[Wed Jan 25 13:56:59 2012] Detection parameters:
  Position = (277.8, 284.9) = 1 33 50.90 30 39 38.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 26482.6 +/- 193.5
  Background counts = 13.5
  Rate = 2 +/- 0.02

[Wed Jan 25 13:56:59 2012] Off-axis axis estimate = 1.79'
[Wed Jan 25 15:51:16 2012] Using EEF radius (= 7.32 ")to estimate initial spatial extent for simple fitting
[Wed Jan 25 15:51:16 2012] Initial guess for spatial extent in simple fitting = 7.32"
[Wed Jan 25 15:51:16 2012] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.839
[Wed Jan 25 15:51:16 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.32"
[Wed Jan 25 16:10:46 2012] fullrun_mos1_xmm0102640101_pi300-10000_cl_pass0_src1.ximg exists
[Wed Jan 25 16:10:46 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0102640101_pi300-10000_cl_pass0_src1.csv
[Wed Jan 25 16:10:46 2012] fullrun_mos1_xmm0102640101_pi300-10000_cl_pass0_src1_1.ximg exists
[Wed Jan 25 16:10:46 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0102640101_pi300-10000_cl_pass0_src1.csv
[Wed Jan 25 16:10:46 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0102640101_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0102640101_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jan 25 16:10:47 2012] fullrun_mos1_xmm0102640101_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Wed Jan 25 16:10:47 2012] fullrun_mos1_xmm0102640101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Wed Jan 25 16:10:47 2012] Fit fullrun_mos1_xmm0102640101_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Wed Jan 25 16:25:58 2012] Spatial fit model total counts = 21478.000000, observed total counts = 21478.000000
[Wed Jan 25 16:25:58 2012] Offset between fit and detection position for source 1 = 0.104896 pixels
[Wed Jan 25 16:25:58 2012] 21436.360000 total counts/ 4339.360000 bgd. counts: snr = 259.541656
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.104896 pixels
  Position = (277.9, 284.8) = 1 33 50.89 30 39 37.6
  Extent = 5.5 (5.4-5.5)", rotation angle = 0
  Source counts = 17097.0 +/- 146.4
  Background counts = 4339.4
  Rate = 1 +/- 0.01
[Wed Jan 25 16:25:58 2012] Vigneting correction estimate = 1.000000
[Wed Jan 25 16:25:58 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jan 25 16:25:58 2012] Assessing source extent using major axis lower bound
[Wed Jan 25 16:25:58 2012] Source does appear to be extended
[Wed Jan 25 16:25:58 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jan 25 18:55:04 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Jan 25 18:55:04 2012] Initial guess for spatial extent in simple fitting = 5.46"
[Wed Jan 25 18:55:04 2012] source mask rpix=1.3, npix_max = 12, mask sum = 16, frac = 1.297
[Wed Jan 25 18:55:04 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 5.46"
[Wed Jan 25 19:04:13 2012] fullrun_mos1_xmm0102640101_pi300-10000_cl_pass1_src1.ximg exists
[Wed Jan 25 19:04:13 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0102640101_pi300-10000_cl_pass1_src1.csv
[Wed Jan 25 19:04:13 2012] fullrun_mos1_xmm0102640101_pi300-10000_cl_pass1_src1_1.ximg exists
[Wed Jan 25 19:04:13 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0102640101_pi300-10000_cl_pass1_src1.csv
[Wed Jan 25 19:04:13 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0102640101_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0102640101_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jan 25 19:04:13 2012] fullrun_mos1_xmm0102640101_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Wed Jan 25 19:04:13 2012] fullrun_mos1_xmm0102640101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Wed Jan 25 19:04:13 2012] Fit fullrun_mos1_xmm0102640101_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Wed Jan 25 19:15:58 2012] Spatial fit model total counts = 21410.000000, observed total counts = 21411.000000
[Wed Jan 25 19:15:58 2012] Offset between fit and detection position for source 1 = 0.022222 pixels
[Wed Jan 25 19:15:58 2012] 21587.730000 total counts/ 4577.630000 bgd. counts: snr = 251.412301
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.022222 pixels
  Position = (277.9, 284.7) = 1 33 50.90 30 39 37.5
  Extent = 5.4 (5.4-5.5)", rotation angle = 0
  Source counts = 17010.1 +/- 146.9
  Background counts = 4577.6
  Rate = 1 +/- 0.01
[Wed Jan 25 19:15:58 2012] Vigneting correction estimate = 1.000000
[Wed Jan 25 19:15:58 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jan 25 19:15:58 2012] Assessing source extent using major axis lower bound
[Wed Jan 25 19:15:58 2012] Source does appear to be extended
[Wed Jan 25 19:15:58 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jan 25 21:10:30 2012] Counts = 17010.100000, rescaling region sizes by 3.000000
[Wed Jan 25 21:10:30 2012] XMMSAS src. selection expression = ellipse(24125.295600, 24724.458800, 976.332654, 976.332654, 0.000000, X, Y)
[Wed Jan 25 21:10:30 2012] Writing source region out to fullrun_mos1_xmm0102640101_pi300-10000_pass1_cl_src1_src.reg
[Wed Jan 25 21:10:30 2012] Extracting stamp from image fullrun_mos1_xmm0102640101_pi300-10000_cl_sm2.00.img.gz, (222, 229) - (334, 341)
[Wed Jan 25 21:10:30 2012] XMMSAS bgd. selection expression = annulus(24125.295600, 24724.458800, 4881.663272, 9763.326544, X, Y) && !ellipse(30975.566000, 30059.538800, 621.937618, 444.186413, 57.161490, X, Y) && !ellipse(34246.550598, 23626.061707, 870.000000, 870.000000, 0.000000, X, Y)
[Wed Jan 25 21:10:30 2012] Writing fullrun_mos1_xmm0102640101_pi300-10000_pass1_cl_src1.gif
[Wed Jan 25 21:10:33 2012] Mean detx,y = (395.60, -202.11) 
[Wed Jan 25 21:10:34 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Jan 25 21:13:43 2012] Binned source spectrum to 10 counts/bin
[Wed Jan 25 21:13:43 2012] Setting source spectrum file to fullrun_mos1_xmm0102640101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Wed Jan 25 21:13:43 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0102640101_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Wed Jan 25 21:48:58 2012] Updating aperture counts using extracted products
[Wed Jan 25 21:48:58 2012] Error reading totcts from fullrun_mos1_xmm0102640101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Wed Jan 25 21:48:58 2012] Calculating source flux in energy range 0.30-8.00
[Wed Jan 25 21:48:58 2012] Using photon index=1.80, rate=1.46, arf fullrun_mos1_xmm0102640101_pi300-10000_pass1_cl_src1.arf
[Wed Jan 25 21:48:58 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jan 25 21:48:58 2012] Updating source flux to 1.4e-11
[Wed Jan 25 21:49:23 2012] Reading fit data from xmm0102640101/analysis//spectral/fullrun_mos1_xmm0102640101_pi300-10000_pass1_cl_src1_pl.csv
[Wed Jan 25 21:49:23 2012] Spectral fit parameter nH value = 2.61171e+21
[Wed Jan 25 21:49:23 2012] Spectral fit parameter PhoIndex value = 2.32492
[Wed Jan 25 21:49:23 2012] Failed to get F(0.3-8.0) from xmm0102640101/analysis//spectral/fullrun_mos1_xmm0102640101_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Wed Jan 25 21:49:23 2012] Calculating source flux in energy range 0.30-8.00
[Wed Jan 25 21:49:23 2012] Using Nh = 2.6e+21, photon index=2.32, rate=1.46, arf fullrun_mos1_xmm0102640101_pi300-10000_pass1_cl_src1.arf
[Wed Jan 25 21:49:23 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jan 25 21:49:23 2012] Updating source flux to 1.3e-11