[Sat Sep  8 10:54:49 2012] Detection parameters:
  Position = (403.9, 207.1) = 2 5 44.93 64 49 13.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 325.8 +/- 29.8
  Background counts = 169.6
  Rate = 0.02 +/- 0.002

[Sat Sep  8 10:54:50 2012] Off-axis axis estimate = 10.12'
[Sat Sep  8 11:53:29 2012] Using EEF radius (= 11.49 ")to estimate initial spatial extent for simple fitting
[Sat Sep  8 11:53:29 2012] Initial guess for spatial extent in simple fitting = 11.49"
[Sat Sep  8 11:53:29 2012] source mask rpix=2.6, npix_max = 39, mask sum = 27, frac = 0.684
[Sat Sep  8 11:53:29 2012] Giving source the simple spatial ID 2 for pass 0, mean size = 11.49"
[Sat Sep  8 12:53:59 2012] fullrun_mos1_xmm0102580801_pi300-10000_cl_pass0_src2.ximg exists
[Sat Sep  8 12:53:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0102580801_pi300-10000_cl_pass0_src2.csv
[Sat Sep  8 12:53:59 2012] fullrun_mos1_xmm0102580801_pi300-10000_cl_pass0_src2_1.ximg exists
[Sat Sep  8 12:53:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0102580801_pi300-10000_cl_pass0_src2.csv
[Sat Sep  8 12:53:59 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0102580801_pi300-10000_cl_pass0_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0102580801_pi300-10000_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Sep  8 12:53:59 2012] fullrun_mos1_xmm0102580801_pi300-10000_cl_pass0_tfrozen_src2.ximg exists
[Sat Sep  8 12:53:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0102580801_pi300-10000_cl_pass0_tfrozen_src2.csv
[Sat Sep  8 12:53:59 2012] fullrun_mos1_xmm0102580801_pi300-10000_cl_pass0_tfrozen_src2_1.ximg exists
[Sat Sep  8 12:53:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0102580801_pi300-10000_cl_pass0_tfrozen_src2.csv
[Sat Sep  8 12:53:59 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0102580801_pi300-10000_cl_pass0_tfrozen_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0102580801_pi300-10000_cl_pass0_tfrozen_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Sep  8 14:17:36 2012] Warning, spatial fit 2 centroid is now closest to src. 1
[Sat Sep  8 14:17:36 2012] Vigneting correction estimate = 1.000000
[Sat Sep  8 14:17:36 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Sep  8 14:17:36 2012] Assessing source extent using major
[Sat Sep  8 14:17:36 2012] Source does appear to be extended
[Sat Sep  8 14:17:36 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Sep  8 14:17:36 2012] Source is confused with source 2
[Sat Sep  8 15:11:50 2012] Using EEF radius (= 11.49 ")to estimate initial spatial extent for simple fitting
[Sat Sep  8 15:11:50 2012] Initial guess for spatial extent in simple fitting = 11.49"
[Sat Sep  8 15:11:50 2012] source mask rpix=2.6, npix_max = 39, mask sum = 27, frac = 0.684
[Sat Sep  8 15:11:50 2012] Giving source the simple spatial ID 2 for pass 1, mean size = 11.49"
[Sat Sep  8 16:06:51 2012] fullrun_mos1_xmm0102580801_pi300-10000_cl_pass1_src2.ximg exists
[Sat Sep  8 16:06:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0102580801_pi300-10000_cl_pass1_src2.csv
[Sat Sep  8 16:06:51 2012] fullrun_mos1_xmm0102580801_pi300-10000_cl_pass1_src2_1.ximg exists
[Sat Sep  8 16:06:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0102580801_pi300-10000_cl_pass1_src2.csv
[Sat Sep  8 16:06:51 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0102580801_pi300-10000_cl_pass1_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0102580801_pi300-10000_cl_pass1_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Sep  8 16:06:51 2012] fullrun_mos1_xmm0102580801_pi300-10000_cl_pass1_tfrozen_src2.ximg exists
[Sat Sep  8 16:06:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0102580801_pi300-10000_cl_pass1_tfrozen_src2.csv
[Sat Sep  8 16:06:51 2012] fullrun_mos1_xmm0102580801_pi300-10000_cl_pass1_tfrozen_src2_1.ximg exists
[Sat Sep  8 16:06:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0102580801_pi300-10000_cl_pass1_tfrozen_src2.csv
[Sat Sep  8 16:06:51 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0102580801_pi300-10000_cl_pass1_tfrozen_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0102580801_pi300-10000_cl_pass1_tfrozen_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Sep  8 17:02:05 2012] Spatial fit model total counts = 2596.130000, observed total counts = 2276.000000
[Sat Sep  8 17:02:05 2012] Poor agreement between spatial fit and data for source 9
It may help to tweak spatial fit manually
Not incorporating fit results
[Sat Sep  8 17:02:05 2012] Spatial fit model total counts = 1379.570000, observed total counts = 1284.000000
[Sat Sep  8 17:02:05 2012] Offset between fit and detection position for source 9 = 3.408659 pixels
[Sat Sep  8 17:02:05 2012] Warning, changing simple spatial fit ID from 2 to 5
[Sat Sep  8 17:02:05 2012] 1375.650700 total counts/ 1290.460000 bgd. counts: snr = 2.371482
Spatial fit parameters:
  Offset between fit and detection position for source 9 = 3.408659 pixels
  Position = (400.7, 208.2) = 2 5 47.11 64 49 23.5
  Extent = 21.7 (21.4-21.8)", rotation angle = 0
  Source counts = 85.2 +/- 37.1
  Background counts = 1290.5
  Rate = 0.005 +/- 0.002
[Sat Sep  8 17:02:05 2012] Vigneting correction estimate = 1.000000
[Sat Sep  8 17:02:05 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Sep  8 17:02:05 2012] Assessing source extent using major axis lower bound
[Sat Sep  8 17:02:05 2012] Source does appear to be extended
[Sat Sep  8 17:02:05 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Sep  8 17:09:37 2012] XMMSAS src. selection expression = ellipse(34815.636000, 18067.858000, 1302.234037, 1302.234037, 0.000000, X, Y)
[Sat Sep  8 17:09:37 2012] Writing source region out to fullrun_mos1_xmm0102580801_pi300-10000_pass1_cl_src9_src.reg
[Sat Sep  8 17:09:37 2012] Extracting stamp from image fullrun_mos1_xmm0102580801_pi300-10000_cl_sm2.00.img.gz, (326, 133) - (476, 283)
[Sat Sep  8 17:09:37 2012] XMMSAS bgd. selection expression = annulus(34815.636000, 18067.858000, 2170.390062, 4340.780125, X, Y) && !ellipse(35983.707062, 18405.339539, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35535.335800, 17872.266000, 547.108016, 547.108016, 0.000000, X, Y) && !ellipse(35622.693600, 16786.702000, 1941.472056, 573.296816, 315.186000, X, Y) && !ellipse(34238.452759, 18302.758499, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33968.768000, 18465.782000, 3486.656100, 3486.656100, 0.000000, X, Y) && !ellipse(34814.044525, 16790.331680, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37959.247986, 18504.897827, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33913.909943, 19310.028824, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32564.318000, 17326.712000, 1743.328050, 1743.328050, 0.000000, X, Y) && !ellipse(36199.866272, 16550.471024, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33592.348724, 17936.900772, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31169.833618, 18163.086700, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32577.134200, 18664.537000, 1700.656049, 1267.376036, 351.671000, X, Y) && !ellipse(33438.460000, 18907.740200, 1485.528043, 1485.528043, 0.000000, X, Y) && !ellipse(35652.322235, 16287.125305, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Sep  8 17:09:37 2012] Writing fullrun_mos1_xmm0102580801_pi300-10000_pass1_cl_src9.gif
[Sat Sep  8 17:11:26 2012] Mean detx,y = (195.60, 10623.32) 
[Sat Sep  8 17:11:26 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Sep  8 17:11:44 2012] grppha failed
[Sat Sep  8 17:11:45 2012] Setting source spectrum file to fullrun_mos1_xmm0102580801_pi300-10000_pass1_cl_src9_src.pi.gz
[Sat Sep  8 17:11:45 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0102580801_pi300-10000_pass1_cl_src9_bgd.pi.gz
[Sat Sep  8 17:17:37 2012] Not generating rmf since there are only 85 counts
[Sat Sep  8 17:17:37 2012] rmf not generated due to insufficient counts
[Sat Sep  8 17:27:27 2012] Updating aperture counts using extracted products
[Sat Sep  8 17:27:27 2012] Error reading totcts from fullrun_mos1_xmm0102580801_pi300-10000_pass1_cl_src9_src.pi.gz
[Sat Sep  8 17:27:27 2012] No arf file for this source, not re-computing flux
[Sat Sep  8 17:27:28 2012] Flag p found in src. 9 procflags, skipping spectral fitting
[Sat Sep  8 17:27:28 2012] Flag c found in src. 9 procflags, skipping spectral fitting
[Sat Sep  8 17:27:28 2012] Source 9 has fewer than 100.000000 counts, skipping spectral fitting
[Sat Sep  8 17:27:29 2012] xmm0102580801/analysis//spectral/fullrun_mos1_xmm0102580801_pi300-10000_pass1_cl_src9_pl.csv not found, spectral fit skipped or did not complete