn_xmm0102640101_pi300-10000_cl_sm2.00.img.gz, (261, 295) - (336, 371)
[Wed Jan 25 19:16:07 2012] XMMSAS bgd. selection expression = annulus(25929.038000, 28899.592000, 1096.870032, 2193.740063, X, Y) && !ellipse(27300.960790, 32043.108442, 1846.064053, 455.355710, 112.808185, X, Y) && !ellipse(27422.772000, 32330.570000, 1319.112038, 1319.112038, 0.000000, X, Y) && !ellipse(26826.213097, 30880.900180, 2776.656080, 386.943374, 113.044896, X, Y) && !ellipse(26769.808000, 30957.880000, 1420.368041, 1420.368041, 0.000000, X, Y) && !ellipse(26327.293675, 29775.963331, 1288.144037, 361.035482, 115.420559, X, Y) && !ellipse(26281.992000, 29685.742000, 1041.416030, 1041.416030, 0.000000, X, Y) && !ellipse(26119.804400, 29244.347600, 1263.816036, 398.344811, 292.793000, X, Y) && !ellipse(25502.226000, 27900.528000, 1132.864033, 1132.864033, 0.000000, X, Y) && !ellipse(25294.298920, 27351.213837, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24947.955658, 26479.801361, 870.000000, 870.000000, 0.000000, X, Y)
[Wed Jan 25 19:16:07 2012] Writing fullrun_pn_xmm0102640101_pi300-10000_pass1_cl_src28.gif
[Wed Jan 25 19:42:15 2012] Mean detx,y = (58.43, 4185.31) 
[Wed Jan 25 19:42:16 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Jan 25 19:42:31 2012] Binned source spectrum to 10 counts/bin
[Wed Jan 25 19:42:32 2012] Setting source spectrum file to fullrun_pn_xmm0102640101_pi300-10000_pass1_cl_src28_src_b10.pi.gz
[Wed Jan 25 19:42:32 2012] Setting bgd. spectrum file to fullrun_pn_xmm0102640101_pi300-10000_pass1_cl_src28_bgd.pi.gz
[Wed Jan 25 21:02:32 2012] Not generating rmf since there are only 98 counts
[Wed Jan 25 21:02:32 2012] rmf not generated due to insufficient counts
[Wed Jan 25 21:48:57 2012] Updating aperture counts using extracted products
[Wed Jan 25 21:48:57 2012] Error reading totcts from fullrun_pn_xmm0102640101_pi300-10000_pass1_cl_src28_src_b10.pi.gz
[Wed Jan 25 21:48:58 2012] Calculating source flux in energy range 0.30-8.00
[Wed Jan 25 21:48:58 2012] Using photon index=1.80, rate=0.0119, arf fullrun_pn_xmm0102640101_pi300-10000_pass1_cl_src28.arf
[Wed Jan 25 21:48:58 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jan 25 21:48:58 2012] Updating source flux to 3.8e-14
[Wed Jan 25 21:49:45 2012] Flag b found in src. 28 procflags, skipping spectral fitting
[Wed Jan 25 21:49:45 2012] Flag c found in src. 28 procflags, skipping spectral fitting
[Wed Jan 25 21:49:45 2012] Source 28 has fewer than 100.000000 counts, skipping spectral fitting