[Wed Jan 25 13:56:59 2012] Detection parameters:
  Position = (265.4, 196.3) = 1 33 55.08 30 33 13.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 55.5 +/- 10.3
  Background counts = 13.9
  Rate = 0.007 +/- 0.001

[Wed Jan 25 13:56:59 2012] Off-axis axis estimate = 7.78'
[Wed Jan 25 15:51:16 2012] Using EEF radius (= 10.32 ")to estimate initial spatial extent for simple fitting
[Wed Jan 25 15:51:16 2012] Initial guess for spatial extent in simple fitting = 10.32"
[Wed Jan 25 15:51:16 2012] source mask rpix=2.4, npix_max = 33, mask sum = 29, frac = 0.879
[Wed Jan 25 15:51:16 2012] Giving source the simple spatial ID 8 for pass 0, mean size = 10.32"
[Wed Jan 25 16:10:47 2012] fullrun_mos1_xmm0102640101_pi300-10000_cl_pass0_src8.ximg exists
[Wed Jan 25 16:10:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0102640101_pi300-10000_cl_pass0_src8.csv
[Wed Jan 25 16:10:47 2012] fullrun_mos1_xmm0102640101_pi300-10000_cl_pass0_src8_1.ximg exists
[Wed Jan 25 16:10:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0102640101_pi300-10000_cl_pass0_src8.csv
[Wed Jan 25 16:10:47 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0102640101_pi300-10000_cl_pass0_src8_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0102640101_pi300-10000_cl_pass0_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jan 25 16:10:47 2012] fullrun_mos1_xmm0102640101_pi300-10000_cl_pass0_tfrozen_src8.ximg exists
[Wed Jan 25 16:10:47 2012] fullrun_mos1_xmm0102640101_pi300-10000_cl_pass0_tfrozen_src8_1.ximg exists
[Wed Jan 25 16:10:47 2012] Fit fullrun_mos1_xmm0102640101_pi300-10000_cl_pass0_tfrozen_src8 appears to have run properly
[Wed Jan 25 16:25:58 2012] Spatial fit model total counts = 130.999000, observed total counts = 131.000000
[Wed Jan 25 16:25:58 2012] Offset between fit and detection position for source 9 = 0.902911 pixels
[Wed Jan 25 16:25:58 2012] 127.118100 total counts/ 76.452400 bgd. counts: snr = 5.794534
Spatial fit parameters:
  Offset between fit and detection position for source 9 = 0.902911 pixels
  Position = (266.3, 196.1) = 1 33 54.78 30 33 12.1
  Extent = 7.1 (4.9-9.1)", rotation angle = 0
  Source counts = 50.7 +/- 11.3
  Background counts = 76.5
  Rate = 0.004 +/- 0.001
[Wed Jan 25 16:25:58 2012] Vigneting correction estimate = 1.000000
[Wed Jan 25 16:25:58 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jan 25 16:25:58 2012] Assessing source extent using major axis lower bound
[Wed Jan 25 16:25:58 2012] Source does appear to be extended
[Wed Jan 25 16:25:58 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jan 25 18:55:04 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Jan 25 18:55:04 2012] Initial guess for spatial extent in simple fitting = 7.05"
[Wed Jan 25 18:55:04 2012] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.889
[Wed Jan 25 18:55:04 2012] Giving source the simple spatial ID 7 for pass 1, mean size = 7.05"
[Wed Jan 25 19:04:13 2012] fullrun_mos1_xmm0102640101_pi300-10000_cl_pass1_src7.ximg exists
[Wed Jan 25 19:04:13 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0102640101_pi300-10000_cl_pass1_src7.csv
[Wed Jan 25 19:04:13 2012] fullrun_mos1_xmm0102640101_pi300-10000_cl_pass1_src7_1.ximg exists
[Wed Jan 25 19:04:13 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0102640101_pi300-10000_cl_pass1_src7.csv
[Wed Jan 25 19:04:13 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0102640101_pi300-10000_cl_pass1_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0102640101_pi300-10000_cl_pass1_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jan 25 19:04:13 2012] fullrun_mos1_xmm0102640101_pi300-10000_cl_pass1_tfrozen_src7.ximg exists
[Wed Jan 25 19:04:13 2012] fullrun_mos1_xmm0102640101_pi300-10000_cl_pass1_tfrozen_src7_1.ximg exists
[Wed Jan 25 19:04:13 2012] Fit fullrun_mos1_xmm0102640101_pi300-10000_cl_pass1_tfrozen_src7 appears to have run properly
[Wed Jan 25 19:15:58 2012] Warning, spatial fit 7 centroid is now closest to src. 12
[Wed Jan 25 19:15:58 2012] Vigneting correction estimate = 1.000000
[Wed Jan 25 19:15:58 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jan 25 19:15:58 2012] Assessing source extent using major axis lower bound
[Wed Jan 25 19:15:58 2012] Source does appear to be extended
[Wed Jan 25 19:15:58 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jan 25 19:15:58 2012] Deleting source due to low Poisson probability 0.9