[Wed Jan 25 13:56:39 2012] Detection parameters:
  Position = (278.0, 284.8) = 1 33 50.85 30 39 37.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 64028.0 +/- 301.5
  Background counts = 54.0
  Rate = 6 +/- 0.03

[Wed Jan 25 13:56:40 2012] Off-axis axis estimate = 1.78'
[Wed Jan 25 13:58:33 2012] Using EEF radius (= 7.32 ")to estimate initial spatial extent for simple fitting
[Wed Jan 25 13:58:33 2012] Initial guess for spatial extent in simple fitting = 7.32"
[Wed Jan 25 13:58:33 2012] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.840
[Wed Jan 25 13:58:33 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.32"
[Wed Jan 25 15:51:14 2012] fullrun_pn_xmm0102640101_pi300-10000_cl_pass0_src1.ximg exists
[Wed Jan 25 15:51:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0102640101_pi300-10000_cl_pass0_src1.csv
[Wed Jan 25 15:51:14 2012] fullrun_pn_xmm0102640101_pi300-10000_cl_pass0_src1_1.ximg exists
[Wed Jan 25 15:51:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0102640101_pi300-10000_cl_pass0_src1.csv
[Wed Jan 25 15:51:14 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0102640101_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0102640101_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jan 25 15:51:14 2012] fullrun_pn_xmm0102640101_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Wed Jan 25 15:51:14 2012] fullrun_pn_xmm0102640101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Wed Jan 25 15:51:14 2012] Fit fullrun_pn_xmm0102640101_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Wed Jan 25 16:25:56 2012] Spatial fit model total counts = 41321.100000, observed total counts = 41343.000000
[Wed Jan 25 16:25:56 2012] Offset between fit and detection position for source 1 = 0.154648 pixels
[Wed Jan 25 16:25:56 2012] 41322.140000 total counts/ 7922.840000 bgd. counts: snr = 375.229454
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.154648 pixels
  Position = (278.0, 284.7) = 1 33 50.85 30 39 37.2
  Extent = 6.0 (6.0-6.1)", rotation angle = 0
  Source counts = 33399.3 +/- 203.3
  Background counts = 7922.8
  Rate = 4 +/- 0.02
[Wed Jan 25 16:25:56 2012] Vigneting correction estimate = 1.000000
[Wed Jan 25 16:25:56 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jan 25 16:25:56 2012] Assessing source extent using major axis lower bound
[Wed Jan 25 16:25:56 2012] Source does appear to be extended
[Wed Jan 25 16:25:56 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jan 25 16:26:07 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Jan 25 16:26:07 2012] Initial guess for spatial extent in simple fitting = 6.04"
[Wed Jan 25 16:26:07 2012] source mask rpix=1.4, npix_max = 14, mask sum = 16, frac = 1.123
[Wed Jan 25 16:26:07 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 6.04"
[Wed Jan 25 18:55:02 2012] fullrun_pn_xmm0102640101_pi300-10000_cl_pass1_src1.ximg exists
[Wed Jan 25 18:55:02 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0102640101_pi300-10000_cl_pass1_src1.csv
[Wed Jan 25 18:55:02 2012] fullrun_pn_xmm0102640101_pi300-10000_cl_pass1_src1_1.ximg exists
[Wed Jan 25 18:55:02 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0102640101_pi300-10000_cl_pass1_src1.csv
[Wed Jan 25 18:55:02 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0102640101_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0102640101_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jan 25 18:55:02 2012] fullrun_pn_xmm0102640101_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Wed Jan 25 18:55:02 2012] fullrun_pn_xmm0102640101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Wed Jan 25 18:55:02 2012] Fit fullrun_pn_xmm0102640101_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Wed Jan 25 19:15:56 2012] Spatial fit model total counts = 41366.400000, observed total counts = 41343.000000
[Wed Jan 25 19:15:56 2012] Offset between fit and detection position for source 1 = 0.000770 pixels
[Wed Jan 25 19:15:56 2012] 41367.850000 total counts/ 7942.750000 bgd. counts: snr = 375.048358
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.000770 pixels
  Position = (278.0, 284.7) = 1 33 50.85 30 39 37.2
  Extent = 6.0 (6.0-6.1)", rotation angle = 0
  Source counts = 33425.1 +/- 203.4
  Background counts = 7942.8
  Rate = 4 +/- 0.02
[Wed Jan 25 19:15:56 2012] Vigneting correction estimate = 1.000000
[Wed Jan 25 19:15:56 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jan 25 19:15:56 2012] Assessing source extent using major axis lower bound
[Wed Jan 25 19:15:56 2012] Source does appear to be extended
[Wed Jan 25 19:15:56 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jan 25 19:16:07 2012] Counts = 33425.100000, rescaling region sizes by 3.000000
[Wed Jan 25 19:16:07 2012] XMMSAS src. selection expression = ellipse(24138.633272, 24717.170200, 1087.092031, 1087.092031, 0.000000, X, Y)
[Wed Jan 25 19:16:07 2012] Writing source region out to fullrun_pn_xmm0102640101_pi300-10000_pass1_cl_src1_src.reg
[Wed Jan 25 19:16:07 2012] Extracting stamp from image fullrun_pn_xmm0102640101_pi300-10000_cl_sm2.00.img.gz, (216, 222) - (340, 347)
[Wed Jan 25 19:16:07 2012] XMMSAS bgd. selection expression = annulus(24138.633272, 24717.170200, 5435.460156, 10870.920313, X, Y) && !ellipse(30991.450500, 30033.255600, 408.674412, 408.674412, 0.000000, X, Y) && !ellipse(34248.759583, 23621.250793, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29255.196411, 17458.121994, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26512.057312, 15989.325272, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23144.840302, 17076.558441, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29394.358000, 36813.516000, 2188.296063, 2188.296063, 0.000000, X, Y) && !ellipse(29106.660000, 36149.818000, 1380.352040, 1380.352040, 0.000000, X, Y) && !ellipse(28838.189545, 35619.413147, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28685.878479, 35195.505859, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28350.656000, 34544.422000, 1673.856048, 1673.856048, 0.000000, X, Y) && !ellipse(28032.178000, 34018.192000, 1628.768047, 1628.768047, 0.000000, X, Y) && !ellipse(13294.347076, 33543.992676, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27722.698000, 33093.856000, 1552.328045, 1552.328045, 0.000000, X, Y) && !ellipse(27300.960790, 32043.108442, 1846.064053, 455.355710, 112.808185, X, Y) && !ellipse(29694.155060, 31339.949310, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27422.772000, 32330.570000, 1319.112038, 1319.112038, 0.000000, X, Y) && !ellipse(26826.213097, 30880.900180, 2776.656080, 386.943374, 113.044896, X, Y) && !ellipse(26769.808000, 30957.880000, 1420.368041, 1420.368041, 0.000000, X, Y) && !ellipse(26327.293675, 29775.963331, 1288.144037, 361.035482, 115.420559, X, Y) && !ellipse(26281.992000, 29685.742000, 1041.416030, 1041.416030, 0.000000, X, Y) && !ellipse(26119.804400, 29244.347600, 1263.816036, 398.344811, 292.793000, X, Y) && !ellipse(25929.038000, 28899.592000, 877.496025, 877.496025, 0.000000, X, Y) && !ellipse(25502.226000, 27900.528000, 1132.864033, 1132.864033, 0.000000, X, Y) && !ellipse(19021.557540, 28064.008600, 563.659216, 563.659216, 0.000000, X, Y) && !ellipse(25294.298920, 27351.213837, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24947.955658, 26479.801361, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34361.019600, 24773.731200, 529.800015, 529.800015, 0.000000, X, Y) && !ellipse(26422.686371, 23747.800110, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23462.076477, 23699.112183, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25246.240234, 22587.841705, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19199.301400, 15998.427200, 545.383216, 545.383216, 0.000000, X, Y) && !ellipse(21467.169769, 15152.465347, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21182.108566, 13305.699982, 870.000000, 870.000000, 0.000000, X, Y)
[Wed Jan 25 19:16:07 2012] Writing fullrun_pn_xmm0102640101_pi300-10000_pass1_cl_src1.gif
[Wed Jan 25 19:16:18 2012] Mean detx,y = (97.93, -319.54) 
[Wed Jan 25 19:16:22 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Jan 25 19:20:46 2012] Binned source spectrum to 10 counts/bin
[Wed Jan 25 19:20:46 2012] Setting source spectrum file to fullrun_pn_xmm0102640101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Wed Jan 25 19:20:46 2012] Setting bgd. spectrum file to fullrun_pn_xmm0102640101_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Wed Jan 25 21:48:57 2012] Updating aperture counts using extracted products
[Wed Jan 25 21:48:57 2012] Error reading totcts from fullrun_pn_xmm0102640101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Wed Jan 25 21:48:58 2012] Calculating source flux in energy range 0.30-8.00
[Wed Jan 25 21:48:58 2012] Using photon index=1.80, rate=4.05, arf fullrun_pn_xmm0102640101_pi300-10000_pass1_cl_src1.arf
[Wed Jan 25 21:48:58 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jan 25 21:48:58 2012] Updating source flux to 9.7e-12
[Wed Jan 25 21:51:04 2012] Reading fit data from xmm0102640101/analysis//spectral/fullrun_pn_xmm0102640101_pi300-10000_pass1_cl_src1_pl.csv
[Wed Jan 25 21:51:04 2012] Spectral fit parameter nH value = 2.56119e+21
[Wed Jan 25 21:51:04 2012] Spectral fit parameter PhoIndex value = 2.35619
[Wed Jan 25 21:51:04 2012] Failed to get F(0.3-8.0) from xmm0102640101/analysis//spectral/fullrun_pn_xmm0102640101_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Wed Jan 25 21:51:04 2012] Calculating source flux in energy range 0.30-8.00
[Wed Jan 25 21:51:04 2012] Using Nh = 2.6e+21, photon index=2.36, rate=4.05, arf fullrun_pn_xmm0102640101_pi300-10000_pass1_cl_src1.arf
[Wed Jan 25 21:51:04 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jan 25 21:51:04 2012] Updating source flux to 1.1e-11