[Sat Sep  8 10:55:05 2012] Detection parameters:
  Position = (415.2, 194.2) = 2 5 37.28 64 48 21.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 214.3 +/- 27.9
  Background counts = 173.8
  Rate = 0.01 +/- 0.002

[Sat Sep  8 10:55:05 2012] Off-axis axis estimate = 11.35'
[Sat Sep  8 12:54:00 2012] Using EEF radius (= 12.10 ")to estimate initial spatial extent for simple fitting
[Sat Sep  8 12:54:00 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Sep  8 12:54:00 2012] Initial guess for spatial extent in simple fitting = 12.10"
[Sat Sep  8 12:54:00 2012] source mask rpix=2.8, npix_max = 43, mask sum = 42, frac = 0.974
[Sat Sep  8 12:54:00 2012] Giving source the simple spatial ID 6 for pass 0, mean size = 12.10"
[Sat Sep  8 14:17:26 2012] fullrun_mos2_xmm0102580801_pi300-10000_cl_pass0_src6.ximg exists
[Sat Sep  8 14:17:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0102580801_pi300-10000_cl_pass0_src6.csv
[Sat Sep  8 14:17:26 2012] fullrun_mos2_xmm0102580801_pi300-10000_cl_pass0_src6_1.ximg exists
[Sat Sep  8 14:17:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0102580801_pi300-10000_cl_pass0_src6.csv
[Sat Sep  8 14:17:26 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0102580801_pi300-10000_cl_pass0_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0102580801_pi300-10000_cl_pass0_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Sep  8 14:17:26 2012] fullrun_mos2_xmm0102580801_pi300-10000_cl_pass0_tfrozen_src6.ximg exists
[Sat Sep  8 14:17:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0102580801_pi300-10000_cl_pass0_tfrozen_src6.csv
[Sat Sep  8 14:17:26 2012] fullrun_mos2_xmm0102580801_pi300-10000_cl_pass0_tfrozen_src6_1.ximg exists
[Sat Sep  8 14:17:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0102580801_pi300-10000_cl_pass0_tfrozen_src6.csv
[Sat Sep  8 14:17:26 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0102580801_pi300-10000_cl_pass0_tfrozen_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0102580801_pi300-10000_cl_pass0_tfrozen_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Sep  8 14:17:42 2012] Spatial fit model total counts = 314.891000, observed total counts = 1736.000000
[Sat Sep  8 14:17:42 2012] Poor agreement between spatial fit and data for source 9
It may help to tweak spatial fit manually
Not incorporating fit results
[Sat Sep  8 14:17:42 2012] Spatial fit model total counts = 1272.590000, observed total counts = 1261.000000
[Sat Sep  8 14:17:42 2012] Offset between fit and detection position for source 9 = 0.377515 pixels
[Sat Sep  8 14:17:42 2012] Warning, changing simple spatial fit ID from 6 to 20
[Sat Sep  8 14:17:42 2012] 1225.068000 total counts/ 1182.230000 bgd. counts: snr = 1.245886
Spatial fit parameters:
  Offset between fit and detection position for source 9 = 0.377515 pixels
  Position = (414.9, 194.4) = 2 5 37.48 64 48 23.0
  Extent = 6.4 (3.1-17.6)", rotation angle = 0
  Source counts = 42.8 +/- 35.0
  Background counts = 1182.2
  Rate = 0.002 +/- 0.002
  Deleting source due to low Poisson probability