[Wed Jan 25 13:57:18 2012] Detection parameters:
  Position = (277.9, 284.9) = 1 33 50.87 30 39 38.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 26459.2 +/- 192.8
  Background counts = 13.9
  Rate = 2 +/- 0.02

[Wed Jan 25 13:57:18 2012] Off-axis axis estimate = 1.78'
[Wed Jan 25 16:10:47 2012] Using EEF radius (= 7.32 ")to estimate initial spatial extent for simple fitting
[Wed Jan 25 16:10:47 2012] Initial guess for spatial extent in simple fitting = 7.32"
[Wed Jan 25 16:10:47 2012] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.840
[Wed Jan 25 16:10:47 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.32"
[Wed Jan 25 16:25:48 2012] fullrun_mos2_xmm0102640101_pi300-10000_cl_pass0_src1.ximg exists
[Wed Jan 25 16:25:48 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0102640101_pi300-10000_cl_pass0_src1.csv
[Wed Jan 25 16:25:48 2012] fullrun_mos2_xmm0102640101_pi300-10000_cl_pass0_src1_1.ximg exists
[Wed Jan 25 16:25:48 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0102640101_pi300-10000_cl_pass0_src1.csv
[Wed Jan 25 16:25:48 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0102640101_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0102640101_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jan 25 16:25:48 2012] fullrun_mos2_xmm0102640101_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Wed Jan 25 16:25:48 2012] fullrun_mos2_xmm0102640101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Wed Jan 25 16:25:48 2012] Fit fullrun_mos2_xmm0102640101_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Wed Jan 25 16:25:59 2012] Spatial fit model total counts = 21380.500000, observed total counts = 21348.000000
[Wed Jan 25 16:25:59 2012] Offset between fit and detection position for source 1 = 0.048105 pixels
[Wed Jan 25 16:25:59 2012] 21424.990000 total counts/ 4138.190000 bgd. counts: snr = 268.725818
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.048105 pixels
  Position = (277.9, 284.8) = 1 33 50.87 30 39 38.0
  Extent = 5.4 (5.3-5.5)", rotation angle = 0
  Source counts = 17286.8 +/- 146.4
  Background counts = 4138.2
  Rate = 1 +/- 0.01
[Wed Jan 25 16:25:59 2012] Vigneting correction estimate = 1.000000
[Wed Jan 25 16:25:59 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jan 25 16:25:59 2012] Assessing source extent using major axis lower bound
[Wed Jan 25 16:25:59 2012] Source does appear to be extended
[Wed Jan 25 16:25:59 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jan 25 19:04:13 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Jan 25 19:04:13 2012] Initial guess for spatial extent in simple fitting = 5.40"
[Wed Jan 25 19:04:13 2012] source mask rpix=1.2, npix_max = 12, mask sum = 16, frac = 1.318
[Wed Jan 25 19:04:13 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 5.40"
[Wed Jan 25 19:15:47 2012] fullrun_mos2_xmm0102640101_pi300-10000_cl_pass1_src1.ximg exists
[Wed Jan 25 19:15:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0102640101_pi300-10000_cl_pass1_src1.csv
[Wed Jan 25 19:15:47 2012] fullrun_mos2_xmm0102640101_pi300-10000_cl_pass1_src1_1.ximg exists
[Wed Jan 25 19:15:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0102640101_pi300-10000_cl_pass1_src1.csv
[Wed Jan 25 19:15:47 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0102640101_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0102640101_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jan 25 19:15:47 2012] fullrun_mos2_xmm0102640101_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Wed Jan 25 19:15:47 2012] fullrun_mos2_xmm0102640101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Wed Jan 25 19:15:47 2012] Fit fullrun_mos2_xmm0102640101_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Wed Jan 25 19:15:59 2012] Spatial fit model total counts = 21238.000000, observed total counts = 21238.000000
[Wed Jan 25 19:15:59 2012] Offset between fit and detection position for source 1 = 0.015227 pixels
[Wed Jan 25 19:15:59 2012] 21434.540000 total counts/ 4302.740000 bgd. counts: snr = 261.174303
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.015227 pixels
  Position = (277.9, 284.8) = 1 33 50.87 30 39 37.9
  Extent = 5.3 (5.3-5.4)", rotation angle = 0
  Source counts = 17131.8 +/- 146.4
  Background counts = 4302.7
  Rate = 1 +/- 0.01
[Wed Jan 25 19:15:59 2012] Vigneting correction estimate = 1.000000
[Wed Jan 25 19:15:59 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jan 25 19:15:59 2012] Assessing source extent using major axis lower bound
[Wed Jan 25 19:15:59 2012] Source does appear to be extended
[Wed Jan 25 19:15:59 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jan 25 21:33:24 2012] Counts = 17131.800000, rescaling region sizes by 3.000000
[Wed Jan 25 21:33:24 2012] XMMSAS src. selection expression = ellipse(24131.470600, 24732.361060, 962.474428, 962.474428, 0.000000, X, Y)
[Wed Jan 25 21:33:24 2012] Writing source region out to fullrun_mos2_xmm0102640101_pi300-10000_pass1_cl_src1_src.reg
[Wed Jan 25 21:33:24 2012] Extracting stamp from image fullrun_mos2_xmm0102640101_pi300-10000_cl_sm2.00.img.gz, (223, 230) - (333, 340)
[Wed Jan 25 21:33:24 2012] XMMSAS bgd. selection expression = annulus(24131.470600, 24732.361060, 4812.372138, 9624.744277, X, Y) && !ellipse(30922.314078, 30063.662000, 494.948014, 494.948014, 0.000000, X, Y) && !ellipse(34235.468506, 23626.919281, 870.000000, 870.000000, 0.000000, X, Y)
[Wed Jan 25 21:33:24 2012] Writing fullrun_mos2_xmm0102640101_pi300-10000_pass1_cl_src1.gif
[Wed Jan 25 21:33:27 2012] Mean detx,y = (48.93, 171.28) 
[Wed Jan 25 21:33:29 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Jan 25 21:36:34 2012] Binned source spectrum to 10 counts/bin
[Wed Jan 25 21:36:35 2012] Setting source spectrum file to fullrun_mos2_xmm0102640101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Wed Jan 25 21:36:35 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0102640101_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Wed Jan 25 21:48:58 2012] Updating aperture counts using extracted products
[Wed Jan 25 21:48:58 2012] Error reading totcts from fullrun_mos2_xmm0102640101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Wed Jan 25 21:48:58 2012] Calculating source flux in energy range 0.30-8.00
[Wed Jan 25 21:48:58 2012] Using photon index=1.80, rate=1.48, arf fullrun_mos2_xmm0102640101_pi300-10000_pass1_cl_src1.arf
[Wed Jan 25 21:48:58 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jan 25 21:48:58 2012] Updating source flux to 1.6e-11
[Wed Jan 25 21:49:45 2012] Reading fit data from xmm0102640101/analysis//spectral/fullrun_mos2_xmm0102640101_pi300-10000_pass1_cl_src1_pl.csv
[Wed Jan 25 21:49:45 2012] Spectral fit parameter nH value = 2.65023e+21
[Wed Jan 25 21:49:45 2012] Spectral fit parameter PhoIndex value = 2.34148
[Wed Jan 25 21:49:45 2012] Failed to get F(0.3-8.0) from xmm0102640101/analysis//spectral/fullrun_mos2_xmm0102640101_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Wed Jan 25 21:49:45 2012] Calculating source flux in energy range 0.30-8.00
[Wed Jan 25 21:49:45 2012] Using Nh = 2.7e+21, photon index=2.34, rate=1.48, arf fullrun_mos2_xmm0102640101_pi300-10000_pass1_cl_src1.arf
[Wed Jan 25 21:49:45 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jan 25 21:49:45 2012] Updating source flux to 1.5e-11